
1
September 1997
HIP6011
Buck Pulse-Width Modulator (PWM) Controller
and Output Voltage Monitor
Features
Drives N-Channel MOSFET
Operates From +5V or +12V Input
Simple Single-Loop Control Design
- Voltage-Mode PWM Control
Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
Excellent Output Voltage Regulation
- 1.27V Internal Reference
-
±
1.5% Over Line Voltage and Temperature
Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element
- Uses MOSFET’s r
DS(ON)
Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable
from 50kHz to Over 1MHz
Applications
Power Supply for Pentium, Pentium-Pro,
PowerPC and Alpha Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
Description
The HIP6011 provides complete control and protection for a
DC-DC converter optimized for high-performance micropro-
cessor applications. It is designed to drive an N-Channel
MOSFET in a standard buck topology. The HIP6011 inte-
grates all of the control, output adjustment, monitoring and
protection functions into a single package.
The output voltage of the converter can be precisely regu-
lated to as low as 1.27V, with a maximum tolerance of
±
1.5%
over temperature and line voltage variations.
The HIP6011 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is adjust-
able from below 50kHz to over 1MHz. The error amplifier
features a 15MHz gain-bandwidth product and 6V/
μ
s slew
rate which enables high converter bandwidth for fast tran-
sient performance. The resulting PWM duty ratio ranges
from 0% to 100%.
The HIP6011 protects against over-current conditions by inhib-
iting PWM operation. The HIP6011 monitors the current by
using the r
DS(ON)
of the upper MOSFET which eliminates the
need for a current sensing resistor. Built-in over-voltage protec-
tion triggers an external SCR to crowbar the input supply.
Pinout
HIP6011
(SOIC)
TOP VIEW
Ordering Information
PART NUMBER
TEMP.
RANGE (
o
C)
PACKAGE
PKG.
NO.
HIP6011
0 to 70
14 Ld SOIC
M14.15
8
9
10
11
12
13
14
7
6
5
4
3
2
1
OCSET
SS
EN
COMP
FB
RT
VCC
NC
BOOT
UGATE
PHASE
GND
OVP
VSEN
Alpha is a trademark of Digital Equipment Corporation.
Pentium is a trademark of Intel Corporation.
Pentium Pro is a trademark of Intel Corporation.
PowerPC is a trademark of IBM.
File Number
4409
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 407-727-9207
|
Copyright
Intersil Corporation 1999