- 您現在的位置：買賣IC網 > PDF目錄385394 > HSMJ-A401-U40M1 (Avago Technologies Ltd.) SMT LED Surface Mount LED Indicator PDF資料下載
參數資料
| 型號： | HSMJ-A401-U40M1 |
| 廠商： | Avago Technologies Ltd. |
| 英文描述： | SMT LED Surface Mount LED Indicator |
| 中文描述： | 表面貼裝LED表面貼裝LED指示燈 |
| 文件頁數： | 9/9頁 |
| 文件大小： | 1197K |
| 代理商： | HSMJ-A401-U40M1 |
Forward Voltage Bin Table
For HSMZ/V/U – A4xx-xxxxx only
BIN
VA
VB
VC
VD
VE
MIN.
1.9
2.2
2.5
2.8
3.1
MAX.
2.2
2.5
2.8
3.1
3.4
Tolerance of each bin limit =
±
0.05
For product information and a complete list of distributors, please gotoour website:
www.avagotech.com
Avago AvagoTechnoogies, and the A logoare trademarks of AvagoTechnoogies Limted in the United States and other countries.
Data subject tochange. Copyright 2007 AvagoTechnoogies Limted. All rights reserved. Obsoetes AV01-0312EN
AV02-0479EN June 20, 2007
This product is qualified as Moisture Sensitive Level 2a per J EDEC J -
STD-020. Precaution when handling this moisture sensitive product is
important to ensure the reliability of the product. Refer to Avago
Application Note AN 5305
Handling of Moisture Sensitive Surface
Mount Devices
for details.
A. Storage before use
– Unopen moisture barrier bag (MBB) can be stored at <40
°
C/90% RH
for 12 months. If the actual shelf life has exceeded 12 months and the
HIC indicates that baking is not required, then it is safe to reflow the
LEDs per the original MSL rating.
– It is not recommended to open the MBB prior to assembly
(e.g., for IQC).
B. Control after opening the MBB
– The humidity indicator card (HIC) shall be read immediately upon
opening of MBB.
– The LEDs must be kept at <30
°
C/60% RH at all times and all high
temperature related processes, including soldering, curing or rework,
need to be completed within 672 hours.
C. Control of unfinished reel
– Unused LEDs need to be stored in sealed MBB with desiccant or in
desiccator at <5% RH.
D. Control of assembled boards
– If the PCB soldered with the LEDs is to be subjected to other high
temperature processes, the PCB needs to be stored in sealed MBB
with desiccant or in desiccator at <5% RH to ensure no LEDs have
exceeded their floor life of 672 hours.
E. Baking is required if:
– “10%” or “15%” HIC indicator turns pink.
– The LEDs are exposed to conditions of >30
°
C/60% RH at any time.
– The LEDs' floor life exceeds 672 hours.
Recommended baking conditions: 60
±
5
°
C for 20 hours.
相關PDF資料 |
PDF描述 |
|---|---|
| HSMK-A400-T80M2 | SMT LED Surface Mount LED Indicator |
| HSMK-A401-R40M2 | SMT LED Surface Mount LED Indicator |
| HSML-A401-U40M1 | SMT LED Surface Mount LED Indicator |
| HSMM-A400-T8YM2 | SMT LED Surface Mount LED Indicator |
| HSMM-A401-R7YM2 | SMT LED Surface Mount LED Indicator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HSMJ-A430-W50M1 | 功能描述:標準LED-SMD AlInGaP Red Orange AlInGaP Rorg RoHS:否 制造商:Vishay Semiconductors 封裝 / 箱體:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明顏色:Red 波長/色溫:631 nm 透鏡顏色/類型:Water Clear 正向電流:30 mA 正向電壓:2 V 光強度:54 mcd 顯示角:130 deg 系列:VLMx1500 封裝:Reel |
| HSMJ-A431-X90M1 | 功能描述:標準LED-SMD AlInGaP Red Orange AlInGaP Rorg RoHS:否 制造商:Vishay Semiconductors 封裝 / 箱體:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明顏色:Red 波長/色溫:631 nm 透鏡顏色/類型:Water Clear 正向電流:30 mA 正向電壓:2 V 光強度:54 mcd 顯示角:130 deg 系列:VLMx1500 封裝:Reel |
| HSMJ-A461-W40M1 | 功能描述:標準LED-SMD Orange AllnGaP 2850mcd 621nm RoHS:否 制造商:Vishay Semiconductors 封裝 / 箱體:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明顏色:Red 波長/色溫:631 nm 透鏡顏色/類型:Water Clear 正向電流:30 mA 正向電壓:2 V 光強度:54 mcd 顯示角:130 deg 系列:VLMx1500 封裝:Reel |
| HSMJ-T425 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Surface Mount High Performance AlInGaP LED Indicators |
| HSMJ-T525 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Surface Mount High Performance AlInGaP LED Indicators |
發布緊急采購，3分鐘左右您將得到回復。