- 您現在的位置：買賣IC網 > PDF目錄30745 > LM2457TA (NATIONAL SEMICONDUCTOR CORP) 3 CHANNEL, VIDEO AMPLIFIER, PZFM15 PDF資料下載
參數資料
| 型號： | LM2457TA |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 音頻／視頻放大 |
| 英文描述： | 3 CHANNEL, VIDEO AMPLIFIER, PZFM15 |
| 封裝： | TO-220, 15 PIN |
| 文件頁數： | 1/14頁 |
| 文件大小： | 823K |
| 代理商： | LM2457TA |
LM2457
Monolithic Triple 7.5nS CRT Driver With Integrated
Clamp and G1 Blanking
General Description
The LM2457 driver is an integrated high voltage triple CRT
driver circuit designed for use in color monitor applications.
The input signal interface to the IC is a multiplexed signal
containing both clamp and video signal information, relative
to an external 1.7 VDC reference.
The IC contains three high gain, differential input, high input
impedance, wide band amplifiers which directly drive the
RGB cathodes of a CRT. Each channel has its gain internally
set to -52 and can drive CRT capacitive loads as well as
resistive loads present in other applications, limited only by
the package’s power dissipation.
Integrated with the driver is a triple video clamp circuit for DC
recovery of each of the AC coupled video outputs. The DC
clamp circuit amplifies the clamp signal that is multiplexed on
the video signal input. The DC clamp amplifiers are high
gain, differential input, high input impedance amplifiers, set-
ting a low impedance DC level at the clamp output which can
be used to restore the DC level of the cathode drive. Each
channel has a gain that is internally set to +75.
Also integrated within the package is a 43V
p-p vertical blank-
ing driver that is designed to drive the vertical retrace blank-
ing signal to the G1. This is a current limited, low impedance
output capable of driving normal G1 decoupling capaci-
tances via an external resistor.
The output of the G1 driver can also be used to drive a
voltage boost capacitor (22uF). When connected between
the G1 drive output and the 120v supply input pin, a 120v
boost supply is achieved which can be used to drive the
internal DC clamp circuit, thereby eliminating the require-
ment for a 120V clamp supply.
The IC is packaged in an industry standard 15 lead TO-220
molded plastic power package.
Features
n
7.5ns low power driver
n
Three integrated active clamp circuits
n
Integrated 120V supply and G1 vertical blank drive
circuit
n
Multiplexed signal interface to LM125X OSD Pre-amp
minimizes pin count while increasing functionality
n
External System voltage reference
n
Convenient TO-220 staggered lead package
Recommended Applications
n
1024 x 768 Resolution displays up to 85Hz refresh
n
Pixel clock frequencies up to 95MHz
n
Monitor requiring horizontal video blanking
Block Diagram
Package Pinout
DS101379-1
FIGURE 1. LM2457 Block Diagram
DS101379-2
FIGURE 2. LM2457 Package Pinout
Order Number LM2457TA
October 2000
LM2457
Monolithic
T
riple
7.5nS
CRT
Driver
W
ith
Integrated
Clamp
and
G1
Blanking
2000 National Semiconductor Corporation
DS101379
www.national.com
相關PDF資料 |
PDF描述 |
|---|---|
| LM2471TA/NOPB | 1 CHANNEL, VIDEO AMPLIFIER, PZFM11 |
| LM2476TB | 1 CHANNEL, VIDEO AMPLIFIER, PZFM19 |
| LM2483NA | SPECIALTY CONSUMER CIRCUIT, PDIP14 |
| LM2483NA/NOPB | SPECIALTY CONSUMER CIRCUIT, PDIP14 |
| LM25117PMHE | SWITCHING CONTROLLER, 530 kHz SWITCHING FREQ-MAX, PDSO20 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LM2459 | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Monolithic Single Channel 15 MHz DTV CRT Driver |
| LM2459C WAF | 制造商:Texas Instruments 功能描述: |
| LM2459TE | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Monolithic Single Channel 15 MHz DTV CRT Driver |
| LM246 | 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:PROGRAMMABLE QUAD BIPOLAR OPERATIONAL AMPLIFIERS |
| LM2460 | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Monolithic Triple Channel High Swing CRT Driver |
發布緊急采購，3分鐘左右您將得到回復。