- 您現在的位置：買賣IC網 > Datasheet目錄46 > SC403MLTRT (Semtech)IC REG DL BCK/LINEAR SYNC 32MLPQ Datasheet資料下載
參數資料
| 型號： | SC403MLTRT |
| 廠商： | Semtech |
| 文件頁數： | 29/32頁 |
| 文件大小： | 741K |
| 描述： | IC REG DL BCK/LINEAR SYNC 32MLPQ |
| 標準包裝： | 1 |
| 系列： | EcoSpeed®, SmartDrive™ |
| 拓撲： | 降壓（降壓）同步（1），線性（LDO）（1） |
| 功能： | 任何功能 |
| 輸出數： | 2 |
| 頻率 - 開關： | 1MHz |
| 電壓/電流 - 輸出 1： | 可調至 0.75V，6A |
| 電壓/電流 - 輸出 2： | 可調至 0.75V，200mA |
| 帶 LED 驅動器： | 無 |
| 帶監控器： | 無 |
| 帶序列發生器： | 是 |
| 電源電壓： | 3 V ~ 28 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 32-VFQFN 裸露焊盤 |
| 供應商設備封裝： | 32-MLPQ（5x5） |
| 包裝： | 標準包裝 |
| 其它名稱： | SC403MLDKR |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁當前第29頁第30頁第31頁第32頁
SC403
29
Applications Information (continued)
AGND Island
AGND should have its own island of copper with
no other signal traces routed on this layer that
connects the AGND pins and pad of the device
to the analog control components.
All of the components for the analog control cir-
cuitry should be located so that the connections
to AGND are done by wide copper traces or vias
down to AGND.
Connect PGND to AGND with a short trace or 0&
resistor. This connection should be as close to
the device as possible.
FB, VOUT, and Other Analog Control Signals
The connection from the V
OUT
power to the
analog control circuitry must be routed from the
output capacitors and located on a quiet layer.
The traces between VOUT and the analog control
circuitry (VOUT, and FB pins) must be short and
routed away from noise sources, such as BST, LX,
VIN, and PGND between the input capacitors,
output capacitors, and the device.
ILIM and TON nodes must be as short as possible
to ensure the best accuracy in current limit and
on time.
R
ILIM
should be close to the device and connected
to LX with a Kelvin trace to pin 28 on the device.
All of the LX pins are connected to the LX PAD
on the device, which should be a sufficient con-
nection and will prevent the need to connect
the resistor further into the LX plane.
The feedback components for the switcher and
the LDO need to be as close to the FB and FBL
pins of the device as possible to reduce the pos-
sibility of noise corrupting these analog signals.
"
"
"
"
"
"
"
"
BST, ILIM and LX
LX and BST are very noisy nodes and must be
routed to minimized the PCB area that is exposed
to these signals.
The connections for the boost capacitor
between the device and LX must be short and
directly connected to the LXBST (pin 13).
The connections for the current limit resistor
between the ILIM pin and LX must be as short as
possible and directly connected to pin 28 (LXS).
The LX node between the IC and the inductor
should be wide enough to handle the inductor
current and short enough to eliminate the pos-
sibility of LX noise corrupting other signals.
Multiple vias should be used to provide a good
connection to LX between the device and the
inductor.
Capacitors and Current Loops
The current loops between the input capacitors,
the device, the inductor, and the output capaci-
tors must be as close as possible to each other to
reduce IR drop across the copper.
All bypass and output capacitors must be con-
nected as close as possible to the pin on the
device.
Soft-Start Capacitor
The capacitor used for soft-start should be
located away from the BST pin and its capacitor.
If possible locate the boost capacitor on the
opposite side of the board form the IC and soft-
start capacitor.
"
"
"
"
"
"
"
"
"
"
相關PDF資料 |
PDF描述 |
|---|---|
| SC418ULTRT | IC REG DL BUCK/LINEAR 20MLPQ |
| SC424MLTRT | IC REG DL BUCK/LINEAR 28MLPQ |
| SC4250LISTRT | IC HOT SWAP CTRLR 8-SOIC |
| SC427MLTRT | IC REG DL BUCK/LINEAR 32MLPQ |
| SE95D,112 | IC SENSOR TEMP 2.8-5.5V SOT96-1 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SC4040 | 制造商:SEMTECH 制造商全稱:Semtech Corporation 功能描述:PRECISION SHUNT VOLTAGE REFERENCE |
| SC4040AS | 制造商:SEMTECH 制造商全稱:Semtech Corporation 功能描述:PRECISION SHUNT VOLTAGE REFERENCE |
| SC4040ASK | 制造商:SEMTECH 制造商全稱:Semtech Corporation 功能描述:PRECISION SHUNT VOLTAGE REFERENCE |
| SC4040ASK.TR | 制造商:Semtech Corporation 功能描述:IC V-REF PRECISION 2.5V 3SOT-23 T/R |
| SC4040AZ | 制造商:SEMTECH 制造商全稱:Semtech Corporation 功能描述:PRECISION SHUNT VOLTAGE REFERENCE |
發布緊急采購，3分鐘左右您將得到回復。