- 您現在的位置：買賣IC網 > PDF目錄382379 > PCD3316 (NXP Semiconductors N.V.) Caller-ID on Call Waiting CIDCW receiver PDF資料下載
參數資料
| 型號： | PCD3316 |
| 廠商： | NXP Semiconductors N.V. |
| 英文描述： | Caller-ID on Call Waiting CIDCW receiver |
| 中文描述： | 來電呼叫等待CIDCW編號接收機 |
| 文件頁數： | 1/30頁 |
| 文件大小： | 534K |
| 代理商： | PCD3316 |
當前第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁
PCD3316
Caller-ID on Call Waiting (CIDCW) receiver
11 March 1999
Product specification
c
c
Unetited
microcontroller can communicate with the PCD3316 device via the serial interface.
1.
General description
The PCD3316 is a low power mixed signal CMOS integrated circuit for receiving
physical layer signals like Bellcore’s ‘CPE
1
Alerting Signal (CAS)’ and the signals
the dual tone (2130 and 2750 Hz) by using a patented digital algorithm. The
PCD3316 can be used for on-hook and off-hook Caller-ID (CID), Caller-ID on Call
Waiting (CIDCW) and Caller-Name (CNAM) applications.
For timing purposes the PCD3316 can be programmed to generate an interrupt
signal to the microcontroller every second or every minute. These timings are derived
from an on-chip 32.768 kHz oscillator.
Also incorporated in the device are a Frequency Shift Keying (FSK)
receiver/demodulator and a ‘Ring or polarity change detector’. The status of the
PCD3316, the received FSK data bytes and the ringer period can be read and many
options can be selected via the I
2
C-bus serial interface. Two on-chip oscillators are
available. One 3.58 MHz oscillator for all internal functions and a low frequency
32.768 kHz oscillator for the 1 second or 1 minute timing.
In Power-down mode only the polarity comparators and the 32.768 kHz oscillator are
active. The CAS detection, the FSK receiver and the 3.58 MHz oscillator can be
enabled separately. Detection of a polarity change on the inputs POL0 or POL1, the
reception of an FSK data byte, the detection of a CAS tone or a timebase interrupt is
signalled to the microcontroller by an interrupt request signal (IRQ). The
The PCD3316 is designed for use in a microcontroller controlled system. The device
is available in a SO16 package.
A demonstration board OM5843 and an application note AN98071are available.
1.
CPE = Customer Premises Equipment.
相關PDF資料 |
PDF描述 |
|---|---|
| PCD3316T | Caller-ID on Call Waiting CIDCW receiver |
| PCD3330-1 | Multistandard repertory dialler/ringer with EEPROM |
| PCD3330-1P | Multistandard repertory dialler/ringer with EEPROM |
| PCD3330-1T | Multistandard repertory dialler/ringer with EEPROM |
| PCD3354AH | 8-bit microcontrollers with DTMF generator and 256 bytes EEPROM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PCD3316T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Caller-ID on Call Waiting CIDCW receiver |
| PCD3316TD-T | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Caller Number ID Circuit |
| PCD3320CD | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Pulse Telephone Dialer |
| PCD3321CD | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Pulse Telephone Dialer |
| PCD3322CP | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Pulse Telephone Dialer |
發布緊急采購，3分鐘左右您將得到回復。