- 您現在的位置：買賣IC網 > PDF目錄367493 > L84225 L84225 100BaseTX/FX/10BaseT Physical Layer Device technical manual 4/02 PDF資料下載
參數資料
| 型號： | L84225 |
| 英文描述： | L84225 100BaseTX/FX/10BaseT Physical Layer Device technical manual 4/02 |
| 中文描述： | L84225 100BaseTX/FX/10BaseT物理層設備的技術手冊，4月2日 |
| 文件頁數： | 37/118頁 |
| 文件大小： | 890K |
| 代理商： | L84225 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁當前第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁
Functional Description
Copyright 1999-2002 by LSI Logic Corporation. All rights reserved.
37 of 118
April, 2002
2.11.4 Collision Indication
Collision can be programmed to appear on the LED2 pin by appropriately
setting the LED definition bits in the MI serial port Global Configuration
register.
Section 2.23, “LED Drivers,” page 48
, describes the
programmable LED definition bit settings. When the LED2 pin is
programmed to be a collision detect output, the pin is asserted low for
100 ms every time a collision occurs.
2.12 Start of Packet
2.12.1 100 Mbps
Start of packet for 100 Mbps mode is indicated by a unique Start of
Stream Delimiter (SSD). The SSD pattern consists of the two /J/K/ 5B
symbols inserted at the beginning of the packet in place of the first two
preamble symbols, as defined in IEEE 802.3 Clause 24 and shown in
Table 3
and
Figure 2
.
The transmit SSD is generated by the 4B5B encoder and the /J/K/
symbols are inserted by the 4B5B encoder at the beginning of the
transmit data packet in place of the first two 5B symbols of the preamble,
as shown in
Figure 2
.
The receive pattern is detected by the 4B5B decoder by examining
groups of 10 consecutive code bits (two 5B words) from the descrambler.
Between packets, the receiver will be detecting the idle pattern, which is
5B /I/ symbols. While in the idle state, CRS and RXDV are deasserted.
If the receiver is in the idle state and 10 consecutive code bits from the
receiver consist of the /J/K/ symbols, the start of packet is detected, data
reception is begun, CRS and RXDV are asserted, and /5/5/ symbols are
substituted in place of the /J/K/ symbols.
If the receiver is in the idle state and 10 consecutive code bits from the
receiver consist of a pattern that is neither /I/ I/ nor /J/K/ symbols but
contains at least 2 non-contiguous 0's, then activity is detected but the
start of packet is considered to be faulty and a False Carrier Indication
(also referred to as bad SSD) is signaled to the controller interface. When
False Carrier is detected CRS is asserted, RXDV remains deasserted,
RXD[3:0]=1110 while RXER is asserted, and the bad SSD bit is set in
the MI serial port Channel Status Output register. Once a False Carrier
相關PDF資料 |
PDF描述 |
|---|---|
| L84302 | L84302 Quad 100/10 Mbps 4-Port Ethernet Controller with RMON/SNMP Management Counters technical manual 4/02 |
| L8560 | Low-Power SLIC with Ringing |
| L8567 | SLIC for Peoples Republic of China Applications |
| L8567-32PLCC | Telecommunication IC |
| L8567-44PLCC | Telecommunication IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| L84225/B1 | 制造商:LSI Corporation 功能描述: |
| L8446-04 | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES |
| L8446-06 | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES |
| L8446-07 | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES |
| L8446-41 | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:CW LASER DIODES |
發布緊急采購，3分鐘左右您將得到回復。