
SLOS635 – NOVEMBER 2009
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
AVAILABLE OPTIONS
PACKAGE
TA
24-PIN TSSOP (PWP) (1)
–40°C to 85°C
TPA6013A4PWP
(1)
The PWP package is available taped and reeled. To order a taped
and reeled part, add the suffix R to the part number
(e.g., TPA6013A4PWPR).
LEAD (PB-FREE) ORDERING INFORMATION
ORDERABLE DEVICE
STATUS (1)
ECO-STATUS (2)
TPA6013A4PWPG4
Active
Pb-Free
and Green
TPA6013A4PWPRG4
Active
(1)
The marketing status values are defined as follows:
(a) ACTIVE: This device recommended for new designs.
(b) LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
(c) NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using
this part in a new design.
(d) PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
(e) OBSOLETE: TI has discontinued production of the device.
(2)
Eco-Status Information – Additional details including specific material content can be accessed at www.ti.com/leadfree
(a) N/A: Not yet available Lead (Pb)-Free, for estimated conversion dates go to www.ti.com/leadfree.
(b) Pb-Free: TI defines "Lead (Pb)-Free" or "Pb-Free" to mean RoHS compatible, including a lead concentration that does not exceed
0.1% of total product weight, and, if designed to be soldered, suitable for use in specified lead-free soldering processes.
(c) Green: TI devices "Green" to mean Lead (Pb)-Free and in addition, uses package materials that do not contain halogens, including
bromine (Br), or antimony (Sb) above 0.1% of total product weight.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
VSS
Supply voltage, VDD, PVDD
–0.3 V to 6 V
VI
Input voltage
–0.3 V to VDD+0.3 V
Continuous total power dissipation
See Dissipation Rating Table
TA
Operating free-air temperature range
–40°C to 85°C
TJ
Operating junction temperature range
–40°C to 150°C
Tstg
Storage temperature range
–65°C to 150°C
(1)
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DISSIPATION RATING TABLE
TA ≤ 25°C
DERATING FACTOR
TA = 70°C
TA = 85°C
PACKAGE
POWER RATING
ABOVE TA = 25°C
POWER RATING
PWP
2.7 mW
21.8 mW/°C
1.7 W
1.4 W
2
Copyright 2009, Texas Instruments Incorporated