- 您現在的位置：買賣IC網 > PDF目錄373927 > AD7992BRM-1 (ANALOG DEVICES INC) 2-Channel, 12-Bit ADC with I2C Compatible Interface in 10-Lead MSOP PDF資料下載
參數資料
| 型號： | AD7992BRM-1 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | 2-Channel, 12-Bit ADC with I2C Compatible Interface in 10-Lead MSOP |
| 中文描述： | 2-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO10 |
| 封裝： | MO-187-BA, MSOP-10 |
| 文件頁數： | 1/21頁 |
| 文件大小： | 266K |
| 代理商： | AD7992BRM-1 |
AD7992
a
Preliminary Technical Data
REV. PrH 09/03
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, PO. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
World Wide Web Site: http://www.analog.com
Fax: 781/326-8703
Analog Devices, Inc., 200
3
2-Channel, 12-Bit ADC with I
2
C Compatible
Interface in 10-Lead MSOP
PRELIMINARY TECHNICAL DATA
FUNCTIONAL BLOCK DIAGRAM
FEATURES
12-Bit ADC with Fast Conversion Time: 2
μ
s
Two Single-Ended Analog Input Channels
Specified for V
DD
of 2.7 V to 5.5 V
Low Power Consumption
Fast Throughput Rate:- 188 KSPS
Sequencer Operation
Automatic Cycle Mode
I
2
C
R
Compatible Serial Interface
I
2
C
R
Interface supports:
Standard, Fast, and High-Speed Modes
Out of Range Indicator/ALERT Function
Pin-Selectable Addressing via AS
Two Versions Allow Five I
2
C Addresses
Shutdown Mode: 1
μ
A max
10-Lead MSOP Package
GENERAL DESCRIPTION
The AD7992 is a 12-bit, high speed, low power, succes-
sive-approximation ADC. The part operates from a single
2.7 V to 5.5 V power supply and features a conversion
time of 2
μ
s. The part contains a two channel multiplexer
and track/hold amplifier which can handle input frequen-
cies in excess of TBD kHz.
The AD7992 provides a two-wire serial interface which is
compatible with I
2
C interfaces. The part comes in two
versions, AD7992-0, and AD7992-1. Each version allows
for a minimum of two different I
2
C addresses. The
AD7992-0 supports Standard and Fast I
2
C interface
Modes, while the AD7992-1 supports Standard, Fast, and
two High-Speed I
2
C Interface Modes.
The AD7992 normally remains in a power-down state
while not converting, powering up only to perform con-
versions. The conversion process can be controlled using
the
CONVST
pin, an Automatic Conversion Cycle se-
lected through software control, or a mode where conver-
sions occur across read Address operations. The AD7992
uses advanced design techniques to achieve low power
dissipation with a fast conversion time. There are no pipe-
line delays associated with the part.
The reference for the part is applied externally and can be
in the range of 1.2V to V
DD.
This allows the widest dy-
namic input range to the ADC.
On-chip registers can be programmed with high and low
limits for the conversion result, and an open drain Out of
Range Indicator output (ALERT), becomes active when
the programmed high or low limits are violated. This
output can be used as an interrupt.
PRODUCT HIGHLIGHTS
1. 2
μ
s Conversion time with low power consumption.
2. I
2
C Compatible Serial Interface with pin selectable
addresses. Two AD7992 versions allow five
AD7992 devices to be connected to the same serial bus.
3. The part features automatic shutdown while not convert-
ing to maximize power efficiency. Current consumption
is 1
μ
A max when in shutdown.
4. Reference can be driven up to the power supply.
5. Out of Range Indicator which can be software disabled/
enabled.
6. Oneshot and automatic conversion rates.
7. No Pipeline Delay
The part features a standard successive-approximation
ADC.
SMBus is a trademark and I
2
C is a registered trademark of Philips Corporation
T/H
VIN1
12-BIT SUCCESSIVE
APPROXIMATION
ADC
CONTROL
LOGIC
I/P
MUX
VIN2/REFIN
AD7992
VDD
SCL
I2C INTERFACE
DATAHIGH LIMIT
REGISTER CH1
DATALOW LIMIT
REGISTER CH1
CONVERSION
RESULT REGISTER
CONFIGURATION
REGISTER
DATALOW LIMIT
REGISTER CH0
DATAHIGH LIMIT
REGISTER CH0
CYCLE TIMER
REGISTER
ALERT STATUS
REGISTER
SDA
GND
ALERT
GND
AS
OSCILLATOR
HYSTERESIS
REGISTER CH0
HYSTERESIS
REGISTER CH1
Part Number
No. of Bits
No. of Channels
Package
AD7998
12
8
20 TSSOP
AD7994
12
4
16 TSSOP
AD7997
10
8
20 TSSOP
AD7993
10
4
16 TSSOP
Table 1. Related Products
相關PDF資料 |
PDF描述 |
|---|---|
| AD7994BRU-0 | 4-Channel, 12-/10-Bit ADCs with I2C Compatible Interface in 16-Lead TSSOP |
| AD7994BRU-1 | 4-Channel, 12-/10-Bit ADCs with I2C Compatible Interface in 16-Lead TSSOP |
| AD7993BRU-0 | 4-Channel, 12-/10-Bit ADCs with I2C Compatible Interface in 16-Lead TSSOP |
| AD7993 | 4-Channel, 12-/10-Bit ADCs with I2C Compatible Interface in 16-Lead TSSOP |
| AD7994 | 4-Channel, 12-/10-Bit ADCs with I2C Compatible Interface in 16-Lead TSSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7992BRM-1REEL | 制造商:Analog Devices 功能描述:ADC Single SAR 188ksps 12-bit Serial 10-Pin MSOP T/R |
| AD7992BRMZ-0 | 功能描述:IC ADC 12BIT 2CHAN I2C 10MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| AD7992BRMZ-0REEL | 功能描述:IC ADC 12BIT 2CHAN I2C 10MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| AD7992BRMZ-1 | 功能描述:IC ADC 12BIT 2CHAN I2C 10-MSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率（每秒）:1M 數據接口:串行，SPI? 轉換器數目:1 功率耗散（最大）:- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤（4x4） 包裝:Digi-Reel® 輸入數目和類型:8 個單端，單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6 |
| AD7992BRMZ-1-R2 | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。