- 您現在的位置：買賣IC網 > PDF目錄374047 > ADV7344 (Analog Devices, Inc.) Multiformat Video Encoder Six 14-Bit Noise Shaped Video DACs PDF資料下載
參數資料
| 型號： | ADV7344 |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | Multiformat Video Encoder Six 14-Bit Noise Shaped Video DACs |
| 中文描述： | 多格式視頻編碼器6 14位噪聲整形視頻DAC |
| 文件頁數： | 67/88頁 |
| 文件大小： | 1078K |
| 代理商： | ADV7344 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁當前第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁
ADV7344
Power Supply Decoupling
It is recommended that each power supply pin be decoupled
with 10 nF and 0.1 μF ceramic capacitors. The V
AA
, PV
DD
,
V
DD_IO
, and both V
DD
pins should be individually decoupled to
ground. The decoupling capacitors should be placed as close as
possible to the ADV7344 with the capacitor leads kept as short
as possible to minimize lead inductance.
A 1 μF tantalum capacitor is recommended across the V
AA
supply in addition to the 10 nF and 0.1 μF ceramic capacitors.
Power Supply Sequencing
The ADV7344 is robust to all power supply sequencing
combinations. Any particular sequence can be used.
Digital Signal Interconnect
The digital signal traces should be isolated as much as possible
from the analog outputs and other analog circuitry. Digital
signal traces should not overlay the V
AA
or PV
DD
power planes.
Rev. 0 | Page 67 of 88
Due to the high clock rates used, avoid long clock traces to the
ADV7344 to minimize noise pickup.
Any pull-up termination resistors for the digital inputs should
be connected to the V
DD
power supply.
Any unused digital inputs should be tied to ground.
Analog Signal Interconnect
DAC output traces should be treated as transmission lines with
appropriate measures taken to ensure optimal performance (for
example, impedance matched traces). The DAC output traces
should be kept as short as possible. The termination resistors on
the DAC output traces should be placed as close as possible to
and on the same side of the PCB as the ADV7344.
To avoid crosstalk between the DAC outputs, it is
recommended that as much space as possible be left between
the traces connected to the DAC output pins. Adding ground
traces between the DAC output traces is also recommended.
相關PDF資料 |
PDF描述 |
|---|---|
| ADV7344BSTZ | Multiformat Video Encoder Six 14-Bit Noise Shaped Video DACs |
| ADV7390 | Low Power, Chip Scale 10-Bit SD/HD Video Encoder |
| ADV7390BCPZ | Low Power, Chip Scale 10-Bit SD/HD Video Encoder |
| ADV7390BCPZ-REEL | Low Power, Chip Scale 10-Bit SD/HD Video Encoder |
| ADV7390EBZ | Low Power, Chip Scale 10-Bit SD/HD Video Encoder |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADV7344BSTZ | 制造商:Analog Devices 功能描述: |
| ADV73505501 | 制造商:LG Corporation 功能描述:Frame Assembly |
| ADV73506801 | 制造商:LG Corporation 功能描述:Frame Assembly |
| ADV73625610 | 制造商:LG Corporation 功能描述:Frame Assembly |
| ADV73625613 | 制造商:LG Corporation 功能描述:Frame Assembly |
發布緊急采購，3分鐘左右您將得到回復。