- 您現在的位置：買賣IC網 > PDF目錄382383 > PCM1717 Stereo Audio DIGITAL-TO-ANALOG CONVERTER PDF資料下載
參數資料
| 型號： | PCM1717 |
| 英文描述： | Stereo Audio DIGITAL-TO-ANALOG CONVERTER |
| 中文描述： | 立體聲音頻數字模擬轉換器 |
| 文件頁數： | 13/14頁 |
| 文件大小： | 126K |
| 代理商： | PCM1717 |
13
PCM1717
FIGURE 16. 3rd-Order LPF.
1.0
0.5
0
–0.5
–1.0
d
20
Frequency (Hz)
100
1k
10k
24k
INTERNAL ANALOG FILTER FREQUENCY RESPONSE
(20Hz~24kHz, Expanded Scale)
FIGURE 14. Low Pass Filter Frequency Response.
10
5
0
–5
–10
–15
–20
–25
–30
–35
–40
–45
–50
–55
–60
10
100
1k
10k
100k
1M
10M
Frequency (Hz)
d
INTERNAL ANALOG FILTER FREQUENCY RESPONSE
(10Hz~10MHz)
FIGURE 15. Low Pass Filter Frequency Response.
APPLICATION
CONSIDERATIONS
DELAY TIME
There is a finite delay time in delta-sigma converters. In A/D
converters, this is commonly referred to as latency. For a
delta-sigma D/A converter, delay time is determined by the
order number of the FIR filter stage, and the chosen sampling
rate. The following equation expresses the delay time of
PCM1717:
T
D
= 11.125
x
1/f
S
For f
S
= 44.1kHz, T
D
= 11.125/44.1kHz = 251.4
μ
s
Applications using data from a disc or tape source, such as
CD audio, CD-Interactive, Video CD, DAT, Minidisc, etc.,
generally are not affected by delay time. For some profes-
sional applications such as broadcast audio for studios, it is
important for total delay time to be less than 2ms.
INTERNAL RESET
When power is first applied to PCM1717, an automatic reset
function occurs after 1,024 cycles of XTI clock. Refer to
Table I for default conditions. During the first 1,024 cycles
of XTI clock, PCM1717 cannot be programmed (Software
Control). Data can be loaded into the control registers during
this time, and after 1,204 cycles of XTI clock, a "LOW" on
ML (pin 18) will initiate programming.
OUTPUT FILTERING
For testing purposes all dynamic tests are done on the
PCM1717 using a 20kHz low pass filter. This filter limits
the measured bandwidth for THD+N, etc. to 20kHz. Failure
to use such a filter will result in higher THD+N and lower
SNR and Dynamic Range readings than are found in the
specifications. The low pass filter removes out of band
noise. Although it is not audible, it may affect dynamic
specification numbers.
The performance of the internal low pass filter from DC to
24kHz is shown in Figure 14. The higher frequency rolloff
of the filter is shown in Figure 15. If the user’s application
has the PCM1717 driving a wideband amplifier, it is recom-
mended to use an external low pass filter. A simple 3rd-
order filter is shown in Figure 16. For some applications, a
passive RC filter or 2nd-order filter may be adequate.
10k
10k
680pF
10k
1500pF
100pF
+
V
SIN
–
90
0
–90
–180
–270
–360
100
1k
10k
100k
1M
GAIN vs FREQUENCY
Frequency (Hz)
P
6
–14
–34
–54
–74
–94
G
Gain
Phase
OPA604
相關PDF資料 |
PDF描述 |
|---|---|
| PCM1717E | Stereo Audio DIGITAL-TO-ANALOG CONVERTER |
| PCM1718 | Stereo Audio DIGITAL-TO-ANALOG CONVERTER |
| PCM1718E | Stereo Audio DIGITAL-TO-ANALOG CONVERTER |
| PCM1719 | Stereo Audio DIGITAL-TO-ANALOG CONVERTER |
| PCM1719E | Stereo Audio DIGITAL-TO-ANALOG CONVERTER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCM1717E | 功能描述:音頻數/模轉換器 IC SoundPlus Stereo DAC RoHS:否 制造商:Texas Instruments 轉換器數量: 分辨率:16 bit 接口類型:I2S, UBS 轉換速率: 信噪比:98 dB 工作電源電壓:5 V DAC 輸出端數量:2 工作溫度范圍:- 25 C to + 85 C 電源電流:23 mA 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-32 封裝:Reel |
| PCM1717E/2K | 功能描述:音頻數/模轉換器 IC SoundPlus Stereo DAC RoHS:否 制造商:Texas Instruments 轉換器數量: 分辨率:16 bit 接口類型:I2S, UBS 轉換速率: 信噪比:98 dB 工作電源電壓:5 V DAC 輸出端數量:2 工作溫度范圍:- 25 C to + 85 C 電源電流:23 mA 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-32 封裝:Reel |
| PCM1717E/2KG4 | 功能描述:音頻數/模轉換器 IC SoundPlus Stereo DAC RoHS:否 制造商:Texas Instruments 轉換器數量: 分辨率:16 bit 接口類型:I2S, UBS 轉換速率: 信噪比:98 dB 工作電源電壓:5 V DAC 輸出端數量:2 工作溫度范圍:- 25 C to + 85 C 電源電流:23 mA 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-32 封裝:Reel |
| PCM1717EG | 功能描述:音頻數/模轉換器 IC SoundPlus Stereo DAC RoHS:否 制造商:Texas Instruments 轉換器數量: 分辨率:16 bit 接口類型:I2S, UBS 轉換速率: 信噪比:98 dB 工作電源電壓:5 V DAC 輸出端數量:2 工作溫度范圍:- 25 C to + 85 C 電源電流:23 mA 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-32 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。