- 您現在的位置：買賣IC網 > PDF目錄375853 > FM8P51EF (Electronic Theatre Controls, Inc.) EPROM/ROM-Based 8-Bit Microcontroller PDF資料下載
參數資料
| 型號： | FM8P51EF |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | EPROM/ROM-Based 8-Bit Microcontroller |
| 中文描述： | 存儲器/基于ROM的8位微控制器 |
| 文件頁數： | 30/60頁 |
| 文件大小： | 369K |
| 代理商： | FM8P51EF |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁當前第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁
FM8P51
Rev1.2 Mar 15, 2005
P.30/FM8P51
FEELING
TECHNOLOGY
FIGURE 2.10: SPI Mode Timing (Master Mode)
2.7.2 Slave Mode
2.7.2.1 Slave Mode with SSE Control (SSEMOD = 0)
In this slave mode, the data is transmitted and received as the external clock pulses appear on SCK pin. Once the
SPI shift register enable bit SSE (SPICON<4>) has been set to “1”, data in SPITXB will be loaded into SPISR and
start to shift in/out, then transmit buffer empty detect bit (TXBF), and interrupt flag bits (SPITXIF, TXBFIF) are set.
And then user could write the next byte data to SPITXB register before the 8-bit data transmission is completed if
needed. Once the 8-bits of data have been received, the data in SPISR will be moved to the SPIRCB register, then
buffer full detect bit (RCBF), interrupt flag bits (SPIRCIF, RCBFIF) are set. And then user could read out the SPIRCB
register before next 8-bit data transmission is completed if needed.
The SSB pin allows a synchronous slave mode. The SPI must be in slave mode with SSB pin control enabled
(SPICON<2:0> = 101). When the SSB pin is low, transmission and reception are enabled and the SDO pin is driven.
When the SSB pin goes high, the SDO pin is no longer driven, even if in the middle of transmitted byte, and
becomes a floating output. External pull-up/pull-down resistors may be desirable, depending on the application.
When the SPI module resets, the bit counter is forced to 0. This can be done by forcing the SSB pin to high level or
clearing the SPION bit (SPICON<6>).
How to transmit/receive data in this slave mode:
1. Enable SPI function by setting the SPION (SPICON<6>) bit.
2. Enable/disable the SSB pin control by programming SPIM2:SPIM0 (SPICON<2:0>) bits.
3. Write the data that you want to transmit to SPITXB register if needed.
4. Set SSE (SPICON<4>) bit and wait the external clock pulses appear on SCK pin to start transmit.
5. When the 8-bit data transmission starts, both of the SPITXIF and TXBFIF interrupt flags will set to 1. Besides,
both of these bits are cleared by software. The TXBF flag also will be set to “1”, cleared by software or by
writting data to SPITXB register.
6. Write next new data to SPITXB register before this byte transmission being finished if needed.
7. When the 8-bit data transmission is over, the SSE bit will be reset to “0” by hardware. Therefore, if user want to
transmit/receive another 8-bit data, user must set SSE bit to “1” again before next clock pulse appearing SCK
pin.
8. When the 8-bit data transmission is completed, both of the SPIRCIF and RCBFIF interrupt flags will set to 1.
cleared by
read SPIRCB
RCBF
Read from SPIRCB
(if needed)
by H/W
SPISR to
SPIRCB
by H/W
SPITXB to
SPISR
by H/W
Write to SPITXB
(if needed)
SSE (optional)
by S/W
by H/W
cleared by write next byte to SPITXB
TXBF
bit7
SDI
bit0
bit7
SDO
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
bit7
bit6
SCK (CKE=0)
SCK (CKE=1)
相關PDF資料 |
PDF描述 |
|---|---|
| FM8P51EP | EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P51F | EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P51P | EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P51E | EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P54 | EPROM/ROM-Based 8-Bit Microcontroller Series |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FM8P51EP | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P51F | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P51P | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EPROM/ROM-Based 8-Bit Microcontroller |
| FM8P54 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EPROM/ROM-Based 8-Bit Microcontroller Series |
| FM8P54E | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EPROM/ROM-Based 8-Bit Microcontroller Series |
發布緊急采購，3分鐘左右您將得到回復。