- 您現在的位置：買賣IC網 > PDF目錄385311 > GS1559-CB (Gennum Corporation) GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver PDF資料下載
參數資料
| 型號： | GS1559-CB |
| 廠商： | Gennum Corporation |
| 英文描述： | GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver |
| 中文描述： | GS1559的HD - LINX進程，商標第二多速率解串器與環通電纜驅動器 |
| 文件頁數： | 55/74頁 |
| 文件大小： | 686K |
| 代理商： | GS1559-CB |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁當前第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁
GS1559 Data Sheet
30572 - 4
July 2005
55 of 74
4.10.5.3 Lock Error Detection
The LOCKED pin of the GS1559 indicates the lock status of the reclocker and lock
detect blocks of the device. Only when the LOCKED pin is asserted HIGH has the
device correctly locked to the received data stream, (see
Lock Detect on page 31
).
The GS1559 will also indicate lock error to the host interface when LOCKED =
LOW by setting the LOCK_ERR bit in the ERROR_STATUS register HIGH.
4.10.5.4 Ancillary Data Checksum Error Detection
The GS1559 will calculate checksums for all received ancillary data and compare
the calculated values to the received checksum words. If a mismatch is detected,
the error is flagged in the CCS_ERR and/or YCS_ERR bits of the
ERROR_STATUS register.
When operating in HD mode, (SD/HD = LOW), the device will make comparisons
on both the Y and C channels separately. If an error condition in the Y channel is
detected, the YCS_ERR bit will be set HIGH. If an error condition in the C channel
is detected, the CCS_ERR bit will be set HIGH.
When operating in SD mode, (SD/HD = HIGH), only the YCS_ERR bit will be set
HIGH when checksum errors are detected.
Although the GS1559 will calculate and compare checksum values for all ancillary
data types by default, the host interface may program the device to check only
certain types of ancillary data checksums.
This is accomplished via the ANC_TYPE register as described in
Programmable
Ancillary Data Detection on page 45
.
FF_LINE_START_F0
Address: 016h
15-10
–
Not Used.
–
–
9-0
FF_LINE_START_F0[9:0]
Field 0 Full Field start line data used to set EDH
calculation range outside of SMPTE RP 165
values.
R/W
0
FF_LINE_END_F0
Address: 017h
15-10
–
Not Used.
–
–
9-0
FF_LINE_END_F0[9:0]
Field 0 Full Field start line data used to set EDH
calculation range outside of SMPTE RP 165
values.
R/W
0
FF_LINE_START_F1
Address: 018h
15-10
–
Not Used.
–
–
9-0
FF_LINE_START_F1[9:0]
Field 1 Full Field start line data used to set EDH
calculation range outside of SMPTE RP 165
values.
R/W
0
FF_LINE_END_F1
Address: 019h
15-10
–
Not Used.
–
–
9-0
FF_LINE_END_F1[9:0]
Field 1 Full Field end line data used to set EDH
calculation range outside of SMPTE RP 165
values.
R/W
0
Table 4-13: Host Interface Description for EDH Calculation Range Registers (Continued)
Register Name
Bit
Name
Description
R/W
Default
相關PDF資料 |
PDF描述 |
|---|---|
| GS1559-CBE2 | GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver |
| GS2905 | 500mA CMOS LDO Voltage Regulator |
| GS2905X15 | 500mA CMOS LDO Voltage Regulator |
| GS2905X18 | 500mA CMOS LDO Voltage Regulator |
| GS2905X25 | 500mA CMOS LDO Voltage Regulator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GS1559CBE2 | 制造商:Gennum Corporation 功能描述:DESERIALISER HD/SDI/ASI W/DRV 100BGA 制造商:Gennum Corporation 功能描述:DESERIALISER, HD/SDI/ASI, W/DRV, 100BGA |
| GS1559-CBE2 | 功能描述:RF, RFID, WIRELESS RoHS:是 類別:集成電路 (IC) >> 接口 - 串行器，解串行器 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 功能:解串器 數據速率:2.5Gbps 輸入類型:串行 輸出類型:并聯 輸入數:- 輸出數:24 電源電壓:1.8 V ~ 3.3 V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:64-TQFP 裸露焊盤 供應商設備封裝:64-TQFP-EP（10x10） 包裝:管件 |
| GS1560 | 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX II Voltage Controlled Oscillator |
| GS1560A | 制造商:Gennum Corporation 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。