欧美成人免费电影,国产欧美一区二区三区精品酒店,精品国产a毛片,色网在线免费观看

參數資料
型號: ADV7180BSTZ
廠商: ANALOG DEVICES INC
元件分類: 顏色信號轉換
英文描述: 10-Bit, 4 x Oversampling SDTV Video Decoder
中文描述: COLOR SIGNAL DECODER, PQFP64
封裝: 10 X 10 MM, ROHS COMPLIANT, MS-026BCD, LQFP-64
文件頁數: 26/112頁
文件大小: 1320K
代理商: ADV7180BSTZ
ADV7180
SD_SAT_Cr[7:0], SD Saturation Cr Channel,
Address 0xE4 [7:0]
This register allows the user to control the gain of the Cr
channel only, which in turn adjusts the saturation of the picture.
Rev. A | Page 26 of 112
Table 25. SD_SAT_Cr Function
SD_SAT_Cr[7:0]
0x80 (default)
0x00
0xFF
Description
Gain on Cr channel = 0 dB
Gain on Cr channel = 42 dB
Gain on Cr channel = +6 dB
SD_OFF_Cb[7:0], SD Offset Cb Channel, Address 0xE1 [7:0]
This register allows the user to select an offset for the Cb
channel only and to adjust the hue of the picture. There is a
functional overlap with the HUE[7:0] register.
Table 26. SD_OFF_Cb Function
SD_OFF_Cb[7:0]
0x80 (default)
0x00
0xFF
Description
0 offset applied to the Cb channel
312 mV offset applied to the Cb channel
+312 mV offset applied to the Cb channel
SD_OFF_Cr [7:0], SD Offset Cr Channel, Address 0xE2 [7:0]
This register allows the user to select an offset for the Cr channel
only and to adjust the hue of the picture. There is a functional
overlap with the HUE[7:0] register.
Table 27. SD_OFF_Cr Function
SD_OFF_Cr[7:0]
0x80 (default)
0x00
0xFF
Description
0 offset applied to the Cr channel
312 mV offset applied to the Cr channel
+312 mV offset applied to the Cr channel
BRI[7:0], Brightness Adjust, Address 0x0A [7:0]
This register controls the brightness of the video signal. It
allows the user to adjust the brightness of the picture.
Table 28. BRI Function
BRI[7:0]
0x00 (default)
0x7F
0x80
Description
Offset of the luma channel = 0IRE
Offset of the luma channel = +100IRE
Offset of the luma channel = –100IRE
HUE[7:0], Hue Adjust, Address 0x0B [7:0]
This register contains the value for the color hue adjustment. It
allows the user to adjust the hue of the picture.
HUE[7:0] has a range of ±90°, with 0x00 equivalent to an
adjustment of 0°. The resolution of HUE[7:0] is 1 bit = 0.7°.
The hue adjustment value is fed into the AM color demodula-
tion block. Therefore, it only applies to video signals that contain
chroma information in the form of an AM-modulated carrier
(CVBS or Y/C in PAL or NTSC). It does not affect SECAM and
does not work on component video inputs (YPrPb).
Table 29. HUE Function
HUE[7:0]
0x00 (default)
0x7F
0x80
Description
(Adjust Hue of the Picture)
Phase of the chroma signal = 0°
Phase of the chroma signal = 90°
Phase of the chroma signal = +90°
DEF_Y[5:0], Default Value Y, Address 0x0C [7:2]
When the ADV7180 loses lock on the incoming video signal or
when there is no input signal, the DEF_Y[5:0] register allows
the user to specify a default luma value to be output. This value
is used under the following conditions:
If DEF_VAL_AUTO_EN bit is set to high and the ADV7180
has lost lock to the input video signal, this is the intended
mode of operation (automatic mode).
The DEF_VAL_EN bit is set, regardless of the lock status of
the video decoder. This is a forced mode that may be
useful during configuration.
The DEF_Y[5:0] values define the six MSBs of the output video.
The remaining LSBs are padded with 0s. For example, in 8-bit
mode, the output is Y[7:0] = {DEF_Y[5:0], 0, 0}.
For DEF_Y[5:0], 0x0D (blue) is the default value for Y.
Register 0x0C has a default value of 0x36.
DEF_C[7:0], Default Value C, Address 0x0D [7:0]
The DEF_C[7:0] register complements the DEF_Y[5:0] value. It
defines the four MSBs of Cr and Cb values to be output if
The DEF_VAL_AUTO_EN bit is set to high and the
ADV7180 cannot lock to the input video (automatic mode).
DEF_VAL_EN bit is set to high (forced output).
The data that is finally output from the ADV7180 for the
chroma side is Cr[7:0] = {DEF_C[7:4], 0, 0, 0, 0}, Cb[7:0] =
{DEF_C[3:0], 0, 0, 0, 0}.
For DEF_C[7:0], 0x7C (blue) is the default value for Cr and Cb.
DEF_VAL_EN, Default Value Enable, Address 0x0C [0]
This bit forces the use of the default values for Y, Cr, and Cb.
Refer to the descriptions in the DEF_Y[5:0], Default Value Y,
Address 0x0C [7:2] and DEF_C[7:0], Default Value C, Address
0x0D [7:0] sections for additional information. In this mode,
the decoder also outputs a stable 27 MHz clock, HS, and VS.
Setting DEF_VAL_EN to 0 (default) outputs a colored screen
determined by user-programmable Y, Cr, and Cb values when
the decoder free-runs. Free-run mode is turned on and off by
the DEF_VAL_AUTO_EN bit.
Setting DEF_VAL_EN to 1 forces a colored screen output
determined by user-programmable Y, Cr, and Cb values. This
overrides picture data even if the decoder is locked.
相關PDF資料
PDF描述
ADV7181 Multiformat SDTV Video Decoder
ADV7181B Multiformat SDTV Video Decoder
ADV7181BBCPZ Multiformat SDTV Video Decoder
ADV7181BBSTZ Multiformat SDTV Video Decoder
ADV7181BCP Multiformat SDTV Video Decoder
相關代理商/技術參數
參數描述
ADV7180BSTZ 制造商:Analog Devices 功能描述:Video IC
ADV7180BSTZ-REEL 功能描述:IC VIDEO DECODER SDTV 64-LQFP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 標準包裝:250 系列:- 類型:電平移位器 應用:LCD 電視機/監控器 安裝類型:表面貼裝 封裝/外殼:28-WFQFN 裸露焊盤 供應商設備封裝:28-WQFN(4x4)裸露焊盤 包裝:帶卷 (TR) 其它名稱:296-32523-2TPS65198RUYT-ND
ADV7180KCP32Z 功能描述:IC VIDEO DECODER 10BIT 32LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 產品變化通告:Product Discontinuation 07/Mar/2011 標準包裝:3,000 系列:OMNITUNE™ 類型:調諧器 應用:移動電話,手機,視頻顯示器 安裝類型:表面貼裝 封裝/外殼:65-WFBGA 供應商設備封裝:PG-WFSGA-65 包裝:帶卷 (TR) 其它名稱:SP000365064
ADV7180KCP32Z-RL 功能描述:IC VIDEO DECODER 10BIT 32LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 產品變化通告:Product Discontinuation 07/Mar/2011 標準包裝:3,000 系列:OMNITUNE™ 類型:調諧器 應用:移動電話,手機,視頻顯示器 安裝類型:表面貼裝 封裝/外殼:65-WFBGA 供應商設備封裝:PG-WFSGA-65 包裝:帶卷 (TR) 其它名稱:SP000365064
ADV7180KST48Z 功能描述:IC VID DECOD SDTV 10BIT 48LQFP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 產品變化通告:Product Discontinuation 07/Mar/2011 標準包裝:3,000 系列:OMNITUNE™ 類型:調諧器 應用:移動電話,手機,視頻顯示器 安裝類型:表面貼裝 封裝/外殼:65-WFBGA 供應商設備封裝:PG-WFSGA-65 包裝:帶卷 (TR) 其它名稱:SP000365064
主站蜘蛛池模板: 沙田区| 衡阳市| 剑阁县| 怀柔区| 顺义区| 犍为县| 开江县| 兴仁县| 平陆县| 湘潭市| 灵武市| 武城县| 泰来县| 文山县| 建平县| 京山县| 南木林县| 肃南| 鄂伦春自治旗| 休宁县| 凤台县| 临颍县| 环江| 定边县| 无棣县| 安西县| 徐闻县| 洪泽县| 陇南市| 屏南县| 龙州县| 乾安县| 沽源县| 嘉定区| 三门峡市| 泊头市| 马山县| 玉山县| 青铜峡市| 静宁县| 柏乡县|