- 您現在的位置：買賣IC網 > PDF目錄382378 > PCA8515 (NXP Semiconductors N.V.) Stand-alone OSD PDF資料下載
參數資料
| 型號： | PCA8515 |
| 廠商： | NXP Semiconductors N.V. |
| 英文描述： | Stand-alone OSD |
| 中文描述： | 單機OSD |
| 文件頁數： | 47/64頁 |
| 文件大小： | 405K |
| 代理商： | PCA8515 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁當前第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁
1995 Jan 19
47
Philips Semiconductors
Preliminary specification
Stand-alone OSD
PCA8515
12 OSD CLOCK SELECTION FOR DIFFERENT TV
STANDARDS
12.1
OSD frequency
The PCA8515 supports three different TV scanning
standards. To obtain the best quality character display,
each TV standard requires a different OSD frequency. To
cater for this requirement the PCA8515 provides a
programmable OSD clock that generates frequencies in
the range 4 to 10 MHz. The two examples given below
illustrate the OSD clock requirements for different TV
scanning standards.
12.1.1
NTSC 525LPF/60 Hz and PAL 625LPF/50 Hz
The OSD clock is applied directly to the OSD circuitry and
can take any value within the 4 to 10 MHz range. The
NTSC 525LPF/60 Hz standard when used with a 19 inch
screen and an OSD clock of 8 MHz produces a character
dot width of 13.2 mm.
12.1.2
PAL 1250LPF/100 Hz
With this standard, in order to obtain the same character
dot width as in the NTSC 525LPF/50 Hz example given
above; the OSD clock must be doubled.
HSYNC is applied directly to the OSD circuitry without
being divided by two as both the horizontal frequency
(1250 Hz) and the vertical frequency (100 Hz) are
doubled.
12.2
Maximum number of characters per row
The number of characters per row is a function of the OSD
clock frequency and the TV standard used.
With reference to Fig.40 the active video signal period of a
horizontal line is 53.5
μ
s. However, in order to reduce
jittering at the screen edge, overscan is normally applied
by the TV manufacturer and this reduces the visible video
signal period to 48.15
μ
s. The examples given below show
how the number of characters per row and the character
width may be obtained for the NTSC 525LPF/60 Hz
TV standard using different OSD clock frequencies.
12.2.1
NTSC 525LPF/60 Hz; f
OSD
= 6 MHz
As f
OSD
= 6 MHz; T
OSD
= 0.1666
μ
s
The number of visible dots on one horizontal line is 290
(48.15
μ
s/0.1666
μ
s). However, as the starting position
of the first character dot is approximately 45 dots after
HSYNC, the actual visible number of dots per line is 245.
Each character is composed of a 12
×
18 dot matrix;
therefore the maximum number of charcters on one line
is 20 (245/12).
If a 19 inch TV screen is used, the width of a horizontal
line is approximately 370 mm and this gives a character
width of 18.5 mm.
12.2.2
NTSC 525LPF/60 Hz; f
OSD
= 10 MHz
As f
OSD
= 10 MHz; T
OSD
= 0.1
μ
s
The number of visible dots on one horizontal line is 481
(48.15
μ
s/0.1
μ
s). Allowing for the initial starting position
of 45 dots, the actual number of visible dots per line is
436.
Each character is composed of a 12 x 18 dot matrix;
therefore the maximum number of charcters on one line
is 36.
If a 19 inch TV screen is used, the width of a horizontal
line is approximately 370 mm and this gives a character
width of 10.3 mm.
12.3
Maximum number of rows per frame
The number of rows per frame is a function of the number
of active lines per display field and the number of vertical
dots in the character matrix (which is 18). The number of
rows per frame (N) is calculated as shown below.
The three examples shown below illustrate how the
maximum number of rows per frame is obtained for each
TV scanning standard.
12.3.1
NTSC 525LPF/60 H
Z
The number of active lines per field for this standard is
between 241.5 and 249H (see Fig.41). If the value of 241
is used then the maximum number of rows per frame is 13.
12.3.2
PAL 625LPF/50 H
Z
The number of active lines per field for this standard is 280.
Therefore, the maximum number of rows per frame is 15.
12.3.3
PAL 1250LPF/100 H
Z
With this standard it is not necessary to divide HSYNC by
two as both the horizontal and vertical frequency are
doubled. The maximum number of rows per frame is 15.
N
number of act18
=
相關PDF資料 |
PDF描述 |
|---|---|
| PCA8515P | Stand-alone OSD |
| PCA8515T | Stand-alone OSD |
| PCA8516T | Stand-alone OSD |
| PCA8516 | Stand-alone OSD |
| PCA8516P | Stand-alone OSD |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCA8515P | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Stand-alone OSD |
| PCA8515T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Stand-alone OSD |
| PCA8515T/009 | 制造商:NXP Semiconductors 功能描述:ON-SCREEN DISPLAY IC, PDSO24 |
| PCA8516 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Stand-alone OSD |
| PCA85162 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
發布緊急采購，3分鐘左右您將得到回復。