- 您現在的位置：買賣IC網 > PDF目錄385345 > GS9092ACNE3 (Gennum Corporation) GS9092A GenLINX-R III 270Mb/s Serializer for SDI and DVB-ASI PDF資料下載
參數資料
| 型號： | GS9092ACNE3 |
| 廠商： | Gennum Corporation |
| 英文描述： | GS9092A GenLINX-R III 270Mb/s Serializer for SDI and DVB-ASI |
| 中文描述： | GS9092A GenLINX - R的第三270Mb / s的串行SDI和DVB - ASI在內 |
| 文件頁數： | 37/59頁 |
| 文件大小： | 614K |
| 代理商： | GS9092ACNE3 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁當前第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁
GS9092A Data Sheet
34715 - 0
February 2006
37 of 59
3.7.3.1 SMPTE 352M Payload Identifier Generation and Insertion
If the 352M_INS bit of the IOPROC_DISABLE register is set LOW, the GS9092A
can generate and insert SMPTE 352M payload identifier ancillary data packets into
the data stream automatically or based on information programmed into the host
interface.
When the 352M_CALC bit of the IOPROC_DISABLE register is set HIGH, the user
must program the SMPTE 352M packet to be inserted into the VIDEO_FORMAT
registers (
Table 3-5
). In addition, the line number(s) in which the packet is to be
inserted must be programmed in the 352M_LINE_1 and 352M_LINE_2 registers
(
Table 3-6
). If both line number registers are set to zero, no packets will be
inserted.
NOTE: The user must program the SMPTE 352M packet into the
VIDEO_FORMAT registers prior to programming the line number(s) in which the
packet is to be inserted.
NOTE: It is the responsibility of the user to ensure that there is sufficient space in
the horizontal blanking interval for the insertion of the SMPTE 352M packets.
These packets will be inserted immediately after the EAV word on the line
designated in the standard or by the user
If there are other ancillary data packets present, the SMPTE 352M packet will be
inserted in the first available space in the HANC. Ancillary data must be contiguous
from the EAV. When there is insufficient space available, the 352M packets will not
be inserted.
When the 352M_CALC bit of the IOPROC_DISABLE register is set LOW, the
GS9092A will automatically generate and insert 352M packets into the video
stream. The device will also write the generated packet into the VIDEO_FORMAT
registers.
NOTE: When the IOPROC_EN pin is set HIGH and all registers contain their
default values, the VIDEO_FORMAT registers are set to 0h and do not contain the
SMPTE 352M packet.
The SMPTE 352M packet will be inserted into the data stream according to the line
number and sample position defined in the standard.
The 4:3/16:9 bit of the SMPTE 352M packet will be set LOW by default to denote
4:3. For video payloads where 16:9 images are transmitted over 270Mb/s links, the
user must program the SMPTE 352M packet accordingly.
The video payload identifier packet will be version 1 and comply with the structure
defined in SMPTE 352M-2002.
NOTE: The user should turn off SMPTE 352M packet insertion when serializing
SDTI signals.
相關PDF資料 |
PDF描述 |
|---|---|
| GS9092 | GS9092 GenLINX-R III 270Mb/s Serializer for SDI and DVB-ASI |
| GS9092-CNE3 | GS9092 GenLINX-R III 270Mb/s Serializer for SDI and DVB-ASI |
| GSC9620 | P-CHANNEL ENHANCEMENT MODE POWER MOSFET |
| GSD2004S-V-GS08 | DIODE 0.225 A, 300 V, 2 ELEMENT, SILICON, SIGNAL DIODE, TO-236AB, ROHS COMPLIANT, PLASTIC PACKAGE-3, Signal Diode |
| GSD2004S-V-GS18 | DIODE 0.225 A, 300 V, 2 ELEMENT, SILICON, SIGNAL DIODE, TO-236AB, ROHS COMPLIANT, PLASTIC PACKAGE-3, Signal Diode |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GS9092ACNTE3 | 制造商:Semtech Corporation 功能描述:270Mb/s Transmitter for SDI & ASI |
| GS9092CNE3 | 制造商:Gennum Corporation 功能描述: |
| GS9092-CNE3 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Gennum Corporation 功能描述: |
| GS90A12-P1M | 功能描述:插入式交流適配器 80W 12V 6.67A RoHS:否 制造商:Phihong 地區:Universal 安裝風格:Wall, Interchangeable Plug 輸入電壓范圍:90 VAC to 264 VAC 輸出端數量:1 輸出功率額定值:5 W 輸出電壓（通道 1）:5 V 輸出電流（通道 1）:1 A 直流輸出連接器:USB Type A 隨附/必需的交流插頭:Required 商用/醫用:Commercial 效率:Level V |
| GS90A15-P1M | 功能描述:插入式交流適配器 90W 15V 6A RoHS:否 制造商:Phihong 地區:Universal 安裝風格:Wall, Interchangeable Plug 輸入電壓范圍:90 VAC to 264 VAC 輸出端數量:1 輸出功率額定值:5 W 輸出電壓（通道 1）:5 V 輸出電流（通道 1）:1 A 直流輸出連接器:USB Type A 隨附/必需的交流插頭:Required 商用/醫用:Commercial 效率:Level V |
發布緊急采購，3分鐘左右您將得到回復。