- 您現在的位置：買賣IC網 > PDF目錄374046 > ADV7180 (Analog Devices, Inc.) 10-Bit, 4 x Oversampling SDTV Video Decoder PDF資料下載
參數資料
| 型號： | ADV7180 |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | 10-Bit, 4 x Oversampling SDTV Video Decoder |
| 中文描述： | 10位，4個采樣標清視頻解碼器 |
| 文件頁數： | 20/112頁 |
| 文件大小： | 1320K |
| 代理商： | ADV7180 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁當前第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁
ADV7180
Timing Signals Output Enable
TIM_OE, Address 0x04 [3]
The TIM_OE bit should be regarded as an addition to the TOD
bit. Setting it high forces the output drivers for HS, VS, and
FIELD into the active state (that is, driving state) even if the
TOD bit is set. If TIM_OE is set to low, the HS, VS, and FIELD
pins are three-stated depending on the TOD bit. This
functionality is beneficial if the decoder is to be used as a
timing generator only. This may be the case if only the timing
signals are to be extracted from an incoming signal, or if the
part is in free-run mode, where a separate chip can output a
company logo, for example.
For more information on three-state control, refer to the
Three-State Output Drivers section and the Three-State LLC
Driver section.
Individual drive strength controls are provided via the
DR_STR_XX bits.
When TIM_OE is 0 (default), HS, VS, and FIELD are three-
stated according to the TOD bit.
When TIM_OE is 1, HS, VS, and FIELD are forced active all the
time.
Drive Strength Selection (Data)
DR_STR[1:0], Address 0xF4 [5:4]
For EMC and crosstalk reasons, it may be desirable to
strengthen or weaken the drive strength of the output drivers.
The DR_STR[1:0] bits affect the P[15:0] output drivers.
For more information on three-state control, refer to the Drive
Strength Selection (Clock) and the Drive Strength Selection
(Sync) sections.
Rev. A | Page 20 of 112
Table 13. DR_STR Function
DR_STR[1:0]
00
01 (default)
10
11
Description
Low drive strength (1×)
Medium-low drive strength (2×)
Medium-high drive strength (3×)
High drive strength (4×)
Drive Strength Selection (Clock)
DR_STR_C[1:0], Address 0xF4 [3:2]
The DR_STR_C[1:0] bits can be used to select the strength of
the clock signal output driver (LLC pin). For more information,
refer to the Drive Strength Selection (Sync) and the Drive
Strength Selection (Data) sections.
Table 14. DR_STR_C Function
DR_STR_C[1:0]
00
01 (default)
10
11
Description
Low drive strength (1×)
Medium-low drive strength (2×)
Medium-high drive strength (3×)
High drive strength (4×)
Drive Strength Selection (Sync)
DR_STR_S[1:0], Address 0xF4 [1:0]
The DR_STR_S[1:0] bits allow the user to select the strength of
the synchronization signals with which HS, VS, and FIELD are
driven. For more information, refer to the Drive Strength
Selection (Data) section.
Table 15. DR_STR_S Function
DR_STR_S[1:0]
00
01 (default)
10
11
Description
Low drive strength (1×)
Medium-low drive strength (2×)
Medium-high drive strength (3×)
High drive strength (4×)
Enable Subcarrier Frequency Lock Pin
EN_SFL_PIN, Address 0x04 [1]
The EN_SFL_PIN bit enables the output of subcarrier lock
information (also known as Genlock) from the ADV7180 core
to an encoder in a decoder/encoder back-to-back arrangement.
When EN_SFL_PIN is 0 (default), the subcarrier frequency lock
output is disabled.
When EN_SFL_PIN is 1, the subcarrier frequency lock
information is presented on the SFL pin.
Polarity LLC Pin
PCLK, Address 0x37 [0]
The polarity of the clock that leaves the ADV7180 via the LLC
pin can be inverted using the PCLK bit.
Changing the polarity of the LLC clock output may be
necessary to meet the setup-and-hold time expectations of
follow-on chips.
When PCLK is 0, the LLC output polarity is inverted.
When PCLK is 1 (default), the LLC output polarity is normal
(see the Timing Specifications section).
相關PDF資料 |
PDF描述 |
|---|---|
| ADV7180BCPZ | 10-Bit, 4 x Oversampling SDTV Video Decoder |
| ADV7180BSTZ | 10-Bit, 4 x Oversampling SDTV Video Decoder |
| ADV7181 | Multiformat SDTV Video Decoder |
| ADV7181B | Multiformat SDTV Video Decoder |
| ADV7181BBCPZ | Multiformat SDTV Video Decoder |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADV7180_12 | 制造商:AD 制造商全稱:Analog Devices 功能描述:10-Bit, 4?? Oversampling SDTV Video Decoder |
| ADV7180BCP32Z | 制造商:Analog Devices 功能描述:10-BIT, 4? OVERSAMPLING SDTV VIDEO DECODER - Trays |
| ADV7180BCP32Z-RL | 制造商:Analog Devices 功能描述:IC |
| ADV7180BCPZ | 功能描述:IC VIDEO DECODER SDTV 40-LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 視頻處理 系列:- 標準包裝:250 系列:- 類型:電平移位器 應用:LCD 電視機/監控器 安裝類型:表面貼裝 封裝/外殼:28-WFQFN 裸露焊盤 供應商設備封裝:28-WQFN（4x4）裸露焊盤 包裝:帶卷 (TR) 其它名稱:296-32523-2TPS65198RUYT-ND |
| ADV7180BCPZ | 制造商:Analog Devices 功能描述:IC VIDEO DECODER 10BIT 57.27MSPS LFCSP40 |
發布緊急采購，3分鐘左右您將得到回復。