- 您現在的位置：買賣IC網 > PDF目錄374015 > ADM8832ACP (ANALOG DEVICES INC) Charge Pump Regulator for Color TFT Panel PDF資料下載
參數資料
| 型號： | ADM8832ACP |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 穩壓器 |
| 英文描述： | Charge Pump Regulator for Color TFT Panel |
| 中文描述： | SWITCHED CAPACITOR REGULATOR, 140 kHz SWITCHING FREQ-MAX, QCC20 |
| 封裝： | 4 X 4 MM, MO-220VGGD-1, LFCSP-20 |
| 文件頁數： | 1/12頁 |
| 文件大小： | 202K |
| 代理商： | ADM8832ACP |
Charge Pump Regulator
for Color TFT Panel
ADM8832
FEATURES
3 output voltages (+5.1 V, +15.3 V, 10.2 V) from one 3 V
input supply
Power efficiency optimized for use with TFT in mobile
phones
Low quiescent current
Low shutdown current (<1 μA)
Fast transient response
Shutdown function
Power saving during blanking period
Option to use external ldo
APPLICATIONS
Handheld instruments
TFT LCD panels
Cellular phones
Rev.
A
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com FUNCTIONAL BLOCK DIAGRAM
LDO
VOLTAGE
REGULATOR
VOLTAGE
DOUBLER
DISCHARGE
C1+
C1–
VOUT
LDO IN
+5VOUT
+5VIN
C2+
C2–
C3+
C3–
+15VOUT
C4+
C4–
–10VOUT
C1
2.2
μ
F
C6
2.2
μ
F
C2
1
μ
F
C7
2.2
μ
F
+5.1V
C3
1
μ
F
+15.3V
C8
1
μ
F
C4
1
μ
F
–10.2V
C9
1
μ
F
VOLTAGE
TRIPLER
DOUBLE
TRIPLE
VOLTAGE
INVERTER
CLKIN
SCAN/
BLANK
LDO_ON/
OFF
GND
V
CC
TIMING
GENERATOR
CONTROL
LOGIC
SHUTDOWN
CONTROL
OSCILLATOR
ADM8832
C5
2.2
μ
F
0
SHDN
Figure 1.
GENERAL DESCRIPTION
The ADM8832 is a charge pump regulator used for color thin
film transistor (TFT) liquid crystal displays (LCD). Using charge
pump technology, the device can be used to generate three
output voltages (+5.1 V ±2%, +15.3 V, 10.2 V) from a single
3 V input supply. These outputs are then used to provide
supplies for the LCD controller (+5.1 V) and the gate drives for
the transistors in the panel (+15.3 V and 10.2 V). Only a few
external capacitors are needed for the charge pumps. An
efficient low dropout voltage regulator also ensures that the
power efficiency is high and provides a low ripple 5.1 V output.
This LDO can be shut down and an external LDO used to
regulate the 5 V doubler output and drive the input to the
charge pump section, which generates the +15.3 V and 10.2 V
outputs if so required by the user.
The ADM8832 has an internal 100 kHz oscillator for use in
scanning mode, but the part must be clocked by an external
clock source in blanking (low current) mode. The internal
oscillator is used to clock the charge pumps during scanning
mode where the current is highest. During blanking periods, the
ADM8832 switches to an external, lower frequency clock. This
allows the user to vary the frequency and maximize power
efficiency during blanking periods. The tolerances on the output
voltages are seamlessly maintained when switching from scan-
ning mode to blanking mode or vice versa.
The ADM8832 power saving features include low power
shutdown and reduced quiescent current consumption during
the blanking periods. The 5.1 V output consumes the most
power, so power efficiency is also maximized on this output
with an oscillator enabling scheme (Green Idle). This
effectively senses the load current that is flowing and turns on
the charge pump only when charge needs to be delivered to the
5 V pump doubler output.
The ADM8832 is fabricated using CMOS technology for minimal
power consumption. The part is packaged in a 20-lead LFCSP
(lead frame chip scale package).
相關PDF資料 |
PDF描述 |
|---|---|
| ADM8832ACP-REEL7 | Charge Pump Regulator for Color TFT Panel |
| ADM8832ACPZ1 | Charge Pump Regulator for Color TFT Panel |
| ADM8832ACP-REEL | Charge Pump Regulator for Color TFT Panel |
| ADM8832ACPZ-REEL | Charge Pump Regulator for Color TFT Panel |
| ADM8832ACPZ-REEL7 | Charge Pump Regulator for Color TFT Panel |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADM8832ACP-REEL | 制造商:AD 制造商全稱:Analog Devices 功能描述:Charge Pump Regulator for Color TFT Panel |
| ADM8832ACP-REEL7 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Charge Pump Regulator for Color TFT Panel |
| ADM8832ACPZ | 功能描述:IC CHARGE PUMP REG TFT 20LFCSP RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 專用型 系列:- 標準包裝:43 系列:- 應用:控制器，Intel VR11 輸入電壓:5 V ~ 12 V 輸出數:1 輸出電壓:0.5 V ~ 1.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-VFQFN 裸露焊盤 供應商設備封裝:48-QFN（7x7） 包裝:管件 |
| ADM8832ACPZ1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Charge Pump Regulator for Color TFT Panel |
| ADM8832ACPZ-REEL | 功能描述:IC CHARGE PUMP REG TFT 20LFCSP RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 專用型 系列:- 標準包裝:43 系列:- 應用:控制器，Intel VR11 輸入電壓:5 V ~ 12 V 輸出數:1 輸出電壓:0.5 V ~ 1.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-VFQFN 裸露焊盤 供應商設備封裝:48-QFN（7x7） 包裝:管件 |
發布緊急采購，3分鐘左右您將得到回復。