
2-110
HIP6005B
Buck Pulse-Width Modulator (PWM)
Controller and Output Voltage Monitor
The HIP6005B provides complete control and protection for
a DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive an
N-Channel MOSFET in a standard buck topology. The
HIP6005B integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
The output voltage of the converter is easily adjusted and
precisely regulated. The HIP6005B includes a fully
TTL-compatible 5-input digital-to-analog converter (DAC)
that adjusts the output voltage from 1.3V
DC
to 2.05V
DC
in
0.05V increments and from 2.1V
DC
to 3.5V
DC
in 0.1V steps.
The precision reference and voltage-mode regulator hold the
selected output voltage to within
±
1% over temperature and
line voltage variations.
The HIP6005B provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a 200kHz
free-running triangle-wave oscillator that is adjustable from
below 50kHz to over 1MHz. The error amplifier features a
15MHz gain-bandwidth product and 6V/
μ
s slew rate which
enables high converter bandwidth for fast transient
performance. The resulting PWM duty ratio ranges from 0% to
100%.
The HIP6005B monitors the output voltage with a window
comparator that tracks the DAC output and issues a Power
Good signal when the output is within
±
10%. The HIP6005B
protects against over-current and over-voltage conditions by
inhibiting PWM operation. Additional built-in over-voltage
protection triggers an external SCR to crowbar the input
supply. The HIP6005B monitors the current by using the
r
DS(ON)
of the upper MOSFET which eliminates the need for
a current sensing resistor.
Features
Drives N-Channel MOSFET
Operates from +5V or +12V Input
Simple Single-Loop Control Design
- Voltage-Mode PWM Control
Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
Excellent Output Voltage Regulation
-
±
1% Over Line Voltage and Temperature
TTL-Compatible 5-Bit Digital-to-Analog Output Voltage
Selection
- Wide Range . . . . . . . . . . . . . . . . . . . 1.3V
DC
to 3.5V
DC
- 0.1V Binary Steps . . . . . . . . . . . . . . 2.1V
DC
to 3.5V
DC
- 0.05V Binary Steps . . . . . . . . . . . . 1.3V
DC
to 2.05V
DC
Power-Good Output Voltage Monitor
Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element,
Uses MOSFET’s r
DS(ON)
Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to over 1MHz
Applications
Power Supply for Pentium, Pentium Pro, Pentium II,
PowerPC, K6, 6X86 and Alpha Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
Pinout
HIP6005B
(SOIC, TSSOP)
TOP VIEW
6X86 is a trademark of Cyrix Corporation.
Alpha Micro is a trademark of Digital Computer Equipment Corporation
K6 is a trademark of Advanced Micro Devices.
Pentium is a registered trademark of Intel Corporation.
PowerPC is a registered trademark of IBM.
Ordering Information
PART NUMBER
TEMP.
RANGE (
o
C)
PACKAGE
PKG.
NO.
HIP6005BCB
0 to 70
20 Ld SOIC
M20.3
HIP6005BCV
0 to 70
20 Ld TSSOP
M20.173
NOTE: When ordering, use the entire part number. Add the suffix T
to obtain the TSSOP variant in tape and reel, e.g., HIP6005BCV-T.
11
12
13
14
15
16
17
18
20
19
10
9
8
7
6
5
4
3
2
1
VSEN
OCSET
SS
VID0
VID1
VID2
VID4
VID3
COMP
FB
RT
VCC
NC
NC
OVP
BOOT
UGATE
PHASE
PGOOD
GND
Data Sheet
February 1999
File Number
4568.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207
|
Copyright
Intersil Corporation 1999