- 您現在的位置：買賣IC網 > PDF目錄373994 > ADL5390-EVAL (Analog Devices, Inc.) RF/IF Vector Multiplier PDF資料下載
參數資料
| 型號： | ADL5390-EVAL |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | RF/IF Vector Multiplier |
| 中文描述： | 射頻中頻向量乘法器/ |
| 文件頁數： | 19/24頁 |
| 文件大小： | 716K |
| 代理商： | ADL5390-EVAL |
ADL5390
EVALUATION BOARD
The evaluation board circuit schematic for the ADL5390 is
shown in Figure 44.
Rev. 0 | Page 19 of 24
The evaluation board is configured to be driven from a
single-ended 50 source. Although the input of the ADL5390
is differential, it may be driven single-ended with no loss of
performance.
The low-pass corner frequency of the baseband I and Q chan-
nels can be reduced by installing capacitors in the C11 and C12
positions. The low-pass corner frequency for either channel is
approximated by
pF
0.5
nF
10
kHz
45
C
dB
3
+
×
≈
external
f
On this evaluation board, the I and Q baseband circuits are
identical to each other, so the following description applies to
each. The connections and circuit configuration for the I/Q
baseband inputs are described in Table 4.
The baseband input of the ADL5390 requires a differential volt-
age drive. The evaluation board is set up to allow such a drive
by connecting the differential voltage source to QBBP and
QBBM. The common-mode voltage should be maintained at
approximately 0.5 V. For this configuration, Jumpers W1 to W4
should be removed.
The baseband input of the evaluation board may also be driven
with a single-ended voltage. In this case, a bias level is provided
to the unused input from Potentiometer R10 by installing either
W1 or W2.
Setting SW1 in Position B disables the ADL5390 output amplifier.
With SW1 set to Position A, the output amplifier is enabled. With
SW1 set to Position A, an external voltage signal, such as a pulse,
can be applied to the DSOP SMA connector to exercise the
output amplifier enable/disable function.
相關PDF資料 |
PDF描述 |
|---|---|
| ADL5390ACPZ-REEL71 | RF/IF Vector Multiplier |
| ADL5390ACPZ-WP1 | RF/IF Vector Multiplier |
| ADL5390 | RF/IF Vector Multiplier |
| ADL5391 | DC to 2.0 GHz Multiplier |
| ADL5391ACPZ-R2 | DC to 2.0 GHz Multiplier |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADL5390-EVALZ | 制造商:Analog Devices 功能描述:Evaluation Board For ADL5390 制造商:Analog Devices 功能描述:EVALUATION BOARDS - Bulk |
| ADL5391 | 制造商:AD 制造商全稱:Analog Devices 功能描述:DC to 2.0 GHz Multiplier |
| ADL5391ACPZ | 制造商:Analog Devices 功能描述:IC, MULTIPLIER, 2.0GHZ, 16LFCSP 制造商:Analog Devices 功能描述:IC, MULTIPLIER, 2.0GHZ, 16LFCSP; IC Function:Analogue Multiplier; Brief Features:3 dB bandwidth of 2 GHz; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Operating Temperature Min:-40C; Operating Temperature Max:85C; Digital IC ;RoHS Compliant: Yes |
| ADL5391ACPZ-R2 | 制造商:Analog Devices 功能描述:DC TO 2.0 GHZ MULTIPLIER - Tape and Reel |
| ADL5391ACPZ-R7 | 功能描述:IC MULTIPLIER 2.0GHZ 16LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 其它 IC 和模塊 系列:- 標準包裝:100 系列:* |
發布緊急采購，3分鐘左右您將得到回復。