欧美成人免费电影,国产欧美一区二区三区精品酒店,精品国产a毛片,色网在线免费观看

參數資料
型號: ADF4360-4BCP
廠商: ANALOG DEVICES INC
元件分類: 無繩電話/電話
英文描述: Integrated Synthesizer and VCO
中文描述: TELECOM, CELLULAR, BASEBAND CIRCUIT, QCC24
封裝: 4 X 4 MM, MO-220-VGGD-2, LFCSP-24
文件頁數: 15/20頁
文件大小: 336K
代理商: ADF4360-4BCP
PRELIMINARY TECHNICAL DATA
ADF4360-2
REV. PrA 07/03
–15–
N COUNTER LATCH
With (C2, C1) = (1,0), the N Counters Latch is programmed.
A Counter Latch
A5 - A1 program the 5-bit A counter. The divide range is 0 (00000)
to 31 (11111).
Reserved Bits
DB7 is a spare bit and has been designated as “Reserved”. It
should be programmed to “0”.
B Counter Latch
B13 - B1 program the B counter. The divide range here is 3
(00.....0011) to 8191 (11....111).
Overall Divide Range
The overall divide range is defined by ((PxB) + A), where P is the
prescaler value.
CP Gain Bit
DB21 of the N Counter Latch in the ADF4360 family is the Charge
Pump Gain bit. When this is programmed to a “1” then Current
Setting 2 is used. When programmed to a “0”, Current Setting 1 is
used. This bit can also be programmed via DB10 of the Control
Latch. The bit will always reflect the latest value written to it,
whether this is through the Control Latch or the N Counter Latch.
Divide by 2
DB22 is the divide-by-2 bit. When set to a “1”, the output divide
by 2 function is chosen. When it is set to “0”, normal operation
occurs.
Divide by 2 Select
DB23 is the divide-by-2 select bit. When this is programmed to a
“1”, the divide-by-2 output is selected as the prescaler input.
When it is set to a “0”, the fundamental is used as the prescaler
input. For Example: Using the Output Divide by Two feature, and a
PFD frequency of 200kHz the user will need a value of N = 10000 to
generate 1GHz. With the divide by two select bit high, the user may
keep N = 5000.
R Counter
R1 to R14 sets the counter divide ratio. The divide range is 1
(00.....001) to 16383 (111......111).
Anti-Backlash Pulse Width
DB16 and DB17 set the anti-backlash pulse width.
Lock Detect Precision Bit
DB18 is the Lock Detect Precision Bit and sets the number of
references cycles with less than 15ns phase error for entering
the locked state. With LDP at “1”, 5 cycles are taken and with
LDP at “0”, 3 cycles are taken.
Test Mode Bit.
DB19 is the Test Mode Bit (TMB) and should be set to zero.
With TMB = 0, the contents of the Test Mode Latch are
ignored and normal operation occurs as determined by the
contents of the Control Latch, R Counter Latch, and N
Counter Latch. Please note that Test Modes are for Factory
testing only, and should not be programmed by the user.
Band Select Clock Bits
These Bits set a divider for the band select logic clock input,
The output of the R Counter is by default the value used to
clock the band select logic, but if this value is too high
(>1MHz), a divider can be switched in to divide the R counter
output to a smaller value. See Table 4.
Reserved Bits
DB23 - DB22 are spare bits and have been designated as
“Reserved”. They should be programmed to “0”.
R COUNTER LATCH
With (C2, C1) = (0,1), the R Counter Latch is programmed.
相關PDF資料
PDF描述
ADF4360-1BCP Integrated Synthesizer and VCO
ADF4360-2 Integrated Synthesizer and VCO
ADF4360-2BCP Integrated Synthesizer and VCO
ADF4360-6BCP Integrated Synthesizer and VCO
ADF4360-7BCP Integrated Synthesizer and VCO
相關代理商/技術參數
參數描述
ADF4360-4BCPRL 制造商:Analog Devices 功能描述:PLL Frequency Synthesizer Single 24-Pin LFCSP EP T/R
ADF4360-4BCPRL7 制造商:Analog Devices 功能描述:PLL Frequency Synthesizer Single 24-Pin LFCSP EP T/R
ADF4360-4BCPZ 功能描述:IC INT SYNTH/VCO SEALED 24-LFCSP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 時鐘發生器,PLL,頻率合成器 系列:- 標準包裝:2,000 系列:- 類型:PLL 頻率合成器 PLL:是 輸入:晶體 輸出:時鐘 電路數:1 比率 - 輸入:輸出:1:1 差分 - 輸入:輸出:無/無 頻率 - 最大:1GHz 除法器/乘法器:是/無 電源電壓:4.5 V ~ 5.5 V 工作溫度:-20°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-LSSOP(0.175",4.40mm 寬) 供應商設備封裝:16-SSOP 包裝:帶卷 (TR) 其它名稱:NJW1504V-TE1-NDNJW1504V-TE1TR
ADF4360-4BCPZ 制造商:Analog Devices 功能描述:IC FREQ SYNTHESIZER & VCO 1.45GHZ LFCSP 制造商:Analog Devices 功能描述:IC, FREQ SYNTHESIZER & VCO 1.45GHZ LFCSP
ADF4360-4BCPZKL1 制造商:Analog Devices 功能描述:
主站蜘蛛池模板: 台中市| 临泽县| 兖州市| 新竹市| 崇信县| 永德县| 乌拉特前旗| 堆龙德庆县| 青田县| 抚顺市| 屯门区| 三江| 南投县| 漳平市| 固始县| 三明市| 横山县| 德阳市| 延寿县| 华宁县| 新乐市| 罗定市| 孟津县| 台湾省| 肇州县| 南充市| 稻城县| 包头市| 淄博市| 江川县| 镇坪县| 平阳县| 来凤县| 东乡县| 杭州市| 彭阳县| 垫江县| 安庆市| 石屏县| 龙泉市| 黔西县|