- 您現在的位置：買賣IC網 > PDF目錄384298 > ES1988S (Electronic Theatre Controls, Inc.) PCI Audio-Modem Accelerator Product Brief PDF資料下載
參數資料
| 型號： | ES1988S |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | PCI Audio-Modem Accelerator Product Brief |
| 中文描述： | PCI音頻，調制解調器加速器產品簡介 |
| 文件頁數： | 1/6頁 |
| 文件大小： | 54K |
| 代理商： | ES1988S |
ESS Technology, Inc.
SAM0368-030601
1
ESS Technology, Inc.
ES1988 Allegro
PCI Audio-Modem
Accelerator
Product Brief
DESCRIPTION
The ES1988 Allegro
PCI audio-modem accelerator combines
advanced audio and modem functionality in a highly integrated
PCI solution. Utilizing one PCI load, the ES1988 provides a two-
chip audio-modem solution with digital interface capability to an
AC‘97 codec in the dock (a.k.a. digital docking). The ES1988 is
designed to provide a low-cost, high-performance solution for
notebook PC applications.
The high-bandwidth PCI bus and an integrated high-fidelity
codec are utilized to deliver advanced PC audio features, such
as DirectSound
acceleration and HRTF 3D positional audio.
The ES1988 implements multistream DirectSound and
DirectSound3D acceleration with digital mixing, sample rate
conversion, and HRTF 3D filtering for two-speaker 3D positional
audio.
The programmable audio signal processor provides support for
multiple audio streams. With its built-in DSP core, the ES1988
uses its dedicated direct memory access (DMA) engine to handle
complex signal processing tasks with a bus-mastering PCI
interface. The support functions ensure efficient transfer of audio
data streams to and from system memory buffers, providing a
system solution with maximum performance and minimal host
CPU loading. The architecture enables implementation of
communications over the Internet from multiple sources.
The ES1988 maintains full DOS legacy audio compatibility over
the standard PCI 2.1 and PCI 2.2 bus. Full DOS game
compatibility is ensured through either PC/PCI, distributed DMA
(DDMA), or transparent DMA (TDMA).
The ES1988 includes an HSP modem interface via its secondary
AC-Link connecting with the ES2828 MC‘97 codec. The MC‘97
is used as the analog front end for the modem and DAA control.
The V.90 modem runs on the host while the ES1988 serves as
the bidirectional buffer for data transmission and reception. The
modem functions include the standard AT command set, V.42
bis
and Group 3 fax.
The ES1988 provides a high-quality docking solution through
proven AC-link-based digital docking. This is accomplished by
using only a five-wire digital connection. The secondary AC‘97
link (extension 2.1 compliant) of the ES1988 interfaces to a
secondary AC‘97 codec in the dock to provide high-quality audio
in the dock.
The ES1988, which operates at 3.3V digitally and 5.0V in analog,
is compliant with the Advanced Power Management (APM) 1.2,
Advanced Configuration and Power Interface (ACPI) 1.0, and
PCI Power Management Interface (PPMI) 1.0. The ES1988
supports D0, D1, D2, and D3 (hot and cold) power-saving modes
for power efficiency when the audio system is both active and
idle. CLKRUN# support is also available.
The ES1988 is available in an industry-standard 100-pin low-
profile quad flat pack (LQFP) package.
AUDIO FEATURES
High-performance single-chip PCI audio acceleration
Integrated high-fidelity AC‘97 codec
Multistream DirectSound and DirectSound 3D acceleration
Sensaura
CRL positional 3D
High-quality sample rate conversion and digital mixing
Direct music support
Realtime effects processing
S/PDIF output for PCM or AC-3 content
Full legacy DOS game support, using TDMA, PC/PCI, or DDMA
hardware implementation methods
Supports one additional PCI bus master devices
HSP modem interface via MC‘97 link
Digital docking via secondary AC-Link
MODEM FEATURES
Data mode capabilities:
—–
V.90 56 kbps
—–
V.34 33.6 kbps and fallbacks
—–
Standard AT command set
—–
V.42 (LAPM) and MNP error correction
—–
V.42
bis
/MNP 5 data compression
—–
3.3V power supply with 5V-tolerant inputs
Fax mode capabilities:
—–
ITU-T V.17, V.21 ch2, V.27ter, V.29
—–
Group 3 (TIA/EIA 578 Class 1 and Class 2)
Supports wake-on-ring from
D3
hot
and
D3
cold
states
POWER MANAGEMENT
Compliance with APM 1.2, ACPI 1.0, and PPMI 1.1
Compliance with Intel’s Mobile Power Guidelines ‘99
3.3V digital operation with 5V-tolerant inputs
5.0V analog operation
COMPATIBILITY
Supports PC DOS games and applications for Sound Blaster
and SoundBlaster Pro
Meets PC99 /PC2001and WHQL specifications
Compliant with Intel’s audio-modem riser card and mini-PCI
specifications
相關PDF資料 |
PDF描述 |
|---|---|
| ES1PA | High Current Density Surface Mount Ultrafast Rectifiers |
| ES1PB | High Current Density Surface Mount Ultrafast Rectifiers |
| ES1PC | High Current Density Surface Mount Ultrafast Rectifiers |
| ES1PD | High Current Density Surface Mount Ultrafast Rectifiers |
| ES2838 | V.90/V.92 PCI HSP Modem Product Brief |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ES199 | 功能描述:STENCIL CLEANER CONCENTRATE RoHS:否 類別:靜電控制，ESD，無塵室產品 >> 處理劑，清潔劑，擦拭布 系列:Eco-Rite™ 標準包裝:100 系列:- 處理劑/清潔劑類型:清潔布 使用:電子設備 技術規格:無絨毛，微纖維 數量:100（12" L x 12" W） 包裝:袋 |
| ES1990S | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC |
| ES1992S | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC |
| ES1A | 功能描述:整流器 1.0a Rectifier UF Recovery RoHS:否 制造商:Vishay Semiconductors 產品:Standard Recovery Rectifiers 配置: 反向電壓:100 V 正向電壓下降: 恢復時間:1.2 us 正向連續電流:2 A 最大浪涌電流:35 A 反向電流 IR:5 uA 安裝風格:SMD/SMT 封裝 / 箱體:DO-221AC 封裝:Reel |
| ES1A F2 | 制造商:SKMI/Taiwan 功能描述:Diode Switching 50V 1A 2-Pin SMA T/R |
發布緊急采購，3分鐘左右您將得到回復。