- 您現在的位置：買賣IC網 > PDF目錄382379 > PCD3330-1 (NXP Semiconductors N.V.) Multistandard repertory dialler/ringer with EEPROM PDF資料下載
參數資料
| 型號： | PCD3330-1 |
| 廠商： | NXP Semiconductors N.V. |
| 英文描述： | Multistandard repertory dialler/ringer with EEPROM |
| 中文描述： | 多標準匯編撥號器/帶有EEPROM鈴聲 |
| 文件頁數： | 17/32頁 |
| 文件大小： | 152K |
| 代理商： | PCD3330-1 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁當前第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁
1997 Jan 15
17
Philips Semiconductors
Product specification
Multistandard repertory dialler/ringer with
EEPROM
PCD3330-1
Fig.9 Timing diagram in DTMF mode, showing MUTE outputs.
handbook, full pagewidth
MGG579
2
3
ton
toff
ton
toff
handset lifted
handset replaced
CE
KEYBOARD
ENTRY
TONE
M1
M1
M2
M2
5.5.4
DTMF
DIALLING IN PULSE DIALLING MODE
(
MIXED
MODE DIALLING
)
If the controller is set to the pulse dial mode (pin PD/DTMF
is LOW), activation of keys TONE,
or # changes the
dialling mode to DTMF.
Its entry is stored in the redial register and it generates
automatically an access pause, after which the following
digits are transmitted in the DTMF mode.
The digits entered after keys TONE,
or # are not
transmitted in the redial mode. The TONE key is never
transmitted in the redial mode.
The TONE key is never transmitted, whether
or # are
transmitted depends on the selected option.
A second touch of the TONE key is ignored. The
or #
keys pressed after a switch over to DTMF dialling are all
transmitted.
If the controller is initially set to the DTMF mode (pin
PD/DTMF is HIGH), activation of TONE is ignored and the
or # are stored in the redial register and transmitted in
DTMF mode.
5.5.5
F
LASH OR
E
ARTH FUNCTION
Whether the Flash or Earth function is activated by the
FLASH key is programmed in the EEPROM.
If the FLASH function is selected a calibrated FLASH pulse
(recall register) is generated on the DP/FL output and the
MUTE output is active.
The calibrated FLASH time is programmed for 100, 115,
270 or 600 ms in EEPROM.
If the EARTH (‘Connect a/b to earth’) function is selected,
the EARTH output becomes HIGH and the MUTE output
is active. The time of earth connection is 400 ms.
When the FLASH key is pressed the telephone number
entered before the FLASH key is stored in the redial
register (EEPROM).
After dialling 1 - 2 - 3 - ’FLASH’ - on-hook Redial is
1 - 2 - 3
After dialling 1 - 2 - 3 - ‘FLASH’ - 4 - 5 - 6 - on-hook
Redial is 4 - 5 - 6.
5.5.6
D
ISCONNECT FUNCTION
This DIS (disconnect) key is only available if the function
key option is programmed. Touching the DIS key activates
output DP/FL for 800 ms. In this case the telephone set
turns to the ON-HOOK state for this calibrated time, after
which it comes back to the OFF-HOOK mode.
相關PDF資料 |
PDF描述 |
|---|---|
| PCD3330-1P | Multistandard repertory dialler/ringer with EEPROM |
| PCD3330-1T | Multistandard repertory dialler/ringer with EEPROM |
| PCD3354AH | 8-bit microcontrollers with DTMF generator and 256 bytes EEPROM |
| PCA3354CH | 8-bit microcontrollers with DTMF generator and 256 bytes EEPROM |
| PCD3354A | 8-bit microcontrollers with DTMF generator and 256 bytes EEPROM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCD3330-1D-T | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Tone/Pulse Telephone Dialer |
| PCD3330-1P | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard repertory dialler/ringer with EEPROM |
| PCD3330-1T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Multistandard repertory dialler/ringer with EEPROM |
| PCD3331-1P | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
| PCD3331-1T | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Telecommunication IC |
發布緊急采購，3分鐘左右您將得到回復。