- 您現在的位置：買賣IC網 > PDF目錄2110 > SSM3302ACPZ-RL (Analog Devices Inc)IC AMP AUDIO 20W STER D 40LFCSP PDF資料下載
參數資料
| 型號： | SSM3302ACPZ-RL |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 1/20頁 |
| 文件大小： | 0K |
| 描述： | IC AMP AUDIO 20W STER D 40LFCSP |
| 標準包裝： | 2,500 |
| 類型： | D 類 |
| 輸出類型： | 2 通道（立體聲） |
| 在某負載時最大輸出功率 x 通道數量： | 36.6W x 1 @ 2 歐姆; 24W x 2 @ 4 歐姆 |
| 電源電壓： | 7 V ~ 18 V |
| 特點： | 消除爆音，差分輸入，短路和熱保護，關閉 |
| 安裝類型： | 表面貼裝 |
| 供應商設備封裝： | 40-LFCSP-WQ（6x6） |
| 封裝/外殼： | 40-WFQFN 裸露焊盤，CSP |
| 包裝： | 帶卷 (TR) |
2 ×10 W Filterless Class-D
Stereo Audio Amplifier
Data Sheet
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
2012–2013 Analog Devices, Inc. All rights reserved.
FEATURES
Filterless stereo Class-D amplifier with Σ-Δ modulation
2 × 10 W into 4 load and 2 × 8 W into 8 load at 12 V supply
with <1% total harmonic distortion plus noise (THD + N)
91% efficiency at 12 V, 8 W into 8 speaker
98 dB signal-to-noise ratio (SNR)
Single-supply operation from 7 V to 18 V
Flexible gain adjustment pin from 9 dB to 24 dB
Fixed input impedance of 40 k
Mono output mode pin for 1 × 20 W output power into 2
10 A shutdown current
Short-circuit and thermal protection
Available in a 40-lead, 6 mm × 6 mm LFCSP
Pop-and-click suppression
User-selectable ultralow EMI emissions mode
Thermal warning indicator
Power-on reset
APPLICATIONS
Mobile computing
Flat panel televisions
Media docking stations
Portable electronics
Sound bars
GENERAL DESCRIPTION
The SSM3302 is a fully integrated, high efficiency, stereo Class-D
audio amplifier. The application circuit requires minimal external
components and operates from a single 7 V to 18 V supply. The
device is capable of delivering 2 × 10 W of continuous output
power into a 4 load (or 2 × 8 W into 8 ) with <1% THD + N
from a 12 V supply. In addition, while mono mode is activated,
the user can drive a load as small as 2 up to 20 W continuous
output power by stacking the stereo output terminals.
The SSM3302 features a high efficiency, low noise modulation
scheme that requires no external LC output filters. This scheme
continues to provide high efficiency even at low output power.
The SSM3302 operates with 90% efficiency at 7 W into an 8
load or with 82% efficiency at 10 W into 4 from a 12 V supply,
and it has an SNR of >98 dB.
Spread spectrum pulse density modulation (PDM) is used to
provide lower EMI radiated emissions compared with other
Class-D architectures. The SSM3302 includes an optional
modulation select pin (ultralow EMI emission mode) that
significantly reduces the radiated emissions at the Class-D
outputs, particularly above 100 MHz. The SSM3302 can pass
FCC Class-B emissions testing with an unshielded 20 inch cable
using common-mode choke-based filtering.
The fully differential input of the SSM3302 provides excellent
rejection of common-mode noise on the input. The device also
includes a highly flexible gain select pin that only requires one
series resistor to choose a gain between 9 dB and 24 dB, with no
change to the input impedance. The benefit of this is to improve
gain matching between multiple SSM3302 devices within a single
application compared with using external resistors to set gain.
The SSM3302 includes an integrated voltage regulator that
generates a 5 V rail.
The SSM3302 has a micropower shutdown mode with a typical
shutdown current of 10 A. Shutdown is enabled by applying a
logic low to the SD pin. The device also includes pop-and-click
suppression circuitry that minimizes voltage glitches at the output
during turn on and turn off, reducing audible noise during
activation and deactivation.
Other included features to simplify system level integration of
the SSM3302 are input low-pass filtering to suppress out-of-
band DAC noise interference to the pulse density modulator,
fixed input impedance to simplify component selection across
multiple platform production builds, and a thermal warning
indicator pin.
The SSM3302 is specified over the commercial temperature
range (40°C to +85°C). It has built-in thermal shutdown and
output short-circuit protection. It is available in a halide-free,
40-lead, 6 mm × 6 mm lead frame chip scale package (LFCSP).
相關PDF資料 |
PDF描述 |
|---|---|
| SSTUAF32865AHLF | IC REGIST BUFF 25BIT DDR2 160BGA |
| SSTUAF32866BHLFT | IC REGIST BUFF 25BIT DDR2 96-BGA |
| SSTUAF32866CHLF | IC REGIST BUFF 25BIT DDR2 96-BGA |
| SSTUAF32868AHLF | IC REGIST BUFF 25BIT DDR2 176BGA |
| SSTUAF32868BHLFT | IC REG BUFFER 28BIT DDR2 176BGA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SSM3310GH | 制造商:SSC 制造商全稱:Silicon Standard Corp. 功能描述:P-channel Enhancement-mode Power MOSFET |
| SSM3310GJ | 制造商:SSC 制造商全稱:Silicon Standard Corp. 功能描述:P-channel Enhancement-mode Power MOSFET |
| SSM33LPT | 制造商:CHENMKO 制造商全稱:Chenmko Enterprise Co. Ltd. 功能描述:SCHOTTKY BARRIER RECTIFIER |
| SSM33LSPT | 制造商:CHENMKO 制造商全稱:Chenmko Enterprise Co. Ltd. 功能描述:SCHOTTKY BARRIER RECTIFIER |
| SSM33PT | 制造商:CHENMKO 制造商全稱:Chenmko Enterprise Co. Ltd. 功能描述:SCHOTTKY BARRIER RECTIFIER |
發布緊急采購，3分鐘左右您將得到回復。