- 您現在的位置：買賣IC網 > PDF目錄364014 > WSH42FB-XPC2 (Winson Semiconductor Corp.) Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart PDF資料下載
參數資料
| 型號： | WSH42FB-XPC2 |
| 廠商： | Winson Semiconductor Corp. |
| 英文描述： | Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart |
| 中文描述： | 單線圈霍爾熱保護和自動鎖定效應集成電路，重新啟動 |
| 文件頁數： | 1/10頁 |
| 文件大小： | 163K |
| 代理商： | WSH42FB-XPC2 |
WSH42FB
Winson reserves the right to make changes to improve reliability or manufacturability.
Winson, 2005/9/23 1
S ingle Coil Hall Effec t IC with T hermal Lock
Protec tion and Auto-Restart
Features:
Operate from 2.8V to 14V supply voltage.
On-chip Hall sensor.
Internal bandgap regulator allows temperature compensated operations and a
wide operating voltage range.
Output sinking capability up to 350mA for driving large load.
Lower current change rate reduces the peak output voltages during switching.
Available in rugged low profile SIP-4L,SIP-5L and SOT-25 packages.
Built-in Frequency Generator.
Built-in protection diode for reverse power supply fault.
Prevent the fail situation during lock status or high temperature
Built-in
thermal lock protection
and
auto-restart
function.
General Desc ription:
WSH42FB is designed to integrate Hall sensor with two push-pull output drivers and
frequency generator together on the same chip, it is suitable for single coil DC
brushless motors. It includes a temperature compensated voltage regulator, a
differential amplifier, a Hysteresis controller, complementary bi-direction drivers for
sinking and driving large current load and an open-collector frequency generator
capable of sinking 10mA current load. An on-chip protection diode is implemented to
prevent reverse power fault. It also includes coil parts.
You can eliminate all the
external components for the function of FG and reverse protection diode.
And
built-in
thermal lock protection
and
auto-restart
function will automatically shutdown
power at 110
°
C to prevent the coils be damaged during high temperature and
auto-restart at 105
°
C. It can replace the function of lock protection and auto-restart at
low cost.
WSH42FB are rated for operation over temperature range from
–
20
C to 90
C and
voltage ranges from 2.8V to 14V.
相關PDF資料 |
PDF描述 |
|---|---|
| WSH520 | Low voltage Single Coil Hall Effect IC with Complementary Output Drivers |
| WSH520-XPD1 | Low voltage Single Coil Hall Effect IC with Complementary Output Drivers |
| WSH520-XPD2 | Low voltage Single Coil Hall Effect IC with Complementary Output Drivers |
| WSH610 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
| WSH610-XPAN1 | Hall Effect IC with Two-Step Lock Protection and Auto-Restart Function |
相關代理商/技術參數 |
參數描述 |
|---|---|
| WSH42FB-XPD1 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart |
| WSH42FB-XPD2 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Single Coil Hall Effect IC with Thermal Lock Protection and Auto-Restart |
| WSH49E | 制造商:WINSON 制造商全稱:WINSON 功能描述:Linear Hall Effect Sensor IC |
| WSH520 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Low voltage Single Coil Hall Effect IC with Complementary Output Drivers |
| WSH520-XPD1 | 制造商:WINSON 制造商全稱:WINSON 功能描述:Low voltage Single Coil Hall Effect IC with Complementary Output Drivers |
發布緊急采購，3分鐘左右您將得到回復。