SC418
27
Applications Information (continued)
All components connected to the FB pin must
be located near the pin. The FB traces should be
kept small and not routed near any noisy switch-
ing connections or power components.
Place the R
ILIM
resistor near the IC. For an accu-
rate I
LIM
current sense connection, route the R
ILIM
trace directly to the drain of the low-side MOSFET
(LX). Use an inner routing layer if needed.
Place the R
TON
resistor near the TON pin. Route
R
TON
to the TON pin and to AGND using short
traces and avoid all switching signals.
For the LDO components
The FBL resistors should be placed near
the FBL pin. The area of the FBL traces
should be minimized, avoiding all switch-
ing connections.
The top FBL resistor must route directly
to the LDO output capacitor. The LDO
load current should not flow through this
trace.
Bypass Capacitors
The device requires bypass capacitors for the following
pins.
VDDA pin with respect to AGND. This 0.糉
minimum capacitor must be placed and routed
close to the IC pins, on the same layer as the IC.
VDDP with respect to PGND. This 糉 minimum
capacitor must be placed and routed close to
the IC pins and on the same layer as the IC.
BST pin with respect to LX. This 0.糉 minimum
capacitor must be placed near the IC, on either
side of the PCB. Use short traces for the routing
between the capacitor and the IC.
VLDO pin with respect to AGND.
This is the LDO output capacitor.
The placement of this capacitor is not
critical, however for routing it is important
that the top FBL resistor connects directly
to this capacitor, and that the LDO load
current does not flow through this trace.
If VLDO is not used to power the device
then a minimum 糉 capacitor referenced
to AGND is required.
If VLDO is used to power the device then
"
"
"
"
?/DIV>
?/DIV>
"
"
"
"
?/DIV>
?/DIV>
?/DIV>
?/DIV>
the VDDA and VDDP capacitors also
function as the LDO output capacitor.
For VDDA, a minimum 0.糉 capacitor ref-
erenced to AGND is required. For VDDP,
a minimum 糉 capacitor referenced to
PGND is required.
VIN pin with respect to AGND. This 0.糉
minimum capacitor must be placed and routed
close to the IC pins. This capacitor provides
noise filtering for the input to the internal LDO.
"
相關代理商/技術參數 |
參數描述 |
SC419 |
制造商:SEMTECH 制造商全稱:Semtech Corporation 功能描述:EcoSpeedTM DC-DC Converter with Integrated Boost Diode |
SC419970CGCR2 |
制造商:Motorola Inc 功能描述: |
SC419EVB |
制造商:SEMTECH 制造商全稱:Semtech Corporation 功能描述:EcoSpeedTM DC-DC Converter with Integrated Boost Diode |
SC419ULTRT |
功能描述:IC REG CTRLR BUCK PWM 20-MLPQ RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 切換控制器 系列:EcoSpeed®, SmartDrive™ 特色產品:LM3753/54 Scalable 2-Phase Synchronous Buck Controllers 標準包裝:1 系列:PowerWise® PWM 型:電壓模式 輸出數:1 頻率 - 最大:1MHz 占空比:81% 電源電壓:4.5 V ~ 18 V 降壓:是 升壓:無 回掃:無 反相:無 倍增器:無 除法器:無 Cuk:無 隔離:無 工作溫度:-5°C ~ 125°C 封裝/外殼:32-WFQFN 裸露焊盤 包裝:Digi-Reel® 產品目錄頁面:1303 (CN2011-ZH PDF) 其它名稱:LM3754SQDKR |
SC41E6 |
制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:SIEMENS ANNOUNCES A SUB-MICTON GENERATION OF CHANNELLESS GATE-ARRAYS BASED ON THE PROVEN MEGALOGIC PROCESS |
主站蜘蛛池模板:
名山县|
治多县|
襄汾县|
玉山县|
宽甸|
阳曲县|
河池市|
洛阳市|
泸定县|
堆龙德庆县|
青阳县|
台安县|
山西省|
保靖县|
如东县|
富川|
荆门市|
安国市|
莱阳市|
高阳县|
巴彦淖尔市|
弋阳县|
布拖县|
铜川市|
库伦旗|
临江市|
修水县|
蒙山县|
肥乡县|
营口市|
牡丹江市|
民县|
永川市|
油尖旺区|
山东|
桃园市|
聊城市|
汽车|
彰化市|
承德市|
宜阳县|