- 您現在的位置：買賣IC網 > PDF目錄370477 > HD74HC190 (Hitachi,Ltd.) Octal Buffers/Drivers With 3-State Outputs 20-CDIP -55 to 125 PDF資料下載
參數資料
| 型號： | HD74HC190 |
| 廠商： | Hitachi,Ltd. |
| 英文描述： | Octal Buffers/Drivers With 3-State Outputs 20-CDIP -55 to 125 |
| 中文描述： | 同步向上/向下十年,4 -位二進制計數器（單時鐘線） |
| 文件頁數： | 1/13頁 |
| 文件大小： | 75K |
| 代理商： | HD74HC190 |
HD74HC190/HD74HC191
Synchronous Up/Down Decade Counter (Single Clock Line)
Synchronous Up/Donw 4-bit Binary Counter (Single Clock Line)
Description
The HD74HC190 and HD74HC191 are synchronous, reverside up/down counters. The HD74HC190 is a
4-bit decade counter and the HD74HC191 is a 4-bit binary counter. Synchronous counting operation is
provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each
other when so instructed by the steering logic. This mode of operation eliminates the output counting
spikes normally associated with asynchronous (ripple clock) counters.
The outputs of the four flip-flops are triggered on a low-to-high-level transition of the clock input if the
Enable G input is low. A high at Enable G inhibits counting. The direction of the count is determined by
the level of the Down/ Up (D/
U
) input. When D/
U
is low, the counter counts up and when D/
U
is high, it
counts down.
These counters feature a fully independent clock circuit. Changes at the control inputs (D/
U
) that will
modify the operating mode have no effect on the contents of the counter until clocking occurs. The
function of the counter will be dictated solely by the condition meeting the stable setup and hold times.
These counters are fully programmable; that is, the outputs may each be preset to either level by placing a
low on the load input and entering the desired data at the data inputs. The output will change to agree with
the data inputs independently of the level of the clock input. This feature allows the counters to be used as
modulo-N dividers by simply modifying the count length with the preset inputs.
Two outputs have been made available to perform the cascading function. Ripple clock and
maximum/minimum count. The latter output produces a high-level output pulse with a duration
approximately qual to one complete cycle of the clock while the count is zero (all outputs low) counting
down or maximum (9 or 15) counting up. The ripple clock output produces a low-level output pulse under
those same conditions but only while the clock input is low. The counters can be easily cascaded by
feeding the ripple clock output to the enable input of the succeeding counter if parallel clocking is used, or
to the clock input if paralle enabling is used. The maximum/minimum count output can be used to
accomplish look-ahead for high-speed operation.
相關PDF資料 |
PDF描述 |
|---|---|
| HD74HC191 | Synchronous Up/Down Decade,4-bit Binary Counter(Single Clock Line) |
| HD74HC192 | Synchronous Up/Down Decade,4-bit Binary Counter(Dual Clock Line) |
| HD74HC193 | Synchronous Up/Down Decade,4-bit Binary Counter(Dual Clock Line) |
| HD74HC194 | 4-bit Bidirectional Universal Shift Register |
| HD74HC195 | 4-bit Parallel-Access Shift Register |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HD74HC190FP(E) | 制造商:Renesas Electronics Corporation 功能描述: |
| HD74HC190P-E | 制造商:Renesas Electronics 功能描述:74HC Counter |
| HD74HC192FP | 制造商:Renesas Electronics 功能描述:74HC 4-Bit Binary Up / Down Counter with Preset 制造商:Renesas Electronics 功能描述:74HC 4-Bit Binary Up / Down Counter with Preset Bulk |
| HD74HC192FP-E | 制造商:Renesas Electronics 功能描述:74HC 4-Bit Binary Up / Down Counter with Preset |
| HD74HC192P | 制造商:Renesas Electronics 功能描述:74HC 4-Bit Binary Up / Down Counter with Preset Bulk |
發布緊急采購，3分鐘左右您將得到回復。