- 您現在的位置：買賣IC網 > PDF目錄98281 > TPS51206DSQT (TEXAS INSTRUMENTS INC) SWITCHING REGULATOR, PDSO10 PDF資料下載
參數資料
| 型號： | TPS51206DSQT |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 穩壓器 |
| 英文描述： | SWITCHING REGULATOR, PDSO10 |
| 封裝： | 2 X 2 MM, GREEN, PLASTIC, SON-10 |
| 文件頁數： | 4/23頁 |
| 文件大小： | 603K |
| 代理商： | TPS51206DSQT |
3
5
4
VTT
VTTSNS
PGND
TPS51206
C3
10 mF
VTT
UDG-11137
CC
RC
SLUSAH1
– MAY 2011
APPLICATION INFORMATION
VDD CAPACITOR
Add a ceramic capacitor, with a value 0.1
F (or greater) and X5R grade (or better), placed close to the VDD
terminal, to stabilize the bias supply voltage from any parasitic impedance from the power supply rail.
VLDOIN CAPACITOR
Depending on the trace impedance between the VLDOIN bulk power supply to the device, a transient increase of
source current is supplied mostly by the charge from the VLDOIN input capacitor. Use a 10-
F (or greater) and
X5R grade (or better) ceramic capacitor to supply this transient charge.
VTTREF CAPACITOR
Add a ceramic capacitor, with a value 0.22
F and X5R grade (or better), placed close to the VTTREF terminal
for stable operation.
VTT CAPACITOR
For stable operation, a 10-
F (or greater) and X5R (or better) grade ceramic capacitor(s) need to be attached
close to the VTT terminal. This capacitor is recommended to minimize any additional equivalent series resistance
(ESR) and/or equivalent series inductance (ESL) of ground trace between the PGND terminal and the VTT
capacitor(s).
VTTSNS CONNECTION
To achieve tight regulation with minimum effect of trace resistance, a remote sensing terminal, the VTTSNS pin
should be connected to the positive terminal of the VTT pin output capacitor(s) as a separate trace from the
high-current path from VTT. Consider adding a low-pass R-C filter at the VTTSNS pin in case the ESR of the
VTT output capacitor(s) is larger than 2 m
Ω. The R-C filter time constant should be approximately the same or
slightly lower than the time constant of the VTT output capacitance and ESR.
Figure 24. R-C Filter for VTTSNS
VDDQSNS CONNECTION
VDDQSNS is a reference input of the VTTREF and VTT. Trace should be routed away from noise-generating
lines.
12
Copyright
2011, Texas Instruments Incorporated
Product Folder Link(s): TPS51206
相關PDF資料 |
PDF描述 |
|---|---|
| TPS5120QDBTRQ1 | 1.5 A DUAL SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO30 |
| TPS51211DSCT | SWITCHING CONTROLLER, 314 kHz SWITCHING FREQ-MAX, PDSO10 |
| TPS51211DSCR | SWITCHING CONTROLLER, 314 kHz SWITCHING FREQ-MAX, PDSO10 |
| TPS51220ARTVR | DUAL SWITCHING CONTROLLER, 333 kHz SWITCHING FREQ-MAX, PQCC32 |
| TPS51221RTVRG4 | DUAL SWITCHING CONTROLLER, 333 kHz SWITCHING FREQ-MAX, PQCC32 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TPS51206EVM-745 | 功能描述:電源管理IC開發工具 TPS51206 EVAL MOD RoHS:否 制造商:Maxim Integrated 產品:Evaluation Kits 類型:Battery Management 工具用于評估:MAX17710GB 輸入電壓: 輸出電壓:1.8 V |
| TPS5120DBT | 功能描述:DC/DC 開關控制器 Dual Output 2Phase Synch Buck Cntrlr RoHS:否 制造商:Texas Instruments 輸入電壓:6 V to 100 V 開關頻率: 輸出電壓:1.215 V to 80 V 輸出電流:3.5 A 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:CPAK |
| TPS5120DBTG4 | 功能描述:DC/DC 開關控制器 Dual Output 2Phase Synch Buck Cntrlr RoHS:否 制造商:Texas Instruments 輸入電壓:6 V to 100 V 開關頻率: 輸出電壓:1.215 V to 80 V 輸出電流:3.5 A 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:CPAK |
| TPS5120DBTR | 功能描述:DC/DC 開關控制器 Dual Output 2-Ph Synch Buck Cntrlr RoHS:否 制造商:Texas Instruments 輸入電壓:6 V to 100 V 開關頻率: 輸出電壓:1.215 V to 80 V 輸出電流:3.5 A 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:CPAK |
| TPS5120DBTRG4 | 功能描述:DC/DC 開關控制器 Dual Output 2-Ph Synch Buck Cntrlr RoHS:否 制造商:Texas Instruments 輸入電壓:6 V to 100 V 開關頻率: 輸出電壓:1.215 V to 80 V 輸出電流:3.5 A 輸出端數量:1 最大工作溫度:+ 125 C 安裝風格: 封裝 / 箱體:CPAK |
發布緊急采購，3分鐘左右您將得到回復。