參數資料
| 型號： | SY88149CLKG |
| 廠商： | Micrel Inc |
| 文件頁數： | 1/10頁 |
| 文件大小： | 0K |
| 描述： | IC AMP LIMITING PECL TTL 10-MSOP |
| 標準包裝： | 100 |
| 類型： | 限幅后置放大器 |
| 應用： | 光纖學網絡 |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 10-TFSOP，10-MSOP（0.118"，3.00mm 寬） |
| 供應商設備封裝： | 10-MSOP |
| 包裝： | 管件 |
| 產品目錄頁面： | 1089 (CN2011-ZH PDF) |
| 其它名稱： | 576-3393-5 |
SY88149CL
3.3V, 1.25Gbps PECL Limiting Post
Amplifier w/High Gain TTL Signal Detect
January 2009
1
M9999-011609-C
hbwhelp@micrel.com or (408) 955-1690
General Description
The SY88149CL is a high-sensitivity limiting post
amplifier designed for use in fiber-optic receivers. These
devices connect to typical transimpedance amplifiers
(TIAs). The linear signal output from TIAs can contain
significant amounts of noise and may vary in amplitude
over time. The SY88149CL quantizes these signals and
outputs PECL level waveforms.
The SY88149CL operates from a single +3.3V power
supply, over temperatures ranging from –40
oC to +85oC.
With its wide bandwidth and high gain, signals with data
rates up to 1.25Gbps, and as small as 5mVpp, can be
amplified to drive devices with PECL inputs.
The SY88149CL generates a high-gain signal-detect
(SD) open-collector TTL output. The SD function has a
high gain input stage for increased sensitivity. A
programmable Signal Detect level set pin (SDLVL) sets
the sensitivity of the input amplitude detection. SD
asserts high if the input amplitude rises above the
threshold set by SDLVL and de-asserts low otherwise.
The enable input (EN) de-asserts the true output signal
without removing the input signal. The SD output can be
fed back to the EN input to maintain output stability
under a loss-of-signal condition. Typically, 3.4dB SD
hysteresis is provided to prevent chattering.
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
Features
∑ Single 3.3V power supply
∑ Fast SD enable/disable time
∑ 622Mbps to 1.25Gbps operation
∑ Low-noise PECL data outputs
∑ High-gain SD
∑ Chatter-free Open-Collector TTL signal detect (SD)
output with internal 4.75k pull-up resistor
∑ TTL EN input
∑ Programmable SD level set (SDLVL)
∑ Available in a tiny 10-pin MSOP package
Applications
∑ GE-PON/GPON/EPON
∑ Gigabit Ethernet
∑ 1062Mbps Fibre Channel
∑ OC-12/24 SONET/SDH
∑ High-gain line driver and line receiver
∑ Low-gain TIA interface
Markets
∑ FTTH/FTTP
∑ Datacom/Telecom
∑ Optical transceiver
相關PDF資料 |
PDF描述 |
|---|---|
| SY88149HALMG TR | IC AMP LIMITING 1.25GBPS 16QFN |
| SY88149HLMG TR | IC POST AMP BURST GEPON/GPON 16M |
| SY88149NDLMG | IC LIMITING AMP 1.25GBPS 16QFN |
| SY88289ALMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
| SY88289CLMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SY88149CLKG TR | 功能描述:限幅放大器 3.3V, 1.25 Gbps LVPECL Post Amplifier with SD (I Temp, Green/4x SD gain/1xTC/10 MSOP) RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| SY88149CLKGTR | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V, 1.25Gbps PECL Limiting Post |
| SY88149CLKG-TR | 功能描述:Limiting Postamplifier IC Optical Networks 10-MSOP 制造商:microchip technology 系列:- 包裝:剪切帶（CT） 零件狀態:停產 類型:限幅后置放大器 應用:光纖學網絡 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商器件封裝:10-MSOP 標準包裝:1 |
| SY88149HAL | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:1.25Gbps Burst-Mode Limiting Amplifier with Ultra-Fast Signal Assert Timing |
| SY88149HALMG | 功能描述:限幅放大器 1.25Gbps GPON Burst Mode Limiting Amplifier RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。