- 您現在的位置：買賣IC網 > PDF目錄375859 > FMM5054VF (SUMITOMO ELECTRIC DEVICE INNOVATIONS, INC.) Ku Band Power Amplifier MMIC PDF資料下載
參數資料
| 型號： | FMM5054VF |
| 廠商： | SUMITOMO ELECTRIC DEVICE INNOVATIONS, INC. |
| 英文描述： | Ku Band Power Amplifier MMIC |
| 中文描述： | Ku波段功率放大器單片 |
| 文件頁數： | 14/16頁 |
| 文件大小： | 218K |
| 代理商： | FMM5054VF |
14
1. Screw Mounting
(1) The flange of package may be attached using screws. Torque conditions are
shown in table 1.
Table 1. Recommended and Maximum Torque for Screw Mounting
Package
Recommended
screw
Recommended
Torque
Maximum Torque
VF
M2.0
10 N-cm (0.9 lb-in)
15 N-cm (1.3 lb-in)
(2) First, tighten the screws with a torque driver set to 5 N-cm.
(3) The surface finish of the heat sink should be better than 0.8
μ
m, and the surface
flatness must be better than 10
μ
m.
(4) Silicon based heat sink compounds should not be used for the thermal
conductive grease. They cause poor grounding of the source flange,
contamination and long term degradation of thermal resistance between the FET
package and heat sink.
2. Solder Mounting
(1) Recommended solder are Tin-Lead solder (63Sn/37Pb), Lead-Free solder (Sn-
3.0Ag-0.5Cu)*
1
or equivalent.
(2) For soldering, Tin-Lead solder (63Sn/37Pb) or Lead-Free solder (Sn-3.0Ag-
0.5Cu)*
1
shall be used. (*1: The figure displays with weight %. A predominantly
tin-rich alloy with 3.0% silver and 0.5% copper.)
(3) Recommended Flux is Rosin type with chlorine content: 0.2% or less and a low
halogen content. After soldering, the flux residue should be removed by
appropriate cleaning methods.
(4) The recommended soldering conditions are as follows:
Partial heating method (soldering iron, spot laser/air)
Product terminal temperature: 260 deg-C, max. 10 s./terminal or
400 deg-C, max. 3 s./terminal
■
Mounting Instructions for VF Package
Ku band Power Amplifier MMIC
FMM5054VF
相關PDF資料 |
PDF描述 |
|---|---|
| FMM5056VF | 5.8-7.2GHz Power Amplifier MMIC |
| FMM5057VF | 14 POS DUAL ROW SOCKET |
| FMM5057X | C-Band Power Amplifier MMIC |
| FMM5059VF | Ku Band Power Amplifier MMIC |
| FMM5063X | Ku-Band Power Amplifier MMIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FMM5056VF | 制造商:SUMITOMO ELECTRIC Device Innovations Inc 功能描述:C to Ka-Band, Power Amplifier MMIC, 5.8-7.2GHz, 34dBm, 1100mA, Bulk |
| FMM5057VF | 制造商:SUMITOMO ELECTRIC Device Innovations Inc 功能描述:C to Ka-Band, Power Amplifier MMIC, 7.1-8.5GHz, 34dBm, 1100mA, Bulk |
| FMM5057X | 制造商:EUDYNA 制造商全稱:Eudyna Devices Inc 功能描述:C-Band Power Amplifier MMIC |
| FMM5059VF | 制造商:SUMITOMO ELECTRIC Device Innovations Inc 功能描述:Ku to V-Band, Power Amplifier MMIC, 13.75-14.5GHz, 35dBm, 1600mA, Bulk |
| FMM5061VF | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:X-Band Power Amplifier MMIC |
發布緊急采購，3分鐘左右您將得到回復。