- 您現在的位置：買賣IC網 > PDF目錄371043 > MC68332TS (Motorola, Inc.) 32-Bit Modular Microcontroller PDF資料下載
參數資料
| 型號： | MC68332TS |
| 廠商： | Motorola, Inc. |
| 英文描述： | 32-Bit Modular Microcontroller |
| 中文描述： | 32位微控制器模塊 |
| 文件頁數： | 55/88頁 |
| 文件大小： | 446K |
| 代理商： | MC68332TS |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁當前第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁
MC68332
MC68332TS/D
MOTOROLA
55
lation parameter. From 1 to 255 period measurements can be made and summed with the previous
measurement(s) before the TPU interrupts the CPU, allowing instantaneous or average frequency mea-
surement, and the latest complete accumulation (over the programmed number of periods).
The pulse width (high-time portion) of an input signal can be measured (up to 24 bits) and added to a
previous measurement over a programmable number of periods (1 to 255). This provides an instanta-
neous or average pulse-width measurement capability, allowing the latest complete accumulation (over
the specified number of periods) to always be available in a parameter. By using the output compare
function in conjunction with PPWA, an output signal can be generated that is proportional to a specified
input signal. The ratio of the input and output frequency is programmable. One or more output signals
with different frequencies, yet proportional and synchronized to a single input signal, can be generated
on separate channels.
5.1.11 Quadrature Decode (QDEC)
The quadrature decode function uses two channels to decode a pair of out-of-phase signals in order to
present the CPU with directional information and a position value. It is particularly suitable for use with
slotted encoders employed in motor control. The function derives full resolution from the encoder sig-
nals and provides a 16-bit position counter with rollover/under indication via an interrupt.
The counter in parameter RAM is updated when a valid transition is detected on either one of the two
inputs. The counter is incremented or decremented depending on the lead/lag relationship of the two
signals at the time of servicing the transition. The user can read or write the counter at any time. The
counter is free running, overflowing to $0000 or underflowing to $FFFF depending on direction. The
QDEC function also provides a time stamp referenced to TCR1 for every valid signal edge and the abil-
ity for the host CPU to obtain the latest TCR1 value. This feature allows position interpolation by the
host CPU between counts at very slow count rates.
5.2 MC68332G Time Functions
The following paragraphs describe factory-programmed time functions implemented in the motion-con-
trol microcode ROM. A complete description of the functions is beyond the scope of this summary. Re-
fer to Using the TPU Function Library and TPU Emulation Mode(TPUPN00/D) for more information
about specific functions.
5.2.1 Table Stepper Motor (TSM)
The TSM function provides for acceleration and deceleration control of a stepper motor with a program-
mable number of step rates up to 58. TSM uses a table in PRAM, rather than an algorithm, to define
the stepper motor acceleration profile, allowing the user to fully define the profile. In addition, a slew rate
parameter allows fine control of the terminal running speed of the motor independent of the acceleration
table. The CPU need only write a desired position, and the TPU accelerates, slews, and decelerates
the motor to the required position. Full and half step support is provided for two-phase motors. In addi-
tion, a slew rate parameter allows fine control of the terminal running speed of the motor independent
of the acceleration table.
5.2.2 New Input Capture/Transition Counter (NITC)
Any channel of the TPU can capture the value of a specified TCR or any specified location in parameter
RAM upon the occurrence of each transition or specified number of transitions, and then generate an
interrupt request to notify the bus master. The times of the most recent two transitions are maintained
in parameter RAM. A channel can perform input captures continually, or a channel can detect a single
transition or specified number of transitions, ceasing channel activity until reinitialization. After each
transition or specified number of transitions, the channel can generate a link to other channels.
相關PDF資料 |
PDF描述 |
|---|---|
| MC68332GCFC16 | 32-Bit Modular Microcontroller |
| MC68332GCFC20 | 32-Bit Modular Microcontroller |
| MC68332GCFV20 | 32-Bit Modular Microcontroller |
| MC68332GCFVV16 | 32-Bit Modular Microcontroller |
| MC68332GMFC16 | 32-Bit Modular Microcontroller |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MC68332VFC16 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:32-Bit Modular Microcontroller |
| MC68332VFC20 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:32-Bit Modular Microcontroller |
| MC68332VFV16 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:32-Bit Modular Microcontroller |
| MC68332VFV20 | 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:32-Bit Modular Microcontroller |
| MC68334 | 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Technical Supplement |
發布緊急采購，3分鐘左右您將得到回復。