- 您現在的位置：買賣IC網 > PDF目錄376726 > DJIXE972MLAA4 (Intel Corp.) Single-Port 10/100 Mbps PHY Transceiver PDF資料下載
參數資料
| 型號： | DJIXE972MLAA4 |
| 廠商： | Intel Corp. |
| 英文描述： | Single-Port 10/100 Mbps PHY Transceiver |
| 中文描述： | 單端口10/100 Mbps的物理層收發器 |
| 文件頁數： | 51/92頁 |
| 文件大小： | 666K |
| 代理商： | DJIXE972MLAA4 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁當前第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁
Intel
LXT972M Single-Port 10/100 Mbps PHY Transceiver
Datasheet
Document Number: 302875-005
Revision Date: 27-Oct-2005
51
5.8.4
10BASE-T Link Integrity Test
In 10BASE-T mode, the LXT972M Transceiver always transmits link pulses.
If the Link Integrity Test function is enabled (the normal configuration), the LXT972M
Transceiver monitors the connection for link pulses. Once link pulses are detected, data
transmission is enabled and remains enabled as long as either the link pulses or data
transmission continue. If the link pulses stop, the data transmission is disabled.
If the Link Integrity Test function is disabled (which can be done by setting Configuration
Register bit 16.14 to ‘1’), the LXT972M Transceiver transmits to the connection regardless of
detected link pulses.
5.8.5
Link Failure
Link failure occurs if the Link Integrity Test is enabled and link pulses or packets stop being
received. If this condition occurs, the LXT972M Transceiver returns to the auto-negotiation phase
if auto-negotiation is enabled. If the Link Integrity Test function is disabled by setting
Configuration Register bit 16.14 to ‘1’, the LXT972M Transceiver transmits packets, regardless of
link status.
5.8.6
10BASE-T SQE (Heartbeat)
By default, the Signal Quality Error (SQE) or heartbeat function is disabled on the LXT972M
Transceiver. To enable this function, set Register bit 16.9 = 1. When this function is enabled, the
LXT972M Transceiver asserts its COL output for 5 to 15 bit times (BT) after each packet.
5.8.7
10BASE-T Jabber
If a transmission exceeds the jabber timer, the LXT972M Transceiver disables the transmit and
loopback functions. For jabber timing parameters, see
Figure 26, “Intel LXT972M Transceiver
10BASE-T Jabber and Unjabber Timing” on page 69
.
The LXT972M Transceiver automatically exits jabber mode after the unjabber time has expired.
This function can be disabled by setting Register bit 16.10 = 1.
5.8.8
10BASE-T Polarity Correction
The LXT972M Transceiver automatically detects and corrects for the condition in which the
receive signal (TPIP/N) is inverted. Reversed polarity is detected if eight inverted link pulses - or
four inverted end-of-frame (EOF) markers - are received consecutively. If link pulses or data are
not received by the maximum receive time-out period (96 to 128 ms), the polarity state is reset to a
non-inverted state. When polarity reversal is detected in 10BASE-T operation, register 17.5 is set
to 1. (For details, see bit 17.5 in
Table 52, “Status Register #2 - Address 17, Hex 11” on page 85
.)
相關PDF資料 |
PDF描述 |
|---|---|
| DJIXE972MLCA4 | Single-Port 10/100 Mbps PHY Transceiver |
| DJIXF972MLCA4 | Single-Port 10/100 Mbps PHY Transceiver |
| DJIXF972MLEA4 | Single-Port 10/100 Mbps PHY Transceiver |
| DJIXF972MNAA4 | Single-Port 10/100 Mbps PHY Transceiver |
| DJIXF972MNCA4 | Single-Port 10/100 Mbps PHY Transceiver |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DJIXE972MLCA4 | 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Single-Port 10/100 Mbps PHY Transceiver |
| DJIXE972MLEA4 | 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Single-Port 10/100 Mbps PHY Transceiver |
| DJIXE972MNAA4 | 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Single-Port 10/100 Mbps PHY Transceiver |
| DJIXE972MNCA4 | 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Single-Port 10/100 Mbps PHY Transceiver |
| DJIXE972MNEA4 | 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Single-Port 10/100 Mbps PHY Transceiver |
發布緊急采購，3分鐘左右您將得到回復。