- 您現在的位置：買賣IC網 > PDF目錄385345 > GTL1655DGG (NXP Semiconductors N.V.) 16-bit LVTTL-to-GTL-GTL+ bus transceiver with live insertion PDF資料下載
參數資料
| 型號： | GTL1655DGG |
| 廠商： | NXP Semiconductors N.V. |
| 元件分類： | 電壓/頻率轉換 |
| 英文描述： | 16-bit LVTTL-to-GTL-GTL+ bus transceiver with live insertion |
| 封裝： | GTL1655DGG<SOT646-1 (TSSOP64)|<<http://www.nxp.com/packages/SOT646-1.html<1<week 3, 2006,;GTL1655DGG<SOT646-1 (TSSOP64)|<<http://www.nxp.com/packages/SOT646-1.html<1&l |
| 文件頁數： | 20/23頁 |
| 文件大小： | 127K |
| 代理商： | GTL1655DGG |
Philips Semiconductors
GTL1655
16-bit LVTTL-to-GTL/GTL+ bus transceiver with live insertion
Product data
Rev. 01 — 11 May 2004
20 of 23
9397 750 12936
Koninklijke Philips Electronics N.V. 2004. All rights reserved.
For packages with leads on two sides and a pitch (e):
–
larger than or equal to 1.27 mm, the footprint longitudinal axis is
preferred
to be
parallel to the transport direction of the printed-circuit board;
–
smaller than 1.27 mm, the footprint longitudinal axis
must
be parallel to the
transport direction of the printed-circuit board.
The footprint must incorporate solder thieves at the downstream end.
For packages with leads on four sides, the footprint must be placed at a 45
°
angle
to the transport direction of the printed-circuit board. The footprint must
incorporate solder thieves downstream and at the side corners.
During placement and before soldering, the package must be fixed with a droplet of
adhesive. The adhesive can be applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the adhesive is cured.
Typical dwell time of the leads in the wave ranges from 3 to 4 seconds at 250
°
C or
265
°
C, depending on solder material applied, SnPb or Pb-free respectively.
A mildly-activated flux will eliminate the need for removal of corrosive residues in
most applications.
13.4 Manual soldering
Fix the component by first soldering two diagonally-opposite end leads. Use a low
voltage (24 V or less) soldering iron applied to the flat part of the lead. Contact time
must be limited to 10 seconds at up to 300
°
C.
When using a dedicated tool, all other leads can be soldered in one operation within
2 to 5 seconds between 270 and 320
°
C.
13.5 Package related soldering information
[1]
For more detailed information on the BGA packages refer to the (LF)BGA Application Note
(AN01026); order a copy from your Philips Semiconductors sales office.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the
maximum temperature (with respect to time) and body size of the package, there is a risk that internal
or external package cracks may occur due to vaporization of the moisture in them (the so called
popcorn effect). For details, refer to the Drypack information in the Data Handbook IC26; Integrated
Circuit Packages; Section: Packing Methods
[2]
Table 18:
Suitability of surface mount IC packages for wave and reflow soldering
methods
Soldering method
Wave
BGA, HTSSON..T
[3]
, LBGA, LFBGA, SQFP,
SSOP..T
[3]
, TFBGA, USON, VFBGA
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP,
HSQFP, HSSON, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
PLCC
[5]
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
CWQCCN..L
[8]
, PMFP
[9]
, WQCCN..L
[8]
Package
[1]
Reflow
[2]
suitable
not suitable
not suitable
[4]
suitable
suitable
not recommended
[5][6]
not recommended
[7]
not suitable
suitable
suitable
suitable
not suitable
相關PDF資料 |
PDF描述 |
|---|---|
| GTL2000DL | 22-bit bi-directional low voltage translator |
| GTL2000DGG | 22-bit bi-directional low voltage translator |
| GTL2002D | 2-bit bidirectional low voltage translator |
| GTL2002DP | 2-bit bidirectional low voltage translator |
| GTL2002DC | 2-bit bidirectional low voltage translator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GTL1655DGG,512 | 功能描述:總線收發器 16-BIT LVTTL TO GTL RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel |
| GTL1655DGG,518 | 功能描述:總線收發器 16-BIT LVTTL TO GTL RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel |
| GTL1655DGG-T | 功能描述:總線收發器 16-BIT LVTTL TO GTL UBT (3-S) RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel |
| GTL16612 | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:18-bit GTL/GTL+ to LVTTL/TTL bidirectional universal translator (3-State) |
| GTL16612DG | 功能描述:總線收發器 18-BIT GTL/GTL + TO LVTTL/TTL RoHS:否 制造商:Fairchild Semiconductor 邏輯類型:CMOS 邏輯系列:74VCX 每芯片的通道數量:16 輸入電平:CMOS 輸出電平:CMOS 輸出類型:3-State 高電平輸出電流:- 24 mA 低電平輸出電流:24 mA 傳播延遲時間:6.2 ns 電源電壓-最大:2.7 V, 3.6 V 電源電壓-最小:1.65 V, 2.3 V 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-48 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。