
TIL3009, TIL3010, TIL3011, TIL3012
OPTOCOUPLERS/OPTOISOLATORS
SOES027A – DECEMBER 1987 – REVISED APRIL 1998
1
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
250-V Phototriac Driver Output
Gallium-Arsenide-Diode Infrared Source
and Optically-Coupled Silicon Triac Driver
(Bilateral Switch)
UL Recognized . . . File Number E65085
High Isolation . . . 3535 V peak
Output Driver Designed for 115 Vac
Standard 6-Pin Plastic DIP
typical 115 Vac(rms) applications
Solenoid/Valve Controls
Lamp Ballasts
Interfacing Microprocessors to 115-Vac
Peripherals
Motor Controls
Incandescent Lamp Dimmers
description
Each device consists of a gallium-arsenide infrared-emitting diode optically coupled to a silicon phototriac
mounted on a 6-pin lead frame encapsulated within an electrically nonconductive plastic compound. The case
withstands soldering temperature with no deformation. Device performance characteristics remain stable when
operated in high-humidity conditions.
absolute maximum ratings at 25
°
C free-air (unless otherwise noted)
Input-to-output peak voltage, 5 s maximum duration, 60 Hz (see Note 1)
Input diode reverse voltage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input diode forward current, continuous
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output repetitive peak off-state voltage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output on-state current, total rms value (50-60 Hz, full sine wave): T
A
= 25
°
3.535 kV
. . . . . . . . . . . . . . . . . . . . . .
3 V
50 mA
250 V
100 mA
50 mA
1.2 A
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
T
A
= 70
°
Output driver nonrepetitive peak on-state current (t
w
= 10 ms, duty cycle = 10%, see Figure 7)
Continuous power dissipation at (or below) 25
°
C free-air temperature:
Infrared-emitting diode (see Note 2)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phototriac (see Note 3)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total device (see Note 4)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating junction temperature range, T
J
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
. . . . . .
100 mW
300 mW
330 mW
–40
°
C to 100
°
C
–40
°
C to 150
°
C
260
°
C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES:
1. Input-to-output peak voltage is the internal device dielectric breakdown rating.
2. Derate linearly to 100
°
C free-air temperature at the rate of 1.33 mW/
°
C.
3. Derate linearly to 100
°
C free-air temperature at the rate of 4 mW/
°
C.
4. Derate linearly to 100
°
C free-air temperature at the rate of 4.4 mW/
°
C.
Copyright
1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
2
3
6
5
4
ANODE
CATHODE
NC
MAIN TERM
TRIAC SUB
MAIN TERM
TIL30xx PACKAGE
(TOP VIEW)
NC – No internal connection
Do not connect this terminal
logic diagram
1
2
6
4