- 您現在的位置：買賣IC網 > PDF目錄98229 > THS8083APZP (TEXAS INSTRUMENTS INC) SPECIALTY CONSUMER CIRCUIT, PQFP100 PDF資料下載
參數資料
| 型號： | THS8083APZP |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 消費家電 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PQFP100 |
| 封裝： | GREEN, PLASTIC, HTQFP-100 |
| 文件頁數： | 28/63頁 |
| 文件大小： | 320K |
| 代理商： | THS8083APZP |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁當前第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁
321
PWDN_REF
Powers down internal top and bottom references for all channels (VREFT / VREFB). If powered down,
enables user to supply external VREFT / VREFB references on corresponding pins.
0 = active (default)
1 = powered down
PWDN_BGAP
Powers down bandgap reference. If powered down, enables user to supply external VMID (input common
mode voltage) on corresponding pin.
0 = active (default)
1 = powered down
DTO_DIS
Disables the DTO. Can be disabled when an external clock (EXT_ADCCLK) is used and the user does not
intend to use the PLL output on DTOCLK3. When the PLL is active, it can be used as the clock source for the
ADC channels or the ADC’s can still run from EXT_ADCCLK depending on the SEL_ADCCLK register
setting. Note that when the DTO is enabled and the device is configured to use an external clock, the DTO
clock is still available on the DTOCLK3 pin so it can be used as a general-purpose clock synthesizer for other
parts in the system, possibly the display clock if this is different from the input pixel clock.
Since the DTO is also used for internal clock generation, power should always be supplied to the PLL supply
pins, even when the ADC sampling clock is fed from EXT_ADCCLK and DTO_DIS is active.
0 = active (default)
1 = powered down
3.11.44 Register Name: AUX_CTRL
Subaddress: 31 (R/W)
X
MSB
LSB
X
CS_SEL
CS_DIS
TEST2
TEST1
TEST0
TACT
CS_SEL
Composite sync select. Selects the source of the composite sync for slicing.
0 = from Ch1 input
1 = from CS_IN input
CS_DIS
Enables/disables the composite sync output on terminal CS/TEST1. The state of the CS output is also
dependent on the clamp range (see Composite Sync Slicer section).
0 = enabled (default)
1 = disabled
TEST[2..0]
TACT
Used for TI factory testing only; should not be changed from its all-0 default value.
3.11.45 Register Name: CH1_RDBK
Subaddress: 32 (R)
CH1_RDBK7
MSB
LSB
CH1_RDBK6
CH1_RDBK5
CH1_RDBK4
CH1_RDBK3
CH1_RDBK2
CH1_RDBK1
CH1_RDBK0
CH1_RDBK[7..0]:
Readback register of ADC channel 1
Default: (changed during operation)
相關PDF資料 |
PDF描述 |
|---|---|
| THS8083APZPG4 | SPECIALTY CONSUMER CIRCUIT, PQFP100 |
| THS8083CPZP | SPECIALTY CONSUMER CIRCUIT, PQFP100 |
| THS8133ACPHP | PARALLEL, WORD INPUT LOADING, 0.005 us SETTLING TIME, 10-BIT DAC, PQFP48 |
| THS8133BCPHP | PARALLEL, WORD INPUT LOADING, 0.005 us SETTLING TIME, 10-BIT DAC, PQFP48 |
| THS8133BCPHPG4 | PARALLEL, WORD INPUT LOADING, 0.005 us SETTLING TIME, 10-BIT DAC, PQFP48 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| THS8083APZP | 制造商:Texas Instruments 功能描述:8BIT ADC 80MSPS TRIPLE SMD 8083 |
| THS8083APZPG4 | 功能描述:視頻模擬/數字化轉換器集成電路 Tr 8B 95MSPS 3.3V Vid & Graphics Dig RoHS:否 制造商:Texas Instruments 輸入信號類型:Differential 轉換器數量:1 ADC 輸入端數量:4 轉換速率:3 Gbps 分辨率:8 bit 結構: 輸入電壓:3.3 V 接口類型:SPI 信噪比: 電壓參考: 電源電壓-最大:3.45 V 電源電壓-最小:3.15 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:TCSP-48 封裝:Reel |
| THS8083CPZP | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| THS8083EVM | 制造商:Texas Instruments 功能描述:THS8083EVM - Bulk |
| THS8083T | 制造商:TI 制造商全稱:Texas Instruments 功能描述:Triple 8-Bit, 80 MSPS, 3.3-V Video and Graphics Digitizer With Digital PLL |
發布緊急采購，3分鐘左右您將得到回復。