
19
A
I
D
INTMSK register (register 17)
The INTMSK register defines the valid interrupt sources
allowed to assert interrupt request pin. Table-7.17 lists
all the bits of this register.
SPEED register (register 18)
The SPEED register specifies or indicates the speed
rate of each port. It is read-only, unless the bit-12 of
register-25 is set (through POS to disable automatic
PHY management). At read-only mode, it indicates
the speed achieved through PHY management. At the
write-able mode, the control CPU will be able to assign
speed rate for each port. Table-7.18 describes all the
bit of this register.
LINK register (register 19)
The LINK register specifies or indicates the link status
of each port. It is read-only, unless bit-12 of register-
25 is set (through POS, to disable automatic PHY man-
agement). At read-only mode, it indicates the result
achieved by PHY management. At write-able mode,
Table-7.17: INTMSK Register
Bit
Enable "system initialization
completion" to interrupt
Enable "internal system error"
to interrupt
Enable "port partition event"
to interrupt
3
Reserved
4
Reserved
5
Reserved
6
Reserved
7
Reserved
Description
Default
0
1
1
1
2
1
1
1
1
1
1
Table-7.18: SPEED Register
Bit
0 - Port 0 at 10 Mbps
1 - Port 0 at 100 Mbps
0 - Port 1 at 10 Mbps
1 - Port 1 at 100 Mbps
0 - Port 2 at 10 Mbps
1 - Port 2 at 100 Mbps
0 - Port 3 at 10 Mbps
1 - Port 3 at 100 Mbps
0 - Port 4 at 10 Mbps
1 - Port 4 at 100 Mbps
0 - Port 5 at 10 Mbps
1 - Port 5 at 100 Mbps
0 - Port 6 at 10 Mbps
1 - Port 6 at 100 Mbps
0 - Port 7 at 10 Mbps
1 - Port 7 at 100 Mbps
0 - Port 8 at 10 Mbps
1 - Port 8 at 100 Mbps
0 - Port 9 at 10 Mbps
1 - Port 9 at 100 Mbps
0 - Port 10 at 10 Mbps
1 - Port 10 at 100 Mbps
0 - Port 11 at 10 Mbps
1 - Port 11 at 100 Mbps
0 - Port 12 at 10 Mbps
1 - Port 12 at 100 Mbps
0 - Port 13 at 10 Mbps
1 - Port 13 at 100 Mbps
0 - Port 14 at 10 Mbps
1 - Port 14 at 100 Mbps
0 - Port 15 at 10 Mbps
1 - Port 15 at 100 Mbps
0 - Port 16 at 10 Mbps
1 - Port 16 at 100 Mbps
0 - Port 17 at 10 Mbps
1 - Port 17 at 100 Mbps
0 - Port 18 at 10 Mbps
1 - Port 18 at 100 Mbps
0 - Port 19 at 10 Mbps
1 - Port 19 at 100 Mbps
0 - Port 20 at 10 Mbps
1 - Port 20 at 100 Mbps
0 - Port 21 at 10 Mbps
1 - Port 21 at 100 Mbps
0 - Port 22 at 10 Mbps
1 - Port 22 at 100 Mbps
0 - Port 23 at 10 Mbps
1 - Port 23 at 100 Mbps
Default
0
1
2
Description
3
4
5
6
7
8
9
10
11
12
13
14
0
23
19
20
21
22
15
16
17
18