- 您現在的位置：買賣IC網 > PDF目錄374016 > ADN2819ACPZ-CML-RL1 (Analog Devices, Inc.) Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp PDF資料下載
參數資料
| 型號： | ADN2819ACPZ-CML-RL1 |
| 廠商： | Analog Devices, Inc. |
| 元件分類： | 運動控制電子 |
| 英文描述： | Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
| 中文描述： | 多速率為2.7 Gb / s的集成時鐘和數據恢復芯片限幅放大器 |
| 文件頁數： | 15/24頁 |
| 文件大小： | 570K |
| 代理商： | ADN2819ACPZ-CML-RL1 |
ADN2819
Rev. B | Page 15 of 24
100k
100k
BUFFER
ADN2819
VCC/2
REFCLKN
REFCLKP
CRYSTAL
OSCILLATOR
XO1
XO2
REFSEL
NC
19.44MHz
VCC
0
Figure 19. Crystal Oscillator Configuration
The ADN2819 can accept any of the following reference clock
frequencies: 19.44 MHz, 38.88 MHz, and 77.76 MHz at LVTTL/
LVCMOS/LVPECL/LVDS levels, or 155.52 MHz at LVPECL/
LVDS levels via the REFCLKN/P inputs, independent of data
rate (including Gigabit Ethernet and wrapper rates). The input
buffer accepts any differential signal with a peak-to-peak
differential amplitude of greater than 100 mV (e.g., LVPECL or
LVDS) or a standard single-ended low voltage TTL input,
providing maximum system flexibility. The appropriate division
ratio can be selected using the REFSEL0/1 pins, according to
Table 6. Phase noise and duty cycle of the reference clock are
not critical, and 100 ppm accuracy is sufficient.
Table 6. Reference Frequency Selection
Applied Reference Frequency
(MHz)
1
00
19.44
1
01
38.88
1
10
77.76
1
11
155.52
0
XX
REFCLKP/N Inactive. Use 19.44 MHz
XTAL on Pins XO1, XO2 (pull REFCLKP
to VCC)
REFSEL
REFSEL[1..0]
An on-chip oscillator to be used with an external crystal is also
provided as an alternative to using the REFCLKN/P inputs.
Details of the recommended crystal are given in Table 7.
Table 7. Required Crystal Specifications
Parameter
Mode
Frequency/Overall Stability
Frequency Accuracy
Temperature Stability
Aging
ESR
Value
Series Resonant
19.44 MHz ± 100 ppm
±100 ppm
±100 ppm
±100 ppm
50 max
REFSEL must be tied to VCC when the REFCLKN/P inputs are
active, or tied to VEE when the oscillator is used. No connection
between the XO pin and the REFCLK input is necessary (see
Figure 17, Figure 18, and Figure 19). Note that the crystal should
operate in series resonant mode, which renders it insensitive to
external parasitics. No trimming capacitors are required.
LOCK DETECTOR OPERATION
The lock detector monitors the frequency difference between
the VCO and the reference clock, and deasserts the loss of lock
signal when the VCO is within 500 ppm of center frequency.
This enables the phase loop, which then maintains phase lock,
unless the frequency error exceeds 0.1%. Should this occur, the
loss of lock signal is reasserted and control returns to the fre-
quency loop, which will reacquire and maintain a stable clock
signal at the output. The frequency loop requires a single exter-
nal capacitor between CF1 and CF2. The capacitor specification
is given in Table 8.
Table 8. Recommended C
F
Capacitor Specification
Parameter
Temperature Range
Capacitance
Leakage
Rating
Value
–40°C to +85°C
>3.0 μF
<80 nA
>6.3 V
1000
500
0
500
1000
f
ERROR
(ppm)
LOL
1
0
Figure 20. Transfer Function LOL
相關PDF資料 |
PDF描述 |
|---|---|
| ADN2819ACPZ-CML1 | Multirate to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp |
| ADN2830ACP32-REEL | Circular Connector; No. of Contacts:4; Series:LJT06R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:21; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:21-75 |
| ADN2830ACP32-REEL7 | Circular Connector; No. of Contacts:4; Series:LJT06R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:21; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:21-75 |
| ADN2830 | Continuous Wave Laser Average Power Controller |
| ADN2830ACP32 | Continuous Wave Laser Average Power Controller |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADN2820 | 制造商:AD 制造商全稱:Analog Devices 功能描述:10.7 Gbps, 3.3V, Low Noise, TIA with Average Power Moniter |
| ADN2820ACHIPS | 制造商:Analog Devices 功能描述: |
| ADN2820S21 | 制造商:AD 制造商全稱:Analog Devices 功能描述:10.7 Gbps, 3.3V, Low Noise, TIA with Average Power Moniter |
| ADN2821 | 制造商:AD 制造商全稱:Analog Devices 功能描述:11.1 Gbps 3.3V Transimpedance Amplifier |
| ADN2821ACHIPS-05K | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。