- 您現在的位置：買賣IC網 > PDF目錄373969 > AD9858BSV (ANALOG DEVICES INC) 1 GSPS Direct Digital Synthesizer PDF資料下載
參數資料
| 型號： | AD9858BSV |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 數字信號處理外設 |
| 英文描述： | 1 GSPS Direct Digital Synthesizer |
| 中文描述： | DSP-NUM CONTROLLED OSCILLATOR, PQFP100 |
| 封裝： | PLASTIC, MS-026AED-HD, TQFP-100 |
| 文件頁數： | 26/32頁 |
| 文件大小： | 1412K |
| 代理商： | AD9858BSV |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁當前第26頁第27頁第28頁第29頁第30頁第31頁第32頁
AD9858
CFR<19>: Clear Phase Accumulator Bit
Rev. A | Page 26 of 32
When CFR<19> = 1, the phase accumulator is synchronously
cleared and is held clear until CFR<19> is returned to a Logic 0
state (default).
CFR<18>: Not Used.
CFR<17>: PLL Fast-Lock Enable Bit
When CFR<17> = 0 (default), the PLL’s fast-lock algorithm is
disabled.
When CFR<17> = 1, the PLL’s fast-lock algorithm is active.
CFR<16>
This bit allows the user to control whether or not the PLL’s fast-
locking algorithm uses the tuning word value to determine
whether or not to enter fast-locking mode.
When CFR<16> = 0 (default), the PLL’s fast-locking algorithm
considers the relationship between the programmed frequency
tuning word and the instantaneous frequency as part of the
locking process.
When CFR<16> = 1, the PLL’s fast-locking algorithm does not
use the frequency tuning word as part of the locking process.
CFR<15>: Frequency Sweep Enable Bit
When CFR<15> = 0 (default), the device is in the single-
tone mode.
When CFR<15> = 1, the device is in the frequency-
sweep mode.
CFR<14>: Sine/Cosine Select Bit
When CFR<14> = 0 (default), the angle-to-amplitude
conversion logic employs a cosine function.
When CFR<14> = 1, the angle-to-amplitude conversion logic
employs a sine function.
CFR<13>: Charge Pump Current Offset Bit
When CFR<13> = 0 (default), the charge pump operates with
normal current settings.
When CFR<13> = 1, the charge pump operates with offset
current settings (see charge pump description).
CFR<12:11>: Phase Detector Reference
Input Frequency Divider Ratio
These bits set the phase detector divide value per Table 10.
Table 10.
CFR<12:11>
00b
01b
1xb
Phase Detector
Divider Ratio (N)
1
2
4
Notes
Default Value
LSB Ignored
CFR<10>: Charge Pump Polarity Select Bit
When CFR<10> = 0 (default), the charge pump is set up for
operation with a ground-referenced VCO. In this mode, the
charge pump sources current when the frequency at PD
IN
is
less
than the frequency at DIV
IN
. It sinks current when the opposite
is true.
When CFR<10> = 1, the charge pump is set up for a supply-
referenced VCO. In this mode, the charge pump’s source/sink
operation is opposite that for a ground-referenced VCO.
CFR<9:8>: Phase Detector Feedback
Input Frequency Divider Ratio
These bits set the phase detector divide value per Table 11.
Table 11.
CFR<9:8>
Ratio (M)
00b
1
01b
2
1xb
4
CFR<7>: Not Used
Phase Detector Divider
Notes
Default value
LSB ignored
CFR<6>: Disable Bit for the 2 GHz REFCLK Divider
When CFR<6> = 0 (default), the REFCLK divide-by-2 function
is not bypassed. REFCLK input can be up to 2 GHz.
When CFR<6> = 1, the REFCLK divide-by-2 function is
disabled. REFCLK input must be no more than 1 GHz.
CFR<5>: SYNCLK Disable Bit
When CFR<5> = 0 (default), the SYNCLK pin is active.
When CFR<5> = 1, the SYNCLK pin assumes a static Logic 0
state (disabled). In this state, the pin drive logic is shut down to
keep noise generated by the digital circuitry at a minimum.
However, the synchronization circuitry remains active
(internally) to maintain normal device timing.
CFR<4:2>: Power-Down Bits
Active high (Logic 1) powers down the respective function.
Writing a Logic 1 to all three bits causes the device to enter full-
sleep mode.
CFR<4> is used to shut down the analog mixer stage
(default = 1).
相關PDF資料 |
PDF描述 |
|---|---|
| AD9858PCB | 1 GSPS Direct Digital Synthesizer |
| AD9858 | 1 GSPS Direct Digital Synthesizer |
| AD9858FDPCB | 1 GSPS Direct Digital Synthesizer |
| AD9859 | 400 MSPS, 10-Bit, 1.8 V CMOS Direct Digital Synthesizer |
| AD9859YSV | 400 MSPS, 10-Bit, 1.8 V CMOS Direct Digital Synthesizer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9858BSVZ | 功能描述:IC DDS DAC 10BIT 1GSPS 100-TQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 直接數字合成 (DDS) 系列:- 產品變化通告:Product Discontinuance 27/Oct/2011 標準包裝:2,500 系列:- 分辨率（位）:10 b 主 fclk:25MHz 調節字寬（位）:32 b 電源電壓:2.97 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR) |
| AD9858FDPCB | 制造商:AD 制造商全稱:Analog Devices 功能描述:1 GSPS Direct Digital Synthesizer |
| AD9858PCB | 制造商:AD 制造商全稱:Analog Devices 功能描述:1 GSPS Direct Digital Synthesizer |
| AD9858TLPCB | 制造商:AD 制造商全稱:Analog Devices 功能描述:1 GSPS Direct Digital Synthesizer |
| AD9858XSV | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。