
M82510
24. RXFDRECEIVED CHARACTER FLAGS
RxFDReceive Flags Register
271072–37
This register contains additional information about
the character in the RXD register. It is loaded by the
Rx Machine simultaneously with the RXD register.
ROKDReceived Character OKD
This bit indicates
that the character in RXD no parity or framing error.
The parity error is not included in the s/w parity
mode.
RxNDReceived Character NoisyD
The character
in RXD was noisy. This bit, valid only in 16X sam-
pling mode, indicates that the received character
had non-identical samples for at least one of its bits.
RPEDReceive Character Parity ErrorD
This bit in-
dicates that the RxD character had a Parity Error.
However, in S/W Parity mode it holds the received
parity bit as is.
ACRDAddress/Control Character MarkerD
This
bit indicates that the character in RXD is either:
A control CharacterDin normal Mode.
An Address Character in uLAN Mode.
RFEDReceive Character Framing ErrorD
Indi-
cates that no Stop bit was found for the character in
RXD.
NOTE:
A Framing Error will be generated for the first char-
acter of the Break sequence.
RNDDNinth Bit of Received CharacterD
The
most significant bit of the character in RXD is written
into this bit. This bit is zero for characters with less
than nine bits.
BKFDBreak FlagD
Indicates that the character is
part of a ‘‘break’’ sequence.
25. FLRDFIFO LEVEL REGISTER
FLRDFIFO Level Register
271072–38
This register holds the current Receive and Transmit
FIFO occupancy levels.
RFL2, RFL1, RFL0DReceive FIFO Level of Occu-
pancyD
These three bits indicate the level of Occu-
pancy of the Rx FIFO. The valid range is zero (000)
to four (100).
TFL2, TFL1, TFL0DTransmit FIFO Level of Occu-
pancyD
These three bits indicate the level of occu-
pancy in the transmit FIFO. The valid range is zero
(000) to four (100).
30