
COP888FH
8-Bit CMOS ROM Based Microcontrollers with 12k
Memory, Comparators, USART and Hardware
Multiply/Divide
General Description
The COP888FH Family of ROM based microcontrollers are
highly integrated COP8
Feature core devices with 12k
memory and advanced features including Analog compara-
tors, and Hardware Multiply/Divide. These single-chip
CMOS devices are suited for more complex applications re-
quiring a full featured controller, low EMI, two comparators, a
full-duplex USART, and hardware multiply/divide functions.
COP87L88FH devices are pin and software compatible (dif-
ferent V
CC
range) 16k OTP (One Time Programmable) ver-
sions for pre-production , and for use with a range of COP8
software and hardware development tools.
Family features include an 8-bit memory mapped architec-
ture, 10 MHz CKI with 1μs instruction cycle, hardware
multiply/divide functions, three multi-function 16-bit timer/
counters with PWM, full duplex USART, MICROWIRE/
PLUS
, two Analog comparators, two power saving HALT/
IDLE modes, MIWU, idle timer, high current outputs,
software selectable options WATCHDOG
and clock/
oscillator mode, low EMI 2.5V to 5.5V operation, and 28/
40/44 pin packages.
Devices included in this data sheet are:
Device
COP684FH
COP884FH
COP984FH
Memory (bytes)
12k ROM
12k ROM
12k ROM
RAM (bytes)
512
512
512
I/O Pins
24
24
24
Packages
28 DIP/SOIC
28 DIP/SOIC
28 DIP/SOIC
Temperature
-55 to +125C
-40 to +85C
0 to +70C
Comments
4.5V to 5.5V
2.5V to 4.0V, FHH=4.0V to
6.0V
4.5V to 5.5V
COP688FH
COP888FH
COP988FH
12k ROM
12k ROM
12k ROM
512
512
512
36/40
36/40
36/40
40 DIP, 44 PLCC
40 DIP, 44 PLCC
40 DIP, 44 PLCC
-55 to +125C
-40 to +85C
0 to +70C
2.5V to 4.0V, FHH=4.0V to
6.0V
Key Features
n
Hardware Multiply/Divide Functions
n
Full duplex USART
n
Three 16-bit timers, each with two 16-bit registers
supporting:
— Processor Independent PWM mode
— External Event counter mode
— Input Capture mode
n
Quiet design (low radiated emissions)
n
12 kbytes on-board ROM
n
512 bytes on-board RAM
Additional Peripheral Features
n
Idle Timer
n
Multi-Input Wakeup (MIWU) with optional interrupts (8)
n
Two analog comparators
n
WATCHDOG and Clock Monitor logic
n
MICROWIRE/PLUS serial I/O
I/O Features
n
Software selectable I/O options ( TRI-STATE
,
Push-Pull, Weak Pull-Up, and High Impedance Input)
n
Schmitt trigger inputs on ports G and L
n
Packages:
— 40 DIP with 36 I/O pins
— 44 PLCC with 40 I/O pins
— 28 DIP/SO with 24 I/O pins
CPU/Instruction Set Features
n
1 μs instruction cycle time
n
Fourteen multi-source vectored interrupts servicing
— External Interrupt
— Idle Timer T0
— Three Timers (Each with 2 Interrupts)
— MICROWIRE/PLUS
— Multi-Input Wake Up
— Software Trap
— USART (2)
— Default VIS (default interrupt)
n
Versatile and easy to use instruction set
COP8
is a trademark of National Semiconductor Corporation.
MICROWIRE
is a trademark of National Semiconductor Corporation.
MICROWIRE/PLUS
is a trademark of National Semiconductor Corporation.
TRI-STATE
is a registered trademark of National Semiconductor Corporation.
WATCHDOG
is a trademark of National Semiconductor Corporation.
iceMASTER
is a trademark of MetaLink Corporation.
September 1999
C
H
2000 National Semiconductor Corporation
DS012602
www.national.com