參數資料
| 型號： | SY88147DLKG TR |
| 廠商： | Micrel Inc |
| 文件頁數： | 1/10頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC POST AMP PECL LIMITING 10MSOP |
| 標準包裝： | 1,000 |
| 類型： | 限幅后置放大器 |
| 應用： | 光纖學網絡 |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 10-TFSOP，10-MSOP（0.118"，3.00mm 寬） |
| 供應商設備封裝： | 10-MSOP |
| 包裝： | 帶卷 (TR) |
| 其它名稱： | SY88147DLKGTR SY88147DLKGTR-ND |
SY88147DL
3.3V, 1.25Gbps PECL Limiting Post
Amplifier w/High Gain TTL Loss-of-Signal
February 2007
1
M9999-021207-B
hbwhelp@micrel.com or (408) 955-1690
General Description
The SY88147DL is a high-sensitivity limiting post
amplifier designed for use in fiber-optic receivers. These
devices connect to typical transimpedance amplifiers
(TIAs). The linear signal output from TIAs can contain
significant amounts of noise and may vary in amplitude
over time. The SY88147DL quantizes these signals and
outputs PECL level waveforms.
The SY88147DL operates from a single +3.3V power
supply, over temperatures ranging from –40
oC to +85oC.
With its wide bandwidth and high gain, signals with data
rates up to 1.25Gbps, and as small as 5mVPP, can be
amplified to drive devices with PECL inputs.
The SY88147DL generates a high-gain loss-of-signal
(LOS) open-collector TTL output. The LOS function has
a high gain input stage for increased sensitivity. A
programmable Loss-of-Signal level set pin (LOSLVL) sets
the sensitivity of the input amplitude detection. LOS
asserts high if the input amplitude falls below the
threshold set by LOSLVL and de-asserts low otherwise.
The enable bar input (/EN) de-asserts the true output
signal without removing the input signal. The LOS
output can be fed back to the /EN input to maintain
output stability under a loss-of-signal condition. Typically
3.5dB LOS hysteresis is provided to prevent chattering.
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
Features
Single 3.3V power supply
DC to 1.25Gbps operation
Low-noise PECL data outputs
High-gain LOS
Chatter-free Open-Collector TTL Loss of Signal
(LOS) output with internal 4.75k pull-up resistor
TTL /EN input
Programmable LOS level set (LOSLVL)
Available in a tiny 10-pin MSOP
Applications
APON/BPON/EPON/GEPON/GPON
Gigabit Ethernet
531Mbps and 1062Mbps Fibre Channel
OC-3 and OC-12/24 SONET/SDH
High-gain line driver and line receiver
Low-gain TIA interface
Markets
FTTH
Datacom/Telecom
Optical transceiver
相關PDF資料 |
PDF描述 |
|---|---|
| SY88149CLKG | IC AMP LIMITING PECL TTL 10-MSOP |
| SY88149HALMG TR | IC AMP LIMITING 1.25GBPS 16QFN |
| SY88149HLMG TR | IC POST AMP BURST GEPON/GPON 16M |
| SY88149NDLMG | IC LIMITING AMP 1.25GBPS 16QFN |
| SY88289ALMG | IC POST AMP 3.3V 3.2GBPS 16-MLF |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SY88149CL | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V, 1.25Gbps PECL Limiting Post |
| SY88149CL_07 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V, 1.25Gbps PECL Limiting Post Amplifier w/High Gain TTL Signal Detect |
| SY88149CL_09 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:3.3V, 1.25Gbps PECL Limiting Post |
| SY88149CLKG | 功能描述:限幅放大器 3.3V, 1.25 Gbps LVPECL Post Amplifier with SD (I Temp, Green/4x SD gain/1xTC/10 MSOP) RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
| SY88149CLKG TR | 功能描述:限幅放大器 3.3V, 1.25 Gbps LVPECL Post Amplifier with SD (I Temp, Green/4x SD gain/1xTC/10 MSOP) RoHS:否 制造商:Micrel 輸入電壓范圍（最大值）:3.6 V 工作電源電壓:3.3 V 電源電流:40 mA 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:MSOP-10 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。