- 您現在的位置：買賣IC網 > PDF目錄373971 > AD9929BBCZ (ANALOG DEVICES INC) CCD Signal Processor with Precision Timing Generator PDF資料下載
參數資料
| 型號： | AD9929BBCZ |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 消費家電 |
| 英文描述： | CCD Signal Processor with Precision Timing Generator |
| 中文描述： | SPECIALTY CONSUMER CIRCUIT, PBGA64 |
| 封裝： | 9 X 9 MM, LEAD FREE, PLASTIC, MO-205-AB, CSBGA-64 |
| 文件頁數： | 60/64頁 |
| 文件大小： | 558K |
| 代理商： | AD9929BBCZ |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁當前第60頁第61頁第62頁第63頁第64頁
AD9929
CIRCUIT LAYOUT INFORMATION
The AD9929 typical circuit connection is shown in Figure 71.
The PCB layout is critical in achieving good image quality from
the AD9929 product. All of the supply pins must be decoupled
to ground with good quality, high frequency chip capacitors.
The 0.1 μF decoupling capacitors should be located as close as
possible to the supply pins, and should have a very low induc-
tance path to a continuous ground plane. There should also be a
4.7 μF or larger capacitor for each main supply, although it is
not necessary for each individual pin.
Rev. A | Page 60 of 64
In most applications it is easier and recommended to share the
same supply for AVDD, DVDD, TCVDD, RGVDD, and HVDD,
as long as the individual supply pins are separately bypassed at
each supply pin. A separate 3 V supply should be used for
DRVDD with this supply pin decoupled to the same ground
plane as the rest of the chip. A separate ground for DRVSS is not
recommended.
The vertical driver VM supply pins can be connected to indi-
vidual supplies or to the same supply, depending on the appli-
cation requirement for the mid-level voltage on the vertical
outputs. These pins may also be directly connected to the
common ground plane, as shown in Figure 71.
The analog bypass pins, REFB, REFT, should also be carefully
decoupled to ground as close as possible to their respective pins.
The analog input, CCDIN, capacitor should also be located
close to the pin.
The H1, H2, and RG printed circuit board traces should be
designed to have low inductance to avoid excessive distortion of
the signals. Heavier traces are recommended because of the
large transient current demand by the CCD on H1 and H2. If
possible, physically locate the AD9929 close to the CCD to
reduce the inductance on these lines. As always, the routing
path should be as direct as possible from the AD9929 to the
CCD. Careful trace impedance considerations must also be
made with applications using a flex printed circuit (FPC) con-
necting the CCD to the AD9929. FPC trace impedances can be
controlled by applying a solid uniform ground plane under the
H1, H2, and RG traces. This helps minimize the amount of
overshoot and ringing on these signals at the CCD inputs.
相關PDF資料 |
PDF描述 |
|---|---|
| AD9929 | CCD Signal Processor with Precision Timing Generator |
| AD9937 | CCD Signal Processor with Precision Timing⑩ Generator |
| AD9937KCP | CCD Signal Processor with Precision Timing⑩ Generator |
| AD9937KCPRL | TVPS00RF-25-35PB W/ PC CONTACT |
| AD9942 | Dual-Channel, 14-Bit CCD Signal Processor with Precision Timing⑩ Core |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9929BBCZRL | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD9937 | 制造商:AD 制造商全稱:Analog Devices 功能描述:CCD Signal Processor with Precision Timing⑩ Generator |
| AD9937BCPZ-24 | 制造商:Analog Devices 功能描述: |
| AD9937BCPZ-27 | 功能描述:IC CCD SIGNAL PROC/GEN 制造商:analog devices inc. 系列:* 零件狀態:上次購買時間 標準包裝:1 |
| AD9937BCPZRL-24 | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。