
JY33
1
B
8880
1
B
The FX2N-8AV-BD enables the user to set
8 analog setpoint values. The analog values
of the potentiometers are read into the
controller and used as default setpoint
values for timers, counters and data regis-
ters by the user’s PLC programs. Setpoint
value polling and the definition of the
potentiometer scales are performed in the
PLC program using the dedicated in-
structions VRRD/VRSC (FNC85/86). The
FX2N-8AV-BD adapter board is installed
in the expansion slot of the FX2N CPU.
No additional power supply is required
for operation.
Analog Setpoint Adapter FX2N-8AV-BD
¨ FX0N FX2N
Specifications
FX2N-8AV-BD
General specifications
Conforms to base units
Power supply
From base unit
Adjusting range
8 bit
Related I/O points
0
Potentiometer evaluation
Via application instruction from the PLC CPU (FNC 85/86)
Weight
kg
0.08
Dimensions (W x H)
mm
52 x 35
Order information
Art. no.
65594
MELSEC FX0N/FX2N
SPECIAL FUNCTION MODULES
Analog Modules
The analog module FX0N-3A provides the
user with 2 analog inputs and 1 analog out-
put. They serve for conversion of analog
process signals into digital values, and vice
versa.
The analog module is connected to the
base unit via a protected flat cable. The
connection is to the extension bus on
the right side of the controller.
Specifications
FX0N-3A
General specifications
Conforms to base units
Dielectric withstand voltage
500 V AC for 1 minute
Power supply
24 V DC / 90 mA (from base unit),5 V DC / 30 mA
Number of
analog points
inputs
2
outputs
1
Analog data
voltage
V DC
0 – 10 / 0 – 5
current
mA
DC 4 – 20
I/O resolution
20 mV/ 64
A(8bit)
Total accuracy
±1%
Conversion time
A
→D/D →Ams
0.1/point
Related I/O points
8
Weight
kg
0.2
Dimensions (W x H x D)
mm
43 x 90 x 87
Order information
Art. no.
41790
Analog Module FX0N-3A
FX0N FX2N
BASICS
X
FX
F
MITSUBISHI ELECTRIC
36