- 您現在的位置：買賣IC網 > Datasheet目錄39 > ADM1027ARQZ-RL7 (ON Semiconductor)IC REMOTE THERMAL CTLR 24QSOP Datasheet資料下載
參數資料
| 型號： | ADM1027ARQZ-RL7 |
| 廠商： | ON Semiconductor |
| 文件頁數： | 16/56頁 |
| 文件大?。?/td> | 1822K |
| 描述： | IC REMOTE THERMAL CTLR 24QSOP |
| 產品變化通告： | MFG CHG Notification ADI to ON Semi Product Discontinuation Notice 25/Aug/2008 Product Obsolescence 30/Sept/2009 |
| 標準包裝： | 1,000 |
| 系列： | dBCool® |
| 功能： | 風扇控制，溫度監控器 |
| 傳感器類型： | 內部和外部 |
| 感應溫度： | 0°C ~ 105°C，外部傳感器 |
| 精確度： | ±1°C |
| 拓撲： | ADC，比較器，風扇速度計數器，多路復用器，寄存器庫 |
| 輸出類型： | SMBus? |
| 輸出警報： | 無 |
| 輸出風扇： | 是 |
| 電源電壓： | 3 V ~ 5.5 V |
| 工作溫度： | 0°C ~ 105°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 24-SSOP（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 24-QSOP |
| 包裝： | 帶卷 (TR) |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁當前第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁
REV. A
16
ADM1027
TEMPERATURE MEASUREMENT REGISTERS
Reg. 0x25 Remote 1 Temperature = 0x80 default
Reg. 0x26 Local Temperature = 0x80 default
Reg. 0x27 Remote 2 Temperature = 0x80 default
Reg. 0x77 Extended Resolution 2 = 0x00 default
<7:6> TDM2 = Remote 2 Temperature LSBs
<5:4> LTMP = Local Temperature LSBs
<3:2> TDM1 = Remote 1 Temperature LSBs
TEMPERATURE MEASUREMENT LIMIT REGISTERS
Associated with each temperature measurement channel are
high and low limit registers. Exceeding the programmed high or
low limit causes the appropriate status bit to be set. Exceeding
either limit can also generate SMBALERT interrupts.
Reg. 0x4E Remote 1 Temperature Low Limit = 0x81 default
Reg. 0x4F Remote 1 Temperature High Limit = 0x7F default
Reg. 0x50 Local Temperature Low Limit = 0x81 default
Reg. 0x51 Local Temperature High Limit = 0x7F default
Reg. 0x52 Remote 2 Temperature Low Limit = 0x81 default
Reg. 0x53 Remote 2 Temperature High Limit = 0x7F default
READING TEMPERATURE FROM THE ADM1027
It is important to note that temperature can be read from the
ADM1027 as an 8-bit value (with 1rC resolution), or as a 10-
bit value (with 0.25rC resolution). If only 1rC resolution is
required, the temperature readings can be read back at any time
and in no particular order.
If the 10-bit measurement is required, this involves a 2-register
read for each measurement. The extended resolution register
(Reg. 0x77) should be read first. This causes all temperature
reading registers to be frozen until all temperature reading regis-
ters have been read from. This prevents an MSB reading from
being updated while its two LSBs are being read, and vice versa.
ADDITIONAL ADC FUNCTIONS
A number of other functions are available on the ADM1027 to
offer the systems designer increased flexibility:
Turn Off Averaging
For each temperature measurement read from a value register,
16 readings have actually been made internally and the results
averaged before being placed into the value register. There may
be an instance where the user would like to take a very fast
measurement, e.g., of CPU temperature. Setting Bit 4 of Con-
figuration Register 2 (Reg. 0x73) turns averaging off. This takes
a reading every 13 ms. The measurement itself takes 4 ms.
Single-Channel ADC Conversions
Setting Bit 6 of Configuration Register 2 (Reg. 0x73) places the
ADM1027 into single-channel ADC conversion mode. In this
mode, the ADM1027 can be made to read a single temperature
channel only. If the internal ADM1027 clock is used, the selected
input will be read every 1.4 ms. The appropriate ADC channel
is selected by writing to Bits <7:5> of TACH1 minimum high
byte register (Reg. 0x55).
Bits <7:5> Reg 0x55
Channel Selected
101
Remote 1 Temp
110
Local Temp
111
Remote 2 Temp
Configuration Register 2 (Reg. 0x73)
<4> = 1 Averaging off
<6> = 1 Single-channel convert mode
TACH1 Minimum High Byte (Reg. 0x55)
<7:5> Selects ADC channel for single-channel convert mode
OVERTEMPERATURE EVENTS
Overtemperature events on any of the temperature channels can
be detected and dealt with automatically. Registers 0x6A to
0x6C are the THERM limits. When a temperature exceeds its
THERM limit, all fans will run at 100% duty cycle. The fans
will stay running at 100% until the temperature drops below
THERM 4rC.
FANS
THERM LIMIT
TEMP
100%
HYSTERESIS = 4C
Figure 15. THERM Limit Operation
Rev. 3 | Page 16 of 56 | www.onsemi.com
相關PDF資料 |
PDF描述 |
|---|---|
| ADM1029ARQZ-R7 | IC SENSOR 2TEMP/FAN CTRL 24QSOP |
| ADM1030ARQZ-RL7 | IC SNSR TEMP/FAN PWM CTRL 16QSOP |
| ADM1032ARZ-REEL | IC TEMP MONITOR 85DEG 8SOIC |
| ADM1033ARQZ-RL7 | IC THERM/FAN SPEED CTLR 16-QSOP |
| ADM1034ARQZ-REEL | IC THERM/FAN SPEED CTRLR 16-QSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADM1027ARQZ-RL71 | 制造商:ONSEMI 制造商全稱:ON Semiconductor 功能描述:dBCOOLa?￠ Remote Thermal Controller and Voltage Monitor |
| ADM1028 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Remote Thermal Diode Monitor with Linear Fan Control |
| ADM1028ARQ | 功能描述:IC SENSOR TEMP/FAN CTRL 16QSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 熱管理 系列:- 標準包裝:1 系列:- 功能:溫度監控系統（傳感器） 傳感器類型:內部和外部 感應溫度:-40°C ~ 125°C，外部傳感器 精確度:±2.5°C 本地（最大值），±5°C 遠程（最大值） 拓撲:ADC，比較器，寄存器庫 輸出類型:2 線 SMBus? 輸出警報:無 輸出風扇:無 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-8 供應商設備封裝:SOT-23-8 包裝:Digi-Reel® 其它名稱:296-22675-6 |
| ADM1028ARQ-REEL7 | 制造商:Rochester Electronics LLC 功能描述:TDM + LINEAR FAN CONTROL I.C. - Tape and Reel |
| ADM1029 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Dual PWM Fan Controller and Temperature Monitor for High Availability Systems |
發布緊急采購，3分鐘左右您將得到回復。