- 您現在的位置：買賣IC網 > PDF目錄374016 > ADN2819ACPZ-CML1 (Analog Devices, Inc.) Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp PDF資料下載
參數資料
| 型號： | ADN2819ACPZ-CML1 |
| 廠商： | Analog Devices, Inc. |
| 元件分類： | 運動控制電子 |
| 英文描述： | Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
| 中文描述： | 多速率為2.7 Gb / s的集成時鐘和數據恢復芯片限幅放大器 |
| 文件頁數： | 16/24頁 |
| 文件大小： | 570K |
| 代理商： | ADN2819ACPZ-CML1 |
ADN2819
Rev. B | Page 16 of 24
50
50
QUANTIZER
+
ADN2819
VREF
NIN
PIN
50
50
VCC
TDINP/N
LOOPEN
BYPASS
CDR
RETIMED
DATA
CLK
0
1
1
0
DATAOUTP/N
CLKOUTP/N SQUELCH
FROM
QUANTIZER
OUTPUT
0
Figure 21. Test Modes
SQUELCH MODE
When the squelch input is driven to a TTL high state, the clock
and data outputs are set to the zero state to suppress down-
stream processing. If desired, this pin can be directly driven by
the LOS (loss of signal) detector output (SDOUT). If the
squelch function is not required, the pin should be tied to VEE.
TEST MODES: BYPASS AND LOOPBACK
When the bypass input is driven to a TTL high state, the
quantizer output is connected directly to the buffers driving the
data out pins, thus bypassing the clock recovery circuit (see
Figure 21). This feature can help the system deal with
nonstandard bit rates.
The loopback mode can be invoked by driving the LOOPEN
pin to a TTL high state, which facilitates system diagnostic
testing. This connects the test inputs (TDINP/N) to the clock
and data recovery circuit (per Figure 21). The test inputs have
internal 50 terminations, and can be left floating when not in
use. TDINP/N are CML inputs and can only be dc-coupled
when being driven by CML outputs. The TDINP/N inputs must
be ac-coupled if driven by anything other than CML outputs.
Bypass and loopback modes are mutually exclusive: only one of
these modes can be used at any given time. The ADN2819 is put
into an indeterminate state if both the BYPASS and LOOPEN
pins are set to Logic 1 at the same time.
相關PDF資料 |
PDF描述 |
|---|---|
| ADN2830ACP32-REEL | Circular Connector; No. of Contacts:4; Series:LJT06R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:21; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:21-75 |
| ADN2830ACP32-REEL7 | Circular Connector; No. of Contacts:4; Series:LJT06R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:21; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:21-75 |
| ADN2830 | Continuous Wave Laser Average Power Controller |
| ADN2830ACP32 | Continuous Wave Laser Average Power Controller |
| ADN2841 | Circular Connector; No. of Contacts:14; Series:LJT06R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:23; Circular Contact Gender:Pin; Circular Shell Style:Straight Plug; Insert Arrangement:23-14 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADN2819ACPZ-CML-RL | 功能描述:IC CLOCK/DATA RECOVERY 48LFCSP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:28 系列:- 類型:時鐘/頻率發生器 PLL:是 主要目的:Intel CPU 服務器 輸入:時鐘 輸出:LVCMOS 電路數:1 比率 - 輸入:輸出:3:22 差分 - 輸入:輸出:無/是 頻率 - 最大:400MHz 電源電壓:3.135 V ~ 3.465 V 工作溫度:0°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:64-TFSOP （0.240"，6.10mm 寬） 供應商設備封裝:64-TSSOP 包裝:管件 |
| ADN2819ACPZ-CML-RL1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
| ADN2820 | 制造商:AD 制造商全稱:Analog Devices 功能描述:10.7 Gbps, 3.3V, Low Noise, TIA with Average Power Moniter |
| ADN2820ACHIPS | 制造商:Analog Devices 功能描述: |
| ADN2820S21 | 制造商:AD 制造商全稱:Analog Devices 功能描述:10.7 Gbps, 3.3V, Low Noise, TIA with Average Power Moniter |
發布緊急采購，3分鐘左右您將得到回復。