- 您現在的位置：買賣IC網 > PDF目錄30743 > LM1253AAE/NA (NATIONAL SEMICONDUCTOR CORP) ON-SCREEN DISPLAY IC, PDIP28 PDF資料下載
參數資料
| 型號： | LM1253AAE/NA |
| 廠商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分類： | 畫面疊加 |
| 英文描述： | ON-SCREEN DISPLAY IC, PDIP28 |
| 封裝： | 0.600 INCH, PLASTIC, DIP-28 |
| 文件頁數： | 1/61頁 |
| 文件大小： | 1671K |
| 代理商： | LM1253AAE/NA |
當前第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁
LM1253A
Monolithic Triple 180 MHz I
2C CRT Pre-amp With
Integrated Analog On Screen Display (OSD) Generator
General Description
The LM1253A pre-amp is an integrated high voltage triple
CRT pre-amp and Analog On Screen Display (OSD) genera-
tor. The IC is I
2C controlled, and allows control of all the
parameters necessary to setup and adjust the brightness
and contrast in the CRT display. In addition, it provides a
programmable period vertical blanking pulse which is used
to blank the G1.
The LM1253A pre-amp is designed to work in cooperation
with the LM2453 driver, and provides a multiplexed video
signal (VideoPlex) interface to enable the DC clamp levels at
the cathode to be varied in order to set up the CRT bias and
to allow individual adjustment for brightness.
The Analog OSD has a selectable palette allowing a wide
selection of colors. The preset level of the OSD can be
controlled by I
2C to suit different CRT displays. The OSD
signal is internally mixed with the video signal, before the
gain section, and thus gives excellent white tracking of the
OSD with the white color point setting of the video.
The Brightness settings are also mixed into the video signal
before the gain matching controls and consequently give
excellent white color point tracking with variations in the
Brightness control. An active horizontal blanking signal is
added to the video at the output, giving excellent smear
performance, and preventing video content dependent DC
bias offsets as a result of high frequency over shoot.
The OSD horizontal sync and blanking signal is derived from
a positive going flyback pulse. The digital section provides
easy interfacing of this signal with the deflection circuits.
The vertical blanking signal is taken from the vertical sync
signal, and the blanking duration is programmable. This
system is highly integrated and requires a minimal number of
external components.
Black level clamping of the signal is carried out directly on
the AC coupled input signal into the high impedance pream-
plifier input, thus eliminating the need for additional black
level clamp capacitors.
The outputs are referenced to a DC level produced by the
LM1253A Pre-amp, and so are guaranteed to provide stable
DC operating levels within the system without the need for
additional external feedback components.
The IC is packaged in an industry standard wide body 28-
lead DIL molded plastic package.
Features
n
190 two-color ROM based Character Fonts
n
64 four-color ROM based Character Fonts
n
Supports a programmable page size with up to 512
characters and line definition codes
n
Support for 2 Display Windows (size of each window is
configurable)
n
Programmable start position for each Display Window
n
Programmable Resolutions: from 512 to 960 pixels per
line in 64 pixel increments
n
Programmable Character Height, with automatic height
control with mode change
n
Programmable Row Spacing between each display
character row
n
Maximum Pixel clock of 92.2 MHz
n
I
2C compatible interface to controlling micro-controller
n
Button boxes
n
180 MHz preamplifier with full video signal parametric
control
n
VideoPlex interface to the LM2453 driver
n
OSD mixing with 64 out of 512 color mask
programmable selection
Intended Applications
n
1280 x 1024 Displays up to 75 Hz requiring OSD
capability
October 2000
LM1253A
Monolithic
T
riple
180
MHz
I
2
C
CRT
Pre-amp
W
ith
Integrated
Analog
On
Screen
Display
(OSD)
Generator
2000 National Semiconductor Corporation
DS101265
www.national.com
相關PDF資料 |
PDF描述 |
|---|---|
| LM1267NA/NOPB | 3 CHANNEL, VIDEO PREAMPLIFIER, PDIP24 |
| LM1269NA/NOPB | 3 CHANNEL, VIDEO PREAMPLIFIER, PDIP24 |
| LM1276AAA/NA | 1 CHANNEL, VIDEO PREAMPLIFIER, PDIP28 |
| LM1279AN/NOPB | 3 CHANNEL, VIDEO AMPLIFIER, PDIP20 |
| LM1279N/NOPB | 1 CHANNEL, VIDEO AMPLIFIER, PDIP20 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LM1253AN | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Monolithic Triple 180 MHz I2C CRT Pre-amp With Integrated Analog On Screen Display (OSD) Generator |
| LM-1256 | 制造商:ROHM 制造商全稱:Rohm 功能描述:16 x 16 matrix displays |
| LM-1256_1 | 制造商:ROHM 制造商全稱:Rohm 功能描述:16】16 matrix displays |
| LM-1256LB1 | 制造商:ROHM 制造商全稱:Rohm 功能描述:16】16 matrix displays |
| LM125AN | 制造商:NSC 制造商全稱:National Semiconductor 功能描述:VOLTAGE REGULATORS |
發布緊急采購，3分鐘左右您將得到回復。