- 您現在的位置：買賣IC網 > PDF目錄373916 > AD7760BSV (ANALOG DEVICES INC) 2.5 MSPS, 20-Bit ADC PDF資料下載
參數資料
| 型號： | AD7760BSV |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | 2.5 MSPS, 20-Bit ADC |
| 中文描述： | 1-CH 20-BIT DELTA-SIGMA ADC, PARALLEL ACCESS, PQFP64 |
| 封裝： | TQFP-64 |
| 文件頁數： | 12/22頁 |
| 文件大?。?/td> | 868K |
| 代理商： | AD7760BSV |
AD7760
Preliminary Technical Data
THEORY OF OPERATION
The AD7760 employs a sigma-delta conversion technique to
convert the analog input into an equivalent digital word. The
modulator samples the input waveform and outputs an
equivalent digital word to the digital filter at a rate equal to I
CLK
.
Rev. PrN | Page 12 of 22
Due to the high over-sampling rate, which spreads the
quantization noise from 0 to
f
ICLK
, the noise energy contained in
the band of interest is reduced (Figure 13a). To further reduce
the quantization noise, a high order modulator is employed to
shape the noise spectrum; so that most of the noise energy is
shifted out of the band of interest (Figure 13b).
The digital filtering which follows the modulator removes the
large out-of-band quantization noise (Figure 13c) while also
reducing the data rate from
f
ICLK
at the input of the filter to
f
ICLK
/8
or less at the output of the filter, depending on the decimation
rate used.
Digital filtering has certain advantages over analog filtering. It
does not introduce significant noise or distortion and can be
made perfectly linear phase.
The AD7760 employs three Finite Impulse Response (FIR)
filters in series. By using different combinations of decimation
ratios and filter selection and bypassing, data can be obtained
from the AD7760 at a large range of data rates. Multi-bit data
from the modulator can be obtained at a rate of 20MHz. The
first filter receives data from the modulator at 20MHz where it
is decimated by four to output data at 5MHz. This partially
filtered data can also be output at this stage. The second filter
allows the decimation rate to be chosen from 2x to 32x or to be
Table 5. Configuration With Default Filter
ICLK
Frequency
20 MHz
Bypassed
Bypassed
20 MHz
4x
Bypassed
20 MHz
4x
Bypassed
20 MHz
4x
2x
20 MHz
4x
2x
20 MHz
4x
4x
20 MHz
4x
4x
20 MHz
4x
8x
20 MHz
4x
8x
20 MHz
4x
16x
20 MHz
4x
16x
20 MHz
4x
32x
20 MHz
4x
32x
12.288MHz
4x
8x
12.288MHz
4x
16x
12.288MHz
4x
32x
12.288MHz
4x
32x
!
"#
$%
&%
'%
Figure 13. Sigma-Delta ADC
completely bypassed. The third filter has a fixed decimation rate
of 2x and is user programmable as well as having a default
configuration. It is described in detail in the Programmable FIR
Filter Section. This filter can also be bypassed. Table X below
shows some characteristics of the default filter. The group delay
of the filter is defined to be the delay to the centre of the
impulse response and is equal to the computation + filter delays.
The delay until valid data is available (the DVALID status bit is
set) is equal to 2x the filter delay + the computation delay.
Filter 1
Filter 2
Filter 3
Data State
Computation
Delay
0
0.325
1.075
1.35
1.625
1.725
1.775
2.6
2.25
4.175
3.1
7.325
4.65
3.66
5.05
11.92
7.57
Filter Delay
Passband
Bandwidth
(10 MHz)
1.35 MHz
1 MHz
562.5 kHz
500 kHz
281.25 kHz
250 kHz
140.625 kHz
125 kHz
70.3125 kHz
62.5 kHz
35.156 kHz
31.25 kHz
76.8 kHz
38.4 kHz
21.6 kHz
19.2 kHz
Output Data
Rate (ODR)
20 MHz
5 MHz
2.5 MHz
2.5 MHz
1.25 MHz
1.25 MHz
625 kHz
625 kHz
312.5 kHz
312.5 kHz
156.25 kHz
156.25 kHz
78.125 kHz
192 kHz
96 kHz
96 kHz
48 kHz
Bypassed
Bypassed
2x
Bypassed
2x
Bypassed
2x
Bypassed
2x
Bypassed
2x
Bypassed
2x
2x
2x
Bypassed
2x
Unfiltered
Partially Filtered
Fully Filtered
Partially Filtered
Fully Filtered
Partially Filtered
Fully Filtered
Partially Filtered
Fully Filtered
Partially Filtered
Fully Filtered
Partially Filtered
Fully Filtered
Fully Filtered
Fully Filtered
Partially Filtered
Fully Filtered
0
1.2μS
10.8μS
3.6μS
22.8μS
6μS
44.4μS
10.8μS
87.6μS
20.4μS
174μS
39.6μS
346.8μS
142.6μS
283.2μS
64.45μS
564.5μS
相關PDF資料 |
PDF描述 |
|---|---|
| AD7769 | LC2MOS Analog I/O Port |
| AD7769AN | LC2MOS Analog I/O Port |
| AD7769AP | LC2MOS Analog I/O Port |
| AD7769JN | LC2MOS Analog I/O Port |
| AD7769JP | LC2MOS Analog I/O Port |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7760BSVZ | 功能描述:IC ADC 24BIT 2.5MSPS 64TQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| AD7760BSVZ-REEL | 功能描述:IC ADC 24BIT 2.5MSPS 64TQFP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:- 位數:14 采樣率（每秒）:83k 數據接口:串行，并聯 轉換器數目:1 功率耗散（最大）:95mW 電壓電源:雙 ± 工作溫度:0°C ~ 70°C 安裝類型:通孔 封裝/外殼:28-DIP（0.600"，15.24mm） 供應商設備封裝:28-PDIP 包裝:管件 輸入數目和類型:1 個單端，雙極 |
| AD7761BSTZ | 功能描述:16 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 64-LQFP (10x10) 制造商:analog devices inc. 系列:- 包裝:托盤 零件狀態:有效 位數:16 采樣率（每秒）:256k 輸入數:8 輸入類型:差分 數據接口:SPI 配置:ADC 無線電 - S/H:ADC:- A/D 轉換器數:8 架構:三角積分 參考類型:外部 電壓 - 電源，模擬:2 V ~ 5.5 V 電壓 - 電源，數字:- 特性:同步采樣 工作溫度:-40°C ~ 105°C 封裝/外殼:64-LQFP 供應商器件封裝:64-LQFP（10x10） 標準包裝:1 |
| AD7761BSTZ-RL | 功能描述:16 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 64-LQFP (10x10) 制造商:analog devices inc. 系列:- 包裝:帶卷（TR） 零件狀態:有效 位數:16 采樣率（每秒）:256k 輸入數:8 輸入類型:差分 數據接口:SPI 配置:ADC 無線電 - S/H:ADC:- A/D 轉換器數:8 架構:三角積分 參考類型:外部 電壓 - 電源，模擬:2 V ~ 5.5 V 電壓 - 電源，數字:- 特性:同步采樣 工作溫度:-40°C ~ 105°C 封裝/外殼:64-LQFP 供應商器件封裝:64-LQFP（10x10） 標準包裝:1,500 |
| AD7762 | 制造商:AD 制造商全稱:Analog Devices 功能描述:24-Bit, 8.5 mW, 109 dB, 128/64/32 kSPS ADCs |
發布緊急采購，3分鐘左右您將得到回復。