
1
HIP6006
Buck and Synchronous-Rectifier
Pulse-Width Modulator (PWM) Controller
The HIP6006 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive two
N Channel MOSFETs in a synchronous-rectified buck
topology. The HIP6006 integrates all of the control, output
adjustment, monitoring and protection functions into a single
package.
The output voltage of the converter can be precisely
regulated to as low as 1.27V, with a maximum tolerance of
±
1% over temperature and line voltage variations.
The HIP6006 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/
μ
s slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0% to 100%.
The HIP6006 protects against over-current conditions by
inhibiting PWM operation. The HIP6006 monitors the current
by using the r
DS(ON)
of the upper MOSFET which eliminates
the need for a current sensing resistor.
Pinout
HIP6006
(SOIC, TSSOP)
TOP VIEW
Features
Drives Two N-Channel MOSFETs
Operates From +5V or +12V Input
Simple Single-Loop Control Design
- Voltage-Mode PWM Control
Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
Excellent Output Voltage Regulation
- 1.27V Internal Reference
-
±
1% Over Line Voltage and Temperature
Over-Current Fault Monitor
- Does Not Require Extra Current Sensing Element
- Uses MOSFETs r
DS(ON)
Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to Over 1MHz
14 Pin, SOIC and TSSOP Package
Pb-Free Available (RoHS Compliant)
Applications
Power Supply for Pentium, Pentium Pro, PowerPC
and Alpha Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
8
9
10
11
12
13
14
7
6
5
4
3
2
1
OCSET
SS
EN
COMP
FB
RT
VCC
LGATE
PGND
BOOT
UGATE
PHASE
GND
PVCC
Ordering Information
PART NUMBER
TEMP.
RANGE (
o
C)
PACKAGE
PKG.
DWG. #
HIP6006CB
0 to 70
14 Ld SOIC
M14.15
HIP6006CB-T
0 to 70
14 Ld SOIC) (T&R)
M14.15
HIP6006CBZ (Note)
0 to 70
14 Ld SOIC (Pb-free) M14.15
HIP6006CBZ-T
(Note)
0 to 70
14 Ld SOIC) (T&R)
(Pb-free)
M14.15
HIP6006CV
0 to 70
14 Ld TSSOP
M14.173
HIP6006CV-T
0 to 70
14 Ld TSSOP (T&R) M14.173
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both
SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Data Sheet
April 1, 2005
FN4306.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
PowerPC is a trademark of IBM.
Alpha is a trademark of Digital Equipment Corporation.
Pentium is a registered trademark of Intel Corporation.