
2–212
RED
SLR2016
HIGH EFFICIENCY RED
SLO2016
GREEN
SLG2016
YELLOW
SLY2016
X/Y Stackable.180” 4-Character 5x7 Dot Matrix
Alphanumeric IntelligentDisplay
with Memory/Decoder/Driver
FEATURES
Very Close Multi-line Spacing, 0.4" Centers
0.180" 5x7 Dot Matrix Characters
128 Special ASCII Characters for English, Ger-
man, Italian, Swedish, Danish, and Norwegian
Languages
Wide Viewing Angle: X axis 50
° Maximum,
Y Axis
±75° Maximum
Fast Access Time, 110 ns at 25
°C
Full Size Display for Stationary Equipment
Built-in Memory
Built-in Character Generator
Built-in Multiplex and LED Drive Circuitry
Direct Access to Each Digit Independently
and Asynchronously
Clear Function that Clears Character Memory
True Blanking for Intensity Dimming Applica-
tions
End-stackable, 4-character Package
Intensity Coded for Display Uniformity
Extended Operating Temperature Range:
–40
°C to +85°C
Superior ESD Immunity
100% Burned-in and Tested
Wave Solderable
TTL Compatible over Operating Temperature
Range
DESCRIPTION
The SLR/SLO/SLG/SLY2016 is a four digit 5x7 dot matrix display mod-
ule with a built-in CMOS integrated circuit. This display is X/Y stack-
able.
The integrated circuit contains memory, a 128 ASCII ROM decoder,
multiplexing circuitry and drivers. Data entry is asynchronous. A dis-
play system can be built using any number of SLR/SLO/SLG/SLY2016
since each digit can be addressed independently and will continue to
display the character last stored until replaced by another.
System interconnection is very straightforward. Two address bits (A0,
A1) are normally connected to the like-named inputs of all displays in
the system.
Data lines are connected to all SLR/SLO/SLG/SLY2016s directly and in
parallel as is the write line (WR). The display will then behave as a
write-only memory.
The SLR/SLO/SLG/SLY2016 has several features superior to competi-
tive devices. 100% burn-in processing insures that the SLR/SLO/SLG/
SLY2016 will function in more stressful assembly and use environ-
ments. True “blanking” allows the designer to dim the display for more
exibility of display presentation. Finally the CLR clear function will
clear the ASCII character RAM.
—Continued
See Appnotes 18, 19, 22, and 23 for additional information.
0.100
(2.54)
0.197 ( 3 pl.)
(5.00)
0.400
±.015
(10.16
±.38)
0.018 (.46)
0.180
(4.57)
0.784 (19.91)
EIA Date Code
Luminous
Intensity
Code
Pin 1
Indicator
.100 (2.54)
Non-cumulative (12 pl.)
0.200
(5.08)
Part Number
XXYY
SLX2016
SIEMENS
Z
0.150
(3.81)
0.012 (.3)
±.002 (.05)
0.300
±.020
(7.62
±.51)
0.160
±.020
(4.06
±.51)
Tolerance:
±.010 (.25)
Package Dimensions in inches (mm)