- 您現在的位置：買賣IC網 > PDF目錄382378 > PCA8521FP (NXP SEMICONDUCTORS) Infrared remote control transmitter RC5 PDF資料下載
參數資料
| 型號： | PCA8521FP |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 搖控器 |
| 英文描述： | Infrared remote control transmitter RC5 |
| 中文描述： | INFRARED, TRANSMITTER IC, PDIP16 |
| 封裝： | 0.300 INCH, PLASTIC, SOT-38-4, DIP-16 |
| 文件頁數： | 18/20頁 |
| 文件大小： | 100K |
| 代理商： | PCA8521FP |
1999 Jun 15
18
Philips Semiconductors
Product specification
Infrared remote control transmitter RC5
PCA8521
Suitability of IC packages for wave, reflow and dipping soldering methods
Notes
1.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”
For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
These packages are not suitable for wave soldering as a solder joint between the printed-circuit board and heatsink
(at bottom version) can not be achieved, and as solder may stick to the heatsink (on top version).
If wave soldering is considered, then the package must be placed at a 45
°
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is only suitable for LQFP, QFP and TQFP packages with a pitch (e) equal to or larger than 0.8 mm;
it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is only suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
2.
3.
4.
5.
6.
MOUNTING
PACKAGE
SOLDERING METHOD
WAVE
REFLOW
(1)
DIPPING
suitable
suitable
Through-hole mount DBS, DIP, HDIP, SDIP, SIL
Surface mount
BGA, SQFP
HLQFP, HSQFP, HSOP, HTQFP, HTSSOP,
SMS
PLCC
(4)
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
suitable
(2)
not suitable
not suitable
(3)
suitable
suitable
not recommended
(4)(5)
not recommended
(6)
suitable
suitable
suitable
相關PDF資料 |
PDF描述 |
|---|---|
| PCA8521FT | Infrared remote control transmitter RC5 |
| PCA8565 | Real time clock/calender |
| PCA8581C | 128 x 8-bit EEPROM with I2C-bus interface |
| PCA8581CP | 128 x 8-bit EEPROM with I2C-bus interface |
| PCA8581CT | 128 x 8-bit EEPROM with I2C-bus interface |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCA8521FT | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Infrared remote control transmitter RC5 |
| PCA85232 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:LCD driver for low multiplex rates |
| PCA85232DA | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:LCD driver for low multiplex rates |
| PCA85232U | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:LCD driver for low multiplex rates |
| PCA85232U/2DA/Q1,0 | 功能描述:LCD 驅動器 LCD DRIVER FOR LOW MULTIPLEX RATES RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。